IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v299y2024ics0360544224011861.html
   My bibliography  Save this article

Study on the thermal characteristics and heat-insulation ability of gel-stabilized foam used for preventing the spontaneous combustion of coal

Author

Listed:
  • Shi, Quanlin
  • Sun, Yongjiang
  • He, Zhenyu
  • Yan, Hang
  • Nie, Xiaoyang
  • Xia, Cuiping

Abstract

Gel-stabilized foam serves a critical role in preventing spontaneous combustion of coal by impeding heat transfer from the coal-fire area to adjacent safe areas. To elucidate the thermal characteristics of gel-stabilized foam, the microstructure and heat-transfer characteristics were investigated. The results revealed that gel-stabilized foam was an accumulation system of many stable and closed bubbles, and there was a layer of gel structure on the bubble surface. This gel layer endows the bubbles with exceptional heat-insulation capability by effectively encapsulating air. To further analyze the relationship of heat-transfer characteristics and foam structure parameters, a theoretical thermal-conductivity model was established to revel the thermal characteristics of gel-stabilized foam. Moreover, the experimental tests were conducted to verify the accuracy of theoretical model, and found that the fitting errors were around 8 %, affirming the model's suitability for gel-stabilized foam. Notably, the theoretical model demonstrated that foam's thermal-conductivity was only monotonically related to foam expansion ratios in theory. In addition, the heat-insulation experiments indicated that the heat-transfer rate of foam depended not only on the thermal-conductivity but also on the foam's stability, both of which were affected by the expansion ratio. Hence, the effective heat-insulation time (EHT) was proposed to assess gel-stabilized foam's heat-insulation characteristics. The heat-insulation ability tests results showed that EHT values initially increased and then decreased with rising foam expansion ratios, primarily influenced by the volume of air encapsulated within the foam. Particularly noteworthy were the test results indicating that gel-stabilized foam with an expansion ratio of 10 times and a stacking thickness of at least 15 cm exhibited excellent heat-insulation capability against heat transfer from the spontaneous combustion zones. The research may provide a theoretical foundation and offer guidance for the prospective utilization of gel-stabilized foam in coal mines.

Suggested Citation

  • Shi, Quanlin & Sun, Yongjiang & He, Zhenyu & Yan, Hang & Nie, Xiaoyang & Xia, Cuiping, 2024. "Study on the thermal characteristics and heat-insulation ability of gel-stabilized foam used for preventing the spontaneous combustion of coal," Energy, Elsevier, vol. 299(C).
    • Handle: RePEc:eee:energy:v:299:y:2024:i:c:s0360544224011861
    DOI: 10.1016/j.energy.2024.131413
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544224011861
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2024.131413?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Shi, Quanlin & Qin, Botao & Hao, Yinghao & Li, Hongbiao, 2022. "Experimental investigation of the flow and extinguishment characteristics of gel-stabilized foam used to control coal fire," Energy, Elsevier, vol. 247(C).
    2. Chao Han & Shibin Nie & Zegong Liu & Jinian Yang & Hong Zhang & Haoran Zhang & Jiayi Li & Zihan Wang, 2022. "A Novel Highly Stable Biomass Gel Foam Based on Double Cross-Linked Structure for Inhibiting Coal Spontaneous Combustion," Energies, MDPI, vol. 15(14), pages 1-12, July.
    3. Shi, Quanlin & Jiang, Wenjie & Qin, Botao & Hao, Mingyue & He, Zhenyu, 2023. "Effects of oxidation temperature on microstructure and spontaneous combustion characteristics of coal: A case study of Shendong long-flame coal," Energy, Elsevier, vol. 284(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Fan, Xin-li & Ma, Li & Sheng, You-jie & Liu, Xi-xi & Wei, Gao-ming & Liu, Shang-ming, 2023. "Experimental investigation on the characteristics of XG/GG/HPAM gel foam and prevention of coal spontaneous combustion," Energy, Elsevier, vol. 284(C).
    2. Xi, Xian & Tao, Yifan & Jiang, Shuguang & Yin, Chenchen, 2023. "Study on the formation mechanism and mechanical properties of composite foam slurry material for mine plugging," Energy, Elsevier, vol. 281(C).
    3. Xu, Yizhen & Qin, Botao & Shi, Quanlin & Hao, Mingyue & Shao, Xu & Jiang, Zhe & Ma, Zujie, 2023. "Study on the preparation and properties of colloidal gas foam concrete to prevent spontaneous combustion of coal," Energy, Elsevier, vol. 283(C).
    4. Lu, Wei & Gao, Ao & Liang, Yuntao & He, Zhenglong & Li, Jinliang & Sun, Yong & Song, Shuanglin & Meng, Shaocong, 2023. "Stable and highly efficient HMDS terminated m-Cresol inhibitor for inhibiting coal spontaneous combustion," Energy, Elsevier, vol. 282(C).
    5. Xi, Xian & Jiang, Shuguang & Shi, Quanlin, 2023. "Study on the flow and bonding-reinforcement characteristics of composite foam slurry material used to block mine leakage," Energy, Elsevier, vol. 263(PD).
    6. Meng, Xianliang & Sun, Jiali & Chu, Ruizhi & Fan, Lulu & Jiang, Xiaofeng & Tang, Ludeng & Zheng, Donglin, 2023. "Effect of active functional groups in coal on the release behavior of small molecule gases during low-temperature oxidation," Energy, Elsevier, vol. 273(C).
    7. Liu, Wei & Zhang, Fengjie & Gao, Tiegang & Chu, Xiangyu & Qin, Yueping, 2023. "Efficient prevention of coal spontaneous combustion using cooling nitrogen injection in a longwall gob: An application case," Energy, Elsevier, vol. 281(C).
    8. Qu, Baolin & Zhu, Hongqing & Wang, Jingxin & Li, Binrui & Xie, Linhao & Liao, Qi & Hu, Lintao, 2024. "Dynamic evolution of terahertz permittivity of lignite during oxidation: Microstructural insights," Applied Energy, Elsevier, vol. 363(C).
    9. Xi, Xian & Jiang, Shuguang & Shi, Quanlin & Yin, Chenchen, 2023. "Experimental investigation on the leakage plugging and fire extinguishment characteristics of industrial solid waste-based composite foam slurry materials," Energy, Elsevier, vol. 269(C).
    10. Tian, Chang & Zhao, Jinlong & Li, Xinjiang & Chen, Cheng & Zhang, Jianping & Huang, Hong, 2024. "Experimental study of thermal stability and spread characteristics of gel-protein foam for liquid tank fires," Energy, Elsevier, vol. 294(C).
    11. Wang, Gang & Xie, Shuliang & Huang, Qiming & Wang, Enmao & Wang, Shuxin, 2023. "Study on the performances of fluorescent tracers for the wetting area detection of coal seam water injection," Energy, Elsevier, vol. 263(PE).
    12. Chen, Jian & Lu, Yi & Tang, Guoxin & Yang, Yuxuan & Shao, Shuzhen & Ding, Yangwei, 2023. "Research and prevention of upper remaining coal spontaneous combustion induced by air leakage in multi-inclination regenerated roof: A case study in the Luwa coal mine, China," Energy, Elsevier, vol. 275(C).
    13. Tian, Chang & Zhao, Jinlong & Yang, Junhui & Zhang, Jianping & Yang, Rui, 2023. "Preparation and characterization of fire-extinguishing efficiency of novel gel-protein foam for liquid pool fires," Energy, Elsevier, vol. 263(PC).
    14. Sun, Lulu & Zhan, Mingyu & Zhang, Chen & Shi, Quanlin & Huang, Qiming & Wang, Wenjie, 2022. "Experimental study on prevention of spontaneous combustion of coal by ionic surfactant solution injection in coal seam," Energy, Elsevier, vol. 260(C).
    15. Sun, Lulu & Zhang, Chen & Wang, Gang & Huang, Qiming & Shi, Quanlin, 2022. "Research on the evolution of pore and fracture structures during spontaneous combustion of coal based on CT 3D reconstruction," Energy, Elsevier, vol. 260(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:299:y:2024:i:c:s0360544224011861. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.