IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v263y2023ipds0360544222029334.html
   My bibliography  Save this article

Study on the flow and bonding-reinforcement characteristics of composite foam slurry material used to block mine leakage

Author

Listed:
  • Xi, Xian
  • Jiang, Shuguang
  • Shi, Quanlin

Abstract

To study the fluidity and bonding-reinforcement characteristics of composite foam slurry material (CFSM) on broken coal mass, the hydration mechanism, the rheological law, and the process of bonding-reinforcement were analyzed systematically. The results revealed that the Herschel-Bulkely model could describe the rheological properties of CFSM accurately by fitting the shear stress-shear rate curve (fitting coefficient>0.99), indicating that CFSM was a pseudoplastic fluid with yield stress. Based on the rheological model of CFSM, the diffusion equation of the material in the fissure channel was theoretically deduced, and it was obtained that the material rheological index, viscosity and crack width were the key factors affecting the diffusion performance. Moreover, the surface morphology and functional groups of the CFSM-coal contact interface showed that the active groups on the CFSM and coal molecules exhibited chemical bonding and physical coating at the interface. An interface bonding model of CFSM-coal composed of a weak effect layer, an enrichment layer, a contact layer and an etching penetration layer was established.

Suggested Citation

  • Xi, Xian & Jiang, Shuguang & Shi, Quanlin, 2023. "Study on the flow and bonding-reinforcement characteristics of composite foam slurry material used to block mine leakage," Energy, Elsevier, vol. 263(PD).
    • Handle: RePEc:eee:energy:v:263:y:2023:i:pd:s0360544222029334
    DOI: 10.1016/j.energy.2022.126047
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544222029334
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2022.126047?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Numbi, B.P. & Zhang, J. & Xia, X., 2014. "Optimal energy management for a jaw crushing process in deep mines," Energy, Elsevier, vol. 68(C), pages 337-348.
    2. Zhao, Jingyu & Wang, Tao & Deng, Jun & Shu, Chi-Min & Zeng, Qiang & Guo, Tao & Zhang, Yuxuan, 2020. "Microcharacteristic analysis of CH4 emissions under different conditions during coal spontaneous combustion with high-temperature oxidation and in situ FTIR," Energy, Elsevier, vol. 209(C).
    3. Yi Lu & Botao Qin, 2015. "Identification and control of spontaneous combustion of coal pillars: a case study in the Qianyingzi Mine, China," Natural Hazards: Journal of the International Society for the Prevention and Mitigation of Natural Hazards, Springer;International Society for the Prevention and Mitigation of Natural Hazards, vol. 75(3), pages 2683-2697, February.
    4. Shi, Quanlin & Qin, Botao & Hao, Yinghao & Li, Hongbiao, 2022. "Experimental investigation of the flow and extinguishment characteristics of gel-stabilized foam used to control coal fire," Energy, Elsevier, vol. 247(C).
    5. Sarhosis, V. & Jaya, A.A. & Thomas, H.R., 2016. "Economic modelling for coal bed methane production and electricity generation from deep virgin coal seams," Energy, Elsevier, vol. 107(C), pages 580-594.
    6. Weitao Liu & Yueyun Qin & Xiangxi Meng & Lifu Pang & Mengke Han & Zengmou Song, 2021. "Basic Experimental Study of Plasticity Material for Coal Rock Fracture Grouting Based on RSM-PCA Technology," Energies, MDPI, vol. 14(15), pages 1-20, July.
    7. Wang, Yanyong & Wang, Xiaoguang & Xu, Huyang & Wang, Yanqing & Jiang, Chuanyin, 2022. "Numerical investigation of the influences of geological controlling factors on heat extraction from hydrothermal reservoirs by CO2 recycling," Energy, Elsevier, vol. 252(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Xi, Xian & Jiang, Shuguang & Shi, Quanlin & Yin, Chenchen, 2023. "Experimental investigation on the leakage plugging and fire extinguishment characteristics of industrial solid waste-based composite foam slurry materials," Energy, Elsevier, vol. 269(C).
    2. Xi, Xian & Tao, Yifan & Jiang, Shuguang & Yin, Chenchen, 2023. "Study on the formation mechanism and mechanical properties of composite foam slurry material for mine plugging," Energy, Elsevier, vol. 281(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Meng, Xianliang & Sun, Jiali & Chu, Ruizhi & Fan, Lulu & Jiang, Xiaofeng & Tang, Ludeng & Zheng, Donglin, 2023. "Effect of active functional groups in coal on the release behavior of small molecule gases during low-temperature oxidation," Energy, Elsevier, vol. 273(C).
    2. Liu, Wei & Zhang, Fengjie & Gao, Tiegang & Chu, Xiangyu & Qin, Yueping, 2023. "Efficient prevention of coal spontaneous combustion using cooling nitrogen injection in a longwall gob: An application case," Energy, Elsevier, vol. 281(C).
    3. Xi, Xian & Jiang, Shuguang & Shi, Quanlin & Yin, Chenchen, 2023. "Experimental investigation on the leakage plugging and fire extinguishment characteristics of industrial solid waste-based composite foam slurry materials," Energy, Elsevier, vol. 269(C).
    4. Sun, Lulu & Zhan, Mingyu & Zhang, Chen & Shi, Quanlin & Huang, Qiming & Wang, Wenjie, 2022. "Experimental study on prevention of spontaneous combustion of coal by ionic surfactant solution injection in coal seam," Energy, Elsevier, vol. 260(C).
    5. Wang, Feiran & Tan, Bo & Gao, Liyang & Huang, Jiliang & Guo, Meiyan & Wang, Haiyan & Fang, Xiyang & Fu, Shuhui & Li, Tianze, 2024. "Research on the mechanism of coal adsorption of CO2 hindering oxygen," Energy, Elsevier, vol. 296(C).
    6. Tao, Ming & Yang, Zheng & Zhao, Yan & Wu, Xingyu & Wu, Chengqing, 2024. "Failure characteristics of microwave heat-treated stressed sandstone: Implications for deep rock breakage using TBM cutting," Energy, Elsevier, vol. 292(C).
    7. Kagiri, Charles & Wanjiru, Evan M. & Zhang, Lijun & Xia, Xiaohua, 2018. "Optimized response to electricity time-of-use tariff of a compressed natural gas fuelling station," Applied Energy, Elsevier, vol. 222(C), pages 244-256.
    8. Xi, Xian & Tao, Yifan & Jiang, Shuguang & Yin, Chenchen, 2023. "Study on the formation mechanism and mechanical properties of composite foam slurry material for mine plugging," Energy, Elsevier, vol. 281(C).
    9. Xu, Yizhen & Qin, Botao & Shi, Quanlin & Hao, Mingyue & Shao, Xu & Jiang, Zhe & Ma, Zujie, 2023. "Study on the preparation and properties of colloidal gas foam concrete to prevent spontaneous combustion of coal," Energy, Elsevier, vol. 283(C).
    10. Wang, Feiran & Tan, Bo & Zan, Xiaoyan & Huang, Jiliang & Fang, Xiyang & Fu, Shuhui & Wang, Haiyan & Li, Tianze & Qi, Qingjie, 2024. "Molecular simulation study of microstructural evolution during low-temperature oxidation of coal," Energy, Elsevier, vol. 290(C).
    11. Witold Kawalec & Robert Król & Natalia Suchorab, 2020. "Regenerative Belt Conveyor versus Haul Truck-Based Transport: Polish Open-Pit Mines Facing Sustainable Development Challenges," Sustainability, MDPI, vol. 12(21), pages 1-15, November.
    12. Lu, Wei & Gao, Ao & Liang, Yuntao & He, Zhenglong & Li, Jinliang & Sun, Yong & Song, Shuanglin & Meng, Shaocong, 2023. "Stable and highly efficient HMDS terminated m-Cresol inhibitor for inhibiting coal spontaneous combustion," Energy, Elsevier, vol. 282(C).
    13. Zhao, Jingyu & Hang, Gai & Song, Jiajia & Lu, Shiping & Ming, Hanqi & Chang, Jiaming & Deng, Jun & Zhang, Yanni & Shu, Chi-Min, 2023. "Spontaneous oxidation kinetics of weathered coal based upon thermogravimetric characteristics," Energy, Elsevier, vol. 275(C).
    14. Wanjiru, Evan M. & Sichilalu, Sam M. & Xia, Xiaohua, 2017. "Optimal control of heat pump water heater-instantaneous shower using integrated renewable-grid energy systems," Applied Energy, Elsevier, vol. 201(C), pages 332-342.
    15. Meng Zhao & Anmin Wang & Daiyong Cao & Yingchun Wei & Liqi Ding, 2022. "Differences in Macromolecular Structure Evolution during the Pyrolysis of Vitrinite and Inertinite Based on In Situ FTIR and XRD Measurements," Energies, MDPI, vol. 15(15), pages 1-18, July.
    16. Tim A. Moore & Mike C. Friederich, 2021. "Defining Uncertainty: Comparing Resource/Reserve Classification Systems for Coal and Coal Seam Gas," Energies, MDPI, vol. 14(19), pages 1-35, September.
    17. Jiang, Haipeng & Bi, Mingshu & Huang, Lei & Zhou, Yonghao & Gao, Wei, 2022. "Suppression mechanism of ultrafine water mist containing phosphorus compounds in methane/coal dust explosions," Energy, Elsevier, vol. 239(PA).
    18. Liu, Hao & Li, Zenghua & Yang, Yongliang & Miao, Guodong & Wang, Guoqin & Li, Purui, 2024. "Low reaction threshold of ambient temperature oxidation of coal: Perspective from oxygen concentration and airflow rate," Energy, Elsevier, vol. 304(C).
    19. Liu, Weitao & Sun, Yida & Meng, Xiangxi & Qin, Yueyun, 2023. "Experimental analysis of Nano-SiO2 modified waterborne epoxy resin on the properties and microstructure of cement-based grouting materials," Energy, Elsevier, vol. 268(C).
    20. Saramak, Daniel & Leśniak, Katarzyna, 2024. "Impact of HPGR operational pressing force and material moisture on energy consumption and crushing product fineness in high-pressure grinding processes," Energy, Elsevier, vol. 302(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:263:y:2023:i:pd:s0360544222029334. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.