IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v254y2022ipcs0360544222013561.html
   My bibliography  Save this article

Solution acidity and temperature induced anodic dissolution and degradation of through-plane electrical conductivity of Au/TiN coated metal bipolar plates used in PEMFC

Author

Listed:
  • Fan, Hong-Qiang
  • Wu, Yuan-Min
  • Su, Shuo
  • Shi, Dong-Dong
  • Wang, Xian-Zong
  • Behnamian, Yashar
  • Zhang, Jie-Yu
  • Li, Qian

Abstract

A novel composite coating of gold/titanium nitride on stainless steel (Au/TiN/SS) was developed by introducing Au dots onto a TiN coating to improve the corrosion resistance and electrical conductivity of stainless steel bipolar plates for the polymer electrolyte membrane fuel cell (PEMFC). The effects of temperature and pH on conductivity and corrosion resistance of the Au/TiN/SS in a simulated PEMFC environment were investigated. The results showed that the interfacial contact resistance of TiN coating reduced from 5.48 mΩ cm2 to 1.72 mΩ cm2 after introducing the Au dots, indicating that Au dots can enhance the interfacial conductivity of the composite coating on stainless steel. The increases of solution temperature and acidity enhanced the dissolution of TiN as well as the delamination of Au dots from the composite coating, and the corrosion current density (icorr) of Au/TiN coating increased in high temperature and strong acidic environments. The thin layer of TiNxOy and TiO2 around the Au dots was preferentially dissolved to detach the Au from the composite coating, therefore induced the degradation of through-plane electrical conductivity of the Au/TiN coated metal bipolar plates.

Suggested Citation

  • Fan, Hong-Qiang & Wu, Yuan-Min & Su, Shuo & Shi, Dong-Dong & Wang, Xian-Zong & Behnamian, Yashar & Zhang, Jie-Yu & Li, Qian, 2022. "Solution acidity and temperature induced anodic dissolution and degradation of through-plane electrical conductivity of Au/TiN coated metal bipolar plates used in PEMFC," Energy, Elsevier, vol. 254(PC).
    • Handle: RePEc:eee:energy:v:254:y:2022:i:pc:s0360544222013561
    DOI: 10.1016/j.energy.2022.124453
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544222013561
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2022.124453?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Zhang, Weixin & Yi, Peiyun & Peng, Linfa & Lai, Xinmin, 2018. "Strategy of alternating bias voltage on corrosion resistance and interfacial conductivity enhancement of TiCx/a-C coatings on metallic bipolar plates in PEMFCs," Energy, Elsevier, vol. 162(C), pages 933-943.
    2. Liu, Jiaran & Tan, Jinzhu & Yang, Weizhan & Li, Yang & Wang, Chao, 2021. "Better electrochemical performance of PEMFC under a novel pneumatic clamping mechanism," Energy, Elsevier, vol. 229(C).
    3. Pugal Mani, S. & Rajendran, N., 2017. "Corrosion and interfacial contact resistance behavior of electrochemically nitrided 316L SS bipolar plates for proton exchange membrane fuel cells," Energy, Elsevier, vol. 133(C), pages 1050-1062.
    4. Yang, Meijun & Zhang, Dongming, 2014. "Effect of surface treatment on the interfacial contact resistance and corrosion resistance of Fe–Ni–Cr alloy as a bipolar plate for polymer electrolyte membrane fuel cells," Energy, Elsevier, vol. 64(C), pages 242-247.
    5. Yan, Wei-Mon & Chen, Chen-Yu & Liang, Chia-Hao, 2019. "Comparison of performance degradation of high temperature PEM fuel cells with different bipolar plates," Energy, Elsevier, vol. 186(C).
    6. Huang, Kaikai & Zhang, Dongming & Hu, Mingming & Hu, Qinghui, 2014. "Cr2O3/C composite coatings on stainless steel 304 as bipolar plate for proton exchange membrane fuel cell," Energy, Elsevier, vol. 76(C), pages 816-821.
    7. Ren, Zhijun & Zhang, Dongming & Wang, Zaiyi, 2012. "Stacks with TiN/titanium as the bipolar plate for PEMFCs," Energy, Elsevier, vol. 48(1), pages 577-581.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Wang, Xuefei & Luo, Hong & Cheng, Hongxu & Yue, Luo & Deng, Zhanfeng & Yao, Jizheng & Li, Xiaogang, 2024. "Investigation on the performance of Pt surface modified Ti bipolar plates in proton exchange membrane water electrolyzer," Applied Energy, Elsevier, vol. 357(C).
    2. Shu, Qingzhu & Shi, Jiefu & Li, Zhuxin & Xing, Danmin & Sun, Xin & Zhang, Yong & Song, Shuqin & Tang, Yu & Yang, Shuxiu & Gao, Han & Xia, Chuxuan & Zhao, Mingming & Li, Xufeng & Zhao, Hong, 2024. "Failure of Au-coated metallic bipolar plates for fuel cell in a 3-kW stack under the new European driving cycle," Applied Energy, Elsevier, vol. 355(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Bhosale, Amit C. & Rengaswamy, Raghunathan, 2019. "Interfacial contact resistance in polymer electrolyte membrane fuel cells: Recent developments and challenges," Renewable and Sustainable Energy Reviews, Elsevier, vol. 115(C).
    2. Chen, Chen-Yu & Su, Sheng-Chun, 2018. "Effects of assembly torque on a proton exchange membrane fuel cell with stamped metallic bipolar plates," Energy, Elsevier, vol. 159(C), pages 440-447.
    3. Hu, Bin & He, Guangjian & Chang, Fulu & Yang, Han & Cao, Xianwu & Yin, Xiaochun, 2022. "Low filler and highly conductive composite bipolar plates with synergistic segregated structure for enhanced proton exchange membrane fuel cell performance," Energy, Elsevier, vol. 251(C).
    4. Kim, Ah-Reum & Shin, Seungho & Um, Sukkee, 2016. "Multidisciplinary approaches to metallic bipolar plate design with bypass flow fields through deformable gas diffusion media of polymer electrolyte fuel cells," Energy, Elsevier, vol. 106(C), pages 378-389.
    5. Zhang, Weixin & Yi, Peiyun & Peng, Linfa & Lai, Xinmin, 2018. "Strategy of alternating bias voltage on corrosion resistance and interfacial conductivity enhancement of TiCx/a-C coatings on metallic bipolar plates in PEMFCs," Energy, Elsevier, vol. 162(C), pages 933-943.
    6. Kariya, Tetsuro & Yanagimoto, Katsu & Funakubo, Hiroshi & Shudo, Toshio, 2015. "Effects of porous flow field type separators using sintered Ni-based alloy powders on interfacial contact resistances and fuel cell performances," Energy, Elsevier, vol. 87(C), pages 134-141.
    7. Hu, Qinghui & Zhang, Dongming & Fu, Hao, 2015. "Effect of flow-field dimensions on the formability of Fe–Ni–Cr alloy as bipolar plate for PEM (proton exchange membrane) fuel cell," Energy, Elsevier, vol. 83(C), pages 156-163.
    8. Najmi, Aezid-Ul-Hassan & Anyanwu, Ikechukwu S. & Xie, Xu & Liu, Zhi & Jiao, Kui, 2021. "Experimental investigation and optimization of proton exchange membrane fuel cell using different flow fields," Energy, Elsevier, vol. 217(C).
    9. Yan, Wei-Mon & Lin, Jian-Cheng & Chen, Chen-Yu & Amani, Mohammad, 2023. "Performance evaluation of TiN/Ti coatings on the aluminum alloy bipolar plates for PEM fuel cells," Renewable Energy, Elsevier, vol. 216(C).
    10. Zhang, Zhonghao & Guo, Mengdi & Yu, Zhonghao & Yao, Siyue & Wang, Jin & Qiu, Diankai & Peng, Linfa, 2022. "A novel cooperative design with optimized flow field on bipolar plates and hybrid wettability gas diffusion layer for proton exchange membrane unitized regenerative fuel cell," Energy, Elsevier, vol. 239(PD).
    11. Zhiming Zhang & Jun Zhang & Tong Zhang, 2022. "Endplate Design and Topology Optimization of Fuel Cell Stack Clamped with Bolts," Sustainability, MDPI, vol. 14(8), pages 1-13, April.
    12. Wu, Horng-Wen & Ho, Tzu-Yi & Han, Yueh-Jung, 2021. "Parametric optimization of wall-mounted cuboid rows installed in interdigitated flow channel of HT-PEM fuel cells," Energy, Elsevier, vol. 216(C).
    13. Ren, Peng & Pei, Pucheng & Chen, Dongfang & Zhang, Lu & Li, Yuehua & Song, Xin & Wang, Mingkai & Wang, He, 2022. "Corrosion of metallic bipolar plates accelerated by operating conditions in a simulated PEM fuel cell cathode environment," Renewable Energy, Elsevier, vol. 194(C), pages 1277-1287.
    14. Liu, Jiaran & Tan, Jinzhu & Yang, Weizhan & Li, Yang & Wang, Chao, 2021. "Better electrochemical performance of PEMFC under a novel pneumatic clamping mechanism," Energy, Elsevier, vol. 229(C).
    15. Zhiming Zhang & Jun Zhang & Yapeng Shang & Tong Zhang, 2022. "Study on the Optimal Cross-Sectional Shapes of the PEMFC Endplates by Using a Moment of Inertia and 3D FEM Models," Sustainability, MDPI, vol. 14(19), pages 1-15, October.
    16. Fan, Lixin & Tu, Zhengkai & Chan, Siew Hwa, 2022. "Technological and Engineering design of a megawatt proton exchange membrane fuel cell system," Energy, Elsevier, vol. 257(C).
    17. Huu Linh Nguyen & Jeasu Han & Xuan Linh Nguyen & Sangseok Yu & Young-Mo Goo & Duc Dung Le, 2021. "Review of the Durability of Polymer Electrolyte Membrane Fuel Cell in Long-Term Operation: Main Influencing Parameters and Testing Protocols," Energies, MDPI, vol. 14(13), pages 1-34, July.
    18. Rezk, Hegazy & Olabi, A.G. & Ferahtia, Seydali & Sayed, Enas Taha, 2022. "Accurate parameter estimation methodology applied to model proton exchange membrane fuel cell," Energy, Elsevier, vol. 255(C).
    19. Zhou, Xinpei & Chen, Wei & Zhang, Bin, 2022. "Proposed hybrid system with integrated SOFC, gas turbine, and compressor-assisted absorption refrigerator using [mmim]DMP/CH3OH as working fluid," Energy, Elsevier, vol. 261(PB).
    20. Wang, Yulin & Zhang, Penghui & Gao, Yuyao & He, Wei & Zhao, Yulong & Wang, Xiaodong, 2022. "Optimal design of cathode gas diffusion layer with arrayed grooves for performance enhancement of a PEM fuel cell," Renewable Energy, Elsevier, vol. 199(C), pages 697-709.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:254:y:2022:i:pc:s0360544222013561. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.