IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v246y2022ics036054422200319x.html
   My bibliography  Save this article

Experimental study on energy storage performances of packed bed with different solid materials

Author

Listed:
  • Zhou, Hao
  • Lai, Zhenya
  • Cen, Kefa

Abstract

The physical properties of the solid materials as energy storage mediums are one of the main parameters that affect the design of the packed bed. Different solar applications may require different heating rates and temperatures, so choosing appropriate storage materials is essential. This paper compares the applicability of sintered ore particles, aluminium oxide balls, and rock crushed as sensible heat storage materials. The results show that the volumetric heat capacity of the sinter at 200 °C is 3253.7 kJ/(m3·K), which is between aluminium oxide and rock. Rock is only suitable for heat storage below 550 °C, while sinter is the best candidate material for storing heat at ultra-high temperatures as high as 1000 °C. Moreover, the energy storage tests of packed beds using three materials under different operating conditions were also carried out. The results show that the heat capacity and voidage of the bed are the most critical factors affecting the thermal behavior of the bed, while the thermal conductivity of the material has a minor effect. After the system is stable, the energy recovery efficiency of the rock, aluminium oxide and sinter bed can reach 73.7%, 69.3%, and 66.8%, respectively, at a flow rate of 175 m3/h.

Suggested Citation

  • Zhou, Hao & Lai, Zhenya & Cen, Kefa, 2022. "Experimental study on energy storage performances of packed bed with different solid materials," Energy, Elsevier, vol. 246(C).
    • Handle: RePEc:eee:energy:v:246:y:2022:i:c:s036054422200319x
    DOI: 10.1016/j.energy.2022.123416
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S036054422200319X
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2022.123416?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Mawire, Ashmore & Taole, Simeon H., 2011. "A comparison of experimental thermal stratification parameters for an oil/pebble-bed thermal energy storage (TES) system during charging," Applied Energy, Elsevier, vol. 88(12), pages 4766-4778.
    2. Mawire, A. & McPherson, M. & van den Heetkamp, R.R.J. & Taole, S.H., 2010. "Experimental volumetric heat transfer characteristics between oil and glass pebbles in a small glass tube storage," Energy, Elsevier, vol. 35(3), pages 1256-1263.
    3. Calderón-Vásquez, Ignacio & Segovia, Valentina & Cardemil, José M. & Barraza, Rodrigo, 2021. "Assessing the use of copper slags as thermal energy storage material for packed-bed systems," Energy, Elsevier, vol. 227(C).
    4. Mawire, A. & McPherson, M. & Heetkamp, R.R.J. van den & Mlatho, S.J.P., 2009. "Simulated performance of storage materials for pebble bed thermal energy storage (TES) systems," Applied Energy, Elsevier, vol. 86(7-8), pages 1246-1252, July.
    5. Ammar, A.S.A. & Ghoneim, A.A., 1991. "Optimization of a sensible heat storage unit packed with spheres of a local material," Renewable Energy, Elsevier, vol. 1(1), pages 91-95.
    6. Chai, Lei & Wang, Liang & Liu, Jia & Yang, Liang & Chen, Haisheng & Tan, Chunqing, 2014. "Performance study of a packed bed in a closed loop thermal energy storage system," Energy, Elsevier, vol. 77(C), pages 871-879.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ouyang, Tiancheng & Qin, Peijia & Xie, Shutao & Tan, Xianlin & Pan, Mingming, 2023. "Flexible dispatch strategy of purchasing-selling electricity for coal-fired power plant based on compressed air energy storage," Energy, Elsevier, vol. 267(C).
    2. Mao, Qianjun & Cao, Wenlong, 2023. "Effect of variable capsule size on energy storage performances in a high-temperature three-layered packed bed system," Energy, Elsevier, vol. 273(C).
    3. Ji, Mengting & Lv, Laiquan & Li, Huaan & Zhou, Hao, 2024. "Experimental study of solid particles in thermal energy storage systems for shell and tube heat exchanger: Effect of particle size and flow direction," Renewable Energy, Elsevier, vol. 231(C).
    4. Yousef, Bashria A.A. & Radwan, Ali & Haridy, Salah & Alajmi, Noura, 2024. "Performance evaluation of a sand energy storage unit using response surface methodology," Energy, Elsevier, vol. 289(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Al-Azawii, Mohammad M.S. & Theade, Carter & Bueno, Pablo & Anderson, Ryan, 2019. "Experimental study of layered thermal energy storage in an air-alumina packed bed using axial pipe injections," Applied Energy, Elsevier, vol. 249(C), pages 409-422.
    2. Lizarraga-Garcia, Enrique & Mitsos, Alexander, 2014. "Effect of heat transfer structures on thermoeconomic performance of solid thermal storage," Energy, Elsevier, vol. 68(C), pages 896-909.
    3. Mawire, Ashmore, 2013. "Experimental and simulated thermal stratification evaluation of an oil storage tank subjected to heat losses during charging," Applied Energy, Elsevier, vol. 108(C), pages 459-465.
    4. Calderón-Vásquez, Ignacio & Cortés, Eduardo & García, Jesús & Segovia, Valentina & Caroca, Alejandro & Sarmiento, Cristóbal & Barraza, Rodrigo & Cardemil, José M., 2021. "Review on modeling approaches for packed-bed thermal storage systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 143(C).
    5. Li, Gang, 2016. "Sensible heat thermal storage energy and exergy performance evaluations," Renewable and Sustainable Energy Reviews, Elsevier, vol. 53(C), pages 897-923.
    6. Mawire, Ashmore & Taole, Simeon H., 2011. "A comparison of experimental thermal stratification parameters for an oil/pebble-bed thermal energy storage (TES) system during charging," Applied Energy, Elsevier, vol. 88(12), pages 4766-4778.
    7. Bruch, A. & Molina, S. & Esence, T. & Fourmigué, J.F. & Couturier, R., 2017. "Experimental investigation of cycling behaviour of pilot-scale thermal oil packed-bed thermal storage system," Renewable Energy, Elsevier, vol. 103(C), pages 277-285.
    8. Prasanna, U.R. & Umanand, L., 2011. "Modeling and design of a solar thermal system for hybrid cooking application," Applied Energy, Elsevier, vol. 88(5), pages 1740-1755, May.
    9. Robert Morgan & Christian Rota & Emily Pike-Wilson & Tim Gardhouse & Cian Quinn, 2020. "The Modelling and Experimental Validation of a Cryogenic Packed Bed Regenerator for Liquid Air Energy Storage Applications," Energies, MDPI, vol. 13(19), pages 1-17, October.
    10. Novo, Amaya V. & Bayon, Joseba R. & Castro-Fresno, Daniel & Rodriguez-Hernandez, Jorge, 2010. "Review of seasonal heat storage in large basins: Water tanks and gravel-water pits," Applied Energy, Elsevier, vol. 87(2), pages 390-397, February.
    11. Chai, Lei & Wang, Liang & Liu, Jia & Yang, Liang & Chen, Haisheng & Tan, Chunqing, 2014. "Performance study of a packed bed in a closed loop thermal energy storage system," Energy, Elsevier, vol. 77(C), pages 871-879.
    12. Xu, Chao & Wang, Zhifeng & He, Yaling & Li, Xin & Bai, Fengwu, 2012. "Sensitivity analysis of the numerical study on the thermal performance of a packed-bed molten salt thermocline thermal storage system," Applied Energy, Elsevier, vol. 92(C), pages 65-75.
    13. Sedighi, Mohammadreza & Padilla, Ricardo Vasquez & Rose, Andrew & Taylor, Robert A., 2022. "Optical analysis of a semi-transparent packed bed of spheres for next-generation volumetric solar receivers," Energy, Elsevier, vol. 252(C).
    14. Marti, Jan & Geissbühler, Lukas & Becattini, Viola & Haselbacher, Andreas & Steinfeld, Aldo, 2018. "Constrained multi-objective optimization of thermocline packed-bed thermal-energy storage," Applied Energy, Elsevier, vol. 216(C), pages 694-708.
    15. Kumaresan, G. & Santosh, R. & Raju, G. & Velraj, R., 2018. "Experimental and numerical investigation of solar flat plate cooking unit for domestic applications," Energy, Elsevier, vol. 157(C), pages 436-447.
    16. Gutierrez, Andrea & Miró, Laia & Gil, Antoni & Rodríguez-Aseguinolaza, Javier & Barreneche, Camila & Calvet, Nicolas & Py, Xavier & Inés Fernández, A. & Grágeda, Mario & Ushak, Svetlana & Cabeza, Luis, 2016. "Advances in the valorization of waste and by-product materials as thermal energy storage (TES) materials," Renewable and Sustainable Energy Reviews, Elsevier, vol. 59(C), pages 763-783.
    17. Prasanna, U.R. & Umanand, L., 2011. "Optimization and design of energy transport system for solar cooking application," Applied Energy, Elsevier, vol. 88(1), pages 242-251, January.
    18. Bi, Yuehong & Guo, Tingwei & Zhang, Liang & Chen, Lingen & Sun, Fengrui, 2010. "Entropy generation minimization for charging and discharging processes in a gas-hydrate cool storage system," Applied Energy, Elsevier, vol. 87(4), pages 1149-1157, April.
    19. Schwarzmayr, Paul & Birkelbach, Felix & Walter, Heimo & Hofmann, René, 2024. "Exergy efficiency and thermocline degradation of a packed bed thermal energy storage in partial cycle operation: An experimental study," Applied Energy, Elsevier, vol. 360(C).
    20. Kumar, Anil & Kim, Man-Hoe, 2017. "Solar air-heating system with packed-bed energy-storage systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 72(C), pages 215-227.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:246:y:2022:i:c:s036054422200319x. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.