IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v231y2021ics0360544221011841.html
   My bibliography  Save this article

Design improvement of volumetric pump for engine cooling in the transportation sector

Author

Listed:
  • Fatigati, Fabio
  • Di Battista, Davide
  • Cipollone, Roberto

Abstract

Internal combustion engine (ICE) thermal management is one of the most attractive methods for reducing both fuel consumption and harmful emissions. Conventional ICE cooling uses a dynamic centrifugal pump, which is generally designed based on the maximum ICE power. Unfortunately, such devices present significant efficiency reductions when they are operated far from the design point. Therefore, a sliding vane rotating pump (SVRP) has been considered as a substitute for the centrifugal pump because its efficiency is not dependent on the revolution speed and head pressure. This study developed a mathematical model that could be used for designing and simulating an SVRP. Then, an SVRP was built and tested, and the results validated the model under a wide range of operating conditions. Once validated, the model was used as a software platform to improve the SVRP design using a novel approach based on the optimisation of the ports and shape. Moreover, the benefits of this SVRP were assessed by comparing electrical and mechanical actuation using the Worldwide Harmonised Light Vehicles Test Procedure (WLTP). A pump energy reduction of approximately 30% and a CO2 emission reduction of up to 1.4 g/km were obtained.

Suggested Citation

  • Fatigati, Fabio & Di Battista, Davide & Cipollone, Roberto, 2021. "Design improvement of volumetric pump for engine cooling in the transportation sector," Energy, Elsevier, vol. 231(C).
    • Handle: RePEc:eee:energy:v:231:y:2021:i:c:s0360544221011841
    DOI: 10.1016/j.energy.2021.120936
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544221011841
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2021.120936?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Fatigati, Fabio & Di Bartolomeo, Marco & Cipollone, Roberto, 2020. "On the effects of leakages in Sliding Rotary Vane Expanders," Energy, Elsevier, vol. 192(C).
    2. Senthil, Ramalingam & Pranesh, Ganesan & Silambarasan, Rajendran, 2019. "Leaf extract additives: A solution for reduction of NOx emission in a biodiesel operated compression ignition engine," Energy, Elsevier, vol. 175(C), pages 862-878.
    3. Jain, Ayush & Singh, Akhilendra Pratap & Agarwal, Avinash Kumar, 2017. "Effect of split fuel injection and EGR on NOx and PM emission reduction in a low temperature combustion (LTC) mode diesel engine," Energy, Elsevier, vol. 122(C), pages 249-264.
    4. Liu, Peng & Shu, Gequn & Tian, Hua, 2019. "How to approach optimal practical Organic Rankine cycle (OP-ORC) by configuration modification for diesel engine waste heat recovery," Energy, Elsevier, vol. 174(C), pages 543-552.
    5. Di Battista, D. & Cipollone, R., 2016. "Experimental and numerical assessment of methods to reduce warm up time of engine lubricant oil," Applied Energy, Elsevier, vol. 162(C), pages 570-580.
    6. Guillaume, Ludovic & Lemort, Vincent, 2019. "Comparison of different ORC typologies for heavy-duty trucks by means of a thermo-economic optimization," Energy, Elsevier, vol. 182(C), pages 706-728.
    7. Fabio Fatigati & Marco Di Bartolomeo & Davide Di Battista & Roberto Cipollone, 2019. "Experimental and Numerical Characterization of the Sliding Rotary Vane Expander Intake Pressure in Order to Develop a Novel Control-Diagnostic Procedure," Energies, MDPI, vol. 12(10), pages 1-17, May.
    8. Kwon, Hyukjoon & Ivantysynova, Monika, 2021. "Experimental and theoretical studies on energy characteristics of hydraulic hybrids for thermal management," Energy, Elsevier, vol. 223(C).
    9. Pan, Mingzhang & Wei, Haiqiao & Feng, Dengquan & Pan, Jiaying & Huang, Rong & Liao, Jinyang, 2018. "Experimental study on combustion characteristics and emission performance of 2-phenylethanol addition in a downsized gasoline engine," Energy, Elsevier, vol. 163(C), pages 894-904.
    10. Yap, Ken Shaun & Ooi, Kim Tiow & Chakraborty, Anutosh, 2018. "Analysis of the novel cross vane expander-compressor: Mathematical modelling and experimental study," Energy, Elsevier, vol. 145(C), pages 626-637.
    11. Teresa Castiglione & Pietropaolo Morrone & Luigi Falbo & Diego Perrone & Sergio Bova, 2020. "Application of a Model-Based Controller for Improving Internal Combustion Engines Fuel Economy," Energies, MDPI, vol. 13(5), pages 1-22, March.
    12. Giampieri, A. & Ling-Chin, J. & Ma, Z. & Smallbone, A. & Roskilly, A.P., 2020. "A review of the current automotive manufacturing practice from an energy perspective," Applied Energy, Elsevier, vol. 261(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Abdelilah Hilali & Najib El Ouanjli & Said Mahfoud & Ameena Saad Al-Sumaiti & Mahmoud A. Mossa, 2022. "Optimization of a Solar Water Pumping System in Varying Weather Conditions by a New Hybrid Method Based on Fuzzy Logic and Incremental Conductance," Energies, MDPI, vol. 15(22), pages 1-21, November.
    2. Di Giovine, Giammarco & Di Bartolomeo, Marco & Cipollone, Roberto, 2024. "An innovative triple-screw pump for engine cooling in the road transportation sector," Energy, Elsevier, vol. 304(C).
    3. Fatigati, Fabio & Di Bartolomeo, Marco & Cipollone, Roberto, 2022. "Development and experimental assessment of a Low Speed Sliding Rotary Vane Pump for heavy duty engine cooling systems," Applied Energy, Elsevier, vol. 327(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Fabio Fatigati & Marco Di Bartolomeo & Davide Di Battista & Roberto Cipollone, 2020. "Experimental Validation of a New Modeling for the Design Optimization of a Sliding Vane Rotary Expander Operating in an ORC-Based Power Unit," Energies, MDPI, vol. 13(16), pages 1-23, August.
    2. Li, Xiaoya & Xu, Bin & Tian, Hua & Shu, Gequn, 2021. "Towards a novel holistic design of organic Rankine cycle (ORC) systems operating under heat source fluctuations and intermittency," Renewable and Sustainable Energy Reviews, Elsevier, vol. 147(C).
    3. Xiong, Yaxuan & Zhang, Aitonglu & Peng, Xiaodong & Yao, Chenhua & Wang, Nan & Wu, Yuting & Xu, Qian & Ma, Chongfang, 2023. "Investigation of a sole gas expander for gas pressure regulation and energy recovery," Energy, Elsevier, vol. 281(C).
    4. Siva Krishna Reddy Dwarshala & Siva Subramaniam Rajakumar & Obula Reddy Kummitha & Elumalai Perumal Venkatesan & Ibham Veza & Olusegun David Samuel, 2023. "A Review on Recent Developments of RCCI Engines Operated with Alternative Fuels," Energies, MDPI, vol. 16(7), pages 1-27, April.
    5. Zhang, Wei & Chang, Shaoyue & Wu, Wei & Dong, Lihui & Chen, Zhaohui & Chen, Guisheng, 2019. "A diesel/natural gas dual fuel mechanism constructed to reveal combustion and emission characteristics," Energy, Elsevier, vol. 179(C), pages 59-75.
    6. Andrei, Mariana & Rohdin, Patrik & Thollander, Patrik & Wallin, Johanna & Tångring, Magnus, 2024. "Exploring a decarbonization framework for a Swedish automotive paint shop," Renewable and Sustainable Energy Reviews, Elsevier, vol. 200(C).
    7. Murthy, Anarghya Ananda & Krishan, Gopal & Shenoy, Praveen & Patil, Ishwaragouda S, 2024. "Theoretical, CFD modelling and experimental investigation of a four-intersecting-vane rotary expander," Applied Energy, Elsevier, vol. 353(PB).
    8. Guillermo Valencia Ochoa & Carlos Acevedo Peñaloza & Jorge Duarte Forero, 2019. "Thermoeconomic Optimization with PSO Algorithm of Waste Heat Recovery Systems Based on Organic Rankine Cycle System for a Natural Gas Engine," Energies, MDPI, vol. 12(21), pages 1-21, October.
    9. Pi, Dawei & Xue, Pengyu & Wang, Weihua & Xie, Boyuan & Wang, Hongliang & Wang, Xianhui & Yin, Guodong, 2023. "Automotive platoon energy-saving: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 179(C).
    10. Liu, Jian & Xu, Yantao & Zhang, Yaning & Shuai, Yong & Li, Bingxi, 2022. "Multi-objective optimization of low temperature cooling water organic Rankine cycle using dual pinch point temperature difference technologies," Energy, Elsevier, vol. 240(C).
    11. Lu, Beichen & Yu, Yanni & Tian, Mingqian & Chen, Yun & Zhang, Li & Liu, Yanjun, 2024. "Experimental study of a high-power generation platform for ocean thermal energy conversion," Energy, Elsevier, vol. 309(C).
    12. Pachiannan, Tamilselvan & Zhong, Wenjun & Rajkumar, Sundararajan & He, Zhixia & Leng, Xianying & Wang, Qian, 2019. "A literature review of fuel effects on performance and emission characteristics of low-temperature combustion strategies," Applied Energy, Elsevier, vol. 251(C), pages 1-1.
    13. Ettefaghi, Ehsanollah & Rashidi, Alimorad & Ghobadian, Barat & Najafi, G. & Ghasemy, Ebrahim & Khoshtaghaza, Mohammad Hadi & Delavarizadeh, Saman & Mazlan, Mohamed, 2021. "Bio-nano emulsion fuel based on graphene quantum dot nanoparticles for reducing energy consumption and pollutants emission," Energy, Elsevier, vol. 218(C).
    14. Ali, Mohamed Kamal Ahmed & Fuming, Peng & Younus, Hussein A. & Abdelkareem, Mohamed A.A. & Essa, F.A. & Elagouz, Ahmed & Xianjun, Hou, 2018. "Fuel economy in gasoline engines using Al2O3/TiO2 nanomaterials as nanolubricant additives," Applied Energy, Elsevier, vol. 211(C), pages 461-478.
    15. Yang, Xiao & He, Zhihong & Qiu, Penghua & Dong, Shikui & Tan, Heping, 2019. "Numerical investigations on combustion and emission characteristics of a novel elliptical jet-stabilized model combustor," Energy, Elsevier, vol. 170(C), pages 1082-1097.
    16. Mukun Yuan & Jian Liu & Zheyuan Chen & Qingda Guo & Mingzhe Yuan & Jian Li & Guangping Yu, 2024. "Predicting Energy Consumption for Hybrid Energy Systems toward Sustainable Manufacturing: A Physics-Informed Approach Using Pi-MMoE," Sustainability, MDPI, vol. 16(17), pages 1-27, August.
    17. Fabio Fatigati & Diego Vittorini & Yaxiong Wang & Jian Song & Christos N. Markides & Roberto Cipollone, 2020. "Design and Operational Control Strategy for Optimum Off-Design Performance of an ORC Plant for Low-Grade Waste Heat Recovery," Energies, MDPI, vol. 13(21), pages 1-23, November.
    18. Deb, Parthasarathi & Paul, Abhishek, 2024. "Enhancing the usability range of acetylene in CI engines through split injection of high-reactive fuel under RCCI operation: Optimized operability using an MCDM approach," Energy, Elsevier, vol. 308(C).
    19. Qinguo Zhang & Xiaojian Liu & Zheming Tong & Zhewu Cheng, 2023. "Research on Heat Generation Law and Cooling System Performance of Hydraulic System of Combined Machine Tool," Energies, MDPI, vol. 16(21), pages 1-16, October.
    20. Teresa Castiglione & Diego Perrone & Luciano Strafella & Antonio Ficarella & Sergio Bova, 2023. "Linear Model of a Turboshaft Aero-Engine Including Components Degradation for Control-Oriented Applications," Energies, MDPI, vol. 16(6), pages 1-18, March.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:231:y:2021:i:c:s0360544221011841. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.