IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v218y2021ics0360544220326281.html
   My bibliography  Save this article

Combustion characteristics of ignition processes for lean premixed swirling combustor under visual conditions

Author

Listed:
  • Shen, Wenkai
  • Liu, Li
  • Hu, Qiming
  • Liu, Guichuang
  • Wang, Jiwei
  • Zhang, Ning
  • Wu, Shaohua
  • Qiu, Penghua
  • Song, Shaowei

Abstract

The combustion characteristics of ignition processes under different ignition fuel ratios were studied on a natural gas-fueled micro gas turbine combustion chamber. With the changing of air mass flow, the equivalence ratio varied from 0.024 to 0.994 at which the fuel mass flow remained the same. The flue gas compositions were measured at the combustion chamber outlet, and used to calculate the combustion efficiency. To characterize the relative flame stability, optical measurements and digital image processing techniques were applied. The results indicate that the combustor can ignite successfully under the ignition fuel ratio conditions of 10%, 15%, and 20%, in which the corresponding equivalence ratios are 0.082–0.497, 0.082–0.746, and 0.098–0.994, respectively. Moreover, the combustion efficiency decreased with the descending equivalence ratio. However, the amount of CO and unburned CH4 in the combustion products increased as the equivalence ratio decreased. The heat release rate in the reaction zone and the morphological characteristics of the flame were obtained using the gray level of average flame images. Furthermore, the flame fluctuation was analyzed by coefficient of variation of the flame area, and the relative flame stability was analyzed by the probability distribution density of the relative flame area ratio. The appropriate equivalence ratios for ignition are around 0.245, 0.243–0.369, and 0.196–0.326 under the ignition fuel ratio conditions of 10%, 15%, and 20%. The ignition fuel ratio has considerable influence on combustion efficiency, combustion product, and flame stability.

Suggested Citation

  • Shen, Wenkai & Liu, Li & Hu, Qiming & Liu, Guichuang & Wang, Jiwei & Zhang, Ning & Wu, Shaohua & Qiu, Penghua & Song, Shaowei, 2021. "Combustion characteristics of ignition processes for lean premixed swirling combustor under visual conditions," Energy, Elsevier, vol. 218(C).
    • Handle: RePEc:eee:energy:v:218:y:2021:i:c:s0360544220326281
    DOI: 10.1016/j.energy.2020.119521
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544220326281
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2020.119521?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Rossi, Iacopo & Sorce, Alessandro & Traverso, Alberto, 2017. "Gas turbine combined cycle start-up and stress evaluation: A simplified dynamic approach," Applied Energy, Elsevier, vol. 190(C), pages 880-890.
    2. EidiAttarZade, Masoud & Tabejamaat, Sadegh & Mani, Mahmoud & Farshchi, Mohammad, 2019. "Numerically investigation of ignition process in a premixed methane-air swirl configuration," Energy, Elsevier, vol. 171(C), pages 830-841.
    3. Karvountzis-Kontakiotis, Apostolos & Andwari, Amin Mahmoudzadeh & Pesyridis, Apostolos & Russo, Salvatore & Tuccillo, Raffaele & Esfahanian, Vahid, 2018. "Application of Micro Gas Turbine in Range-Extended Electric Vehicles," Energy, Elsevier, vol. 147(C), pages 351-361.
    4. Reine, Alexandre & Bou Nader, Wissam, 2019. "Fuel consumption potential of different external combustion gas-turbine thermodynamic configurations for extended range electric vehicles," Energy, Elsevier, vol. 175(C), pages 900-913.
    5. Ruan, Can & Yu, Tao & Chen, Feier & Wang, Sixu & Cai, Weiwei & Lu, Xingcai, 2019. "Experimental characterization of the spatiotemporal dynamics of a turbulent flame in a gas turbine model combustor using computed tomography of chemiluminescence," Energy, Elsevier, vol. 170(C), pages 744-751.
    6. Mohammadian, Poorya Keshavarz & Saidi, Mohammad Hassan, 2019. "Simulation of startup operation of an industrial twin-shaft gas turbine based on geometry and control logic," Energy, Elsevier, vol. 183(C), pages 1295-1313.
    7. Zhang, R.C. & Fan, W.J. & Shi, Q. & Tan, W.L., 2014. "Combustion and emissions characteristics of dual-channel double-vortex combustion for gas turbine engines," Applied Energy, Elsevier, vol. 130(C), pages 314-325.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Zong, Chao & Ji, Chenzhen & Cheng, Jiaying & Zhu, Tong & Guo, Desan & Li, Chengqin & Duan, Fei, 2022. "Toward off-design loads: Investigations on combustion and emissions characteristics of a micro gas turbine combustor by external combustion-air adjustments," Energy, Elsevier, vol. 253(C).
    2. Park, Yeseul & Choi, Minsung & Choi, Gyungmin, 2022. "Fault detection of industrial large-scale gas turbine for fuel distribution characteristics in start-up procedure using artificial neural network method," Energy, Elsevier, vol. 251(C).
    3. Shen, Wenkai & Xing, Chang & Liu, Haiqing & Liu, Li & Hu, Qiming & Wu, Guohua & Yang, Yujia & Wu, Shaohua & Qiu, Penghua, 2022. "Exhaust gas recirculation effects on flame heat release rate distribution and dynamic characteristics in a micro gas turbine," Energy, Elsevier, vol. 249(C).
    4. Guo, Kaifang & Sun, Dechuan & Zeng, Zhuoxiong, 2023. "Numerical study of ignition process in vortex cold wall combustion chamber," Energy, Elsevier, vol. 262(PA).
    5. Bolegenova, Saltanat & Askarova, Аliya & Georgiev, Aleksandar & Nugymanova, Aizhan & Maximov, Valeriy & Bolegenova, Symbat & Mamedov, Bolat, 2023. "The use of plasma technologies to optimize fuel combustion processes and reduce emissions of harmful substances," Energy, Elsevier, vol. 277(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ren, Guizhou & Wang, Jinzhong & Chen, Changlei & Wang, Haoran, 2021. "A variable-voltage ultra-capacitor/battery hybrid power source for extended range electric vehicle," Energy, Elsevier, vol. 231(C).
    2. Guan, Jin & Lv, Xiaojing & Spataru, Catalina & Weng, Yiwu, 2021. "Experimental and numerical study on self-sustaining performance of a 30-kW micro gas turbine generator system during startup process," Energy, Elsevier, vol. 236(C).
    3. Ezzat, M.F. & Dincer, I., 2019. "Development and exergetic assessment of a new hybrid vehicle incorporating gas turbine as powering option," Energy, Elsevier, vol. 170(C), pages 112-119.
    4. Zhao, Yuling & He, Xiaomin & Li, Mingyu, 2020. "Effect of mainstream forced entrainment on the combustion performance of a gas turbine combustor," Applied Energy, Elsevier, vol. 279(C).
    5. Chen, Jinli & Xiao, Gang & Ferrari, Mario Luigi & Yang, Tianfeng & Ni, Mingjiang & Cen, Kefa, 2020. "Dynamic simulation of a solar-hybrid microturbine system with experimental validation of main parts," Renewable Energy, Elsevier, vol. 154(C), pages 187-200.
    6. Roberta De Robbio, 2023. "Micro Gas Turbine Role in Distributed Generation with Renewable Energy Sources," Energies, MDPI, vol. 16(2), pages 1-37, January.
    7. Erik Rosado-Tamariz & Miguel A. Zuniga-Garcia & Alfonso Campos-Amezcua & Rafael Batres, 2020. "A Framework for the Synthesis of Optimum Operating Profiles Based on Dynamic Simulation and a Micro Genetic Algorithm," Energies, MDPI, vol. 13(3), pages 1-23, February.
    8. Guo, Kaifang & Sun, Dechuan & Zeng, Zhuoxiong, 2023. "Numerical study of ignition process in vortex cold wall combustion chamber," Energy, Elsevier, vol. 262(PA).
    9. Chen, Longfei & Zhang, Zhichao & Lu, Yiji & Zhang, Chi & Zhang, Xin & Zhang, Cuiqi & Roskilly, Anthony Paul, 2017. "Experimental study of the gaseous and particulate matter emissions from a gas turbine combustor burning butyl butyrate and ethanol blends," Applied Energy, Elsevier, vol. 195(C), pages 693-701.
    10. Tammo Zobel & Andreas Ritter & Christopher H. Onder, 2023. "The Faster the Better? Optimal Warm-Up Strategies for a Micro Combined Heat and Power Plant," Energies, MDPI, vol. 16(10), pages 1-24, May.
    11. Leisen, Robin & Radek, Julian & Weber, Christoph, 2024. "Modeling combined-cycle power plants in a detailed electricity market model," Energy, Elsevier, vol. 298(C).
    12. Yan, Yunfei & Wu, Gange & Huang, Weipeng & Zhang, Li & Li, Lixian & Yang, Zhongqing, 2019. "Numerical comparison study of methane catalytic combustion characteristic between newly proposed opposed counter-flow micro-combustor and the conventional ones," Energy, Elsevier, vol. 170(C), pages 403-410.
    13. Li, Mingyu & Wang, Qian & He, Xiaomin & Xiao, Jiankun & Ma, Heng, 2022. "Effects of fuel injection on the combustion and emission performance of a trapped vortex combustor," Energy, Elsevier, vol. 252(C).
    14. Zhang, R.C. & Bai, N.J. & Fan, W.J. & Huang, X.Y. & Fan, X.Q., 2019. "Influence of flame stabilization and fuel injection modes on the flow and combustion characteristics of gas turbine combustor with cavity," Energy, Elsevier, vol. 189(C).
    15. Zhang, R.C. & Bai, N.J. & Fan, W.J. & Yan, W.H. & Hao, F. & Yin, C.M., 2018. "Flow field and combustion characteristics of integrated combustion mode using cavity with low flow resistance for gas turbine engines," Energy, Elsevier, vol. 165(PA), pages 979-996.
    16. Omar Mohamed & Ashraf Khalil, 2020. "Progress in Modeling and Control of Gas Turbine Power Generation Systems: A Survey," Energies, MDPI, vol. 13(9), pages 1-26, May.
    17. Amin Mahmoudzadeh Andwari & Apostolos Pesyridis & Vahid Esfahanian & Ali Salavati-Zadeh & Alireza Hajialimohammadi, 2019. "Modelling and Evaluation of Waste Heat Recovery Systems in the Case of a Heavy-Duty Diesel Engine," Energies, MDPI, vol. 12(7), pages 1-26, April.
    18. Rossi, Iacopo & Traverso, Alberto & Tucker, David, 2019. "SOFC/Gas Turbine Hybrid System: A simplified framework for dynamic simulation," Applied Energy, Elsevier, vol. 238(C), pages 1543-1550.
    19. Kim, Sangjo & Kim, Kuisoon & Son, Changmin, 2020. "A new transient performance adaptation method for an aero gas turbine engine," Energy, Elsevier, vol. 193(C).
    20. Qiang, Xiaoqing & Lu, Yao & Li, Jian, 2024. "Bleed air CFD modelling in aerodynamic simulation of A heavy duty gas turbine compressor," Energy, Elsevier, vol. 299(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:218:y:2021:i:c:s0360544220326281. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.