IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v203y2020ics0360544220309440.html
   My bibliography  Save this article

Combustion of a solid fuel material at motion

Author

Listed:
  • Turkyilmazoglu, Mustafa

Abstract

The present paper proposes a mathematical model for the ignition phenomenon of a non static combustible solid fuel bed under the exposure of a constant incoming heat flux impinging on the solid surface. The thermal behaviors in terms of temperature responses of the solids of thermally thin, thermally thick and thermally moderate (finite-depth) target materials are analytically evaluated. Having established asymptotic relations, analytical estimates for the ignition time and critical heat flux are derived together with further approximations for the full temperature distribution inside the solid material without necessitating any numerical treatment. The explicit findings clearly point that a solid fuel bed layer at motion possesses less ignition time with a lower critical heat flux as compared to a solid material at rest, which may constitute a practical significance in applications involving fire, forest fuel and waste burning ignition, since combustion is initiated rapidly for moving flammable targets.

Suggested Citation

  • Turkyilmazoglu, Mustafa, 2020. "Combustion of a solid fuel material at motion," Energy, Elsevier, vol. 203(C).
  • Handle: RePEc:eee:energy:v:203:y:2020:i:c:s0360544220309440
    DOI: 10.1016/j.energy.2020.117837
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544220309440
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2020.117837?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Fu, Yangyang & Lu, Song & Shi, Long & Cheng, Xudong & Zhang, Heping, 2018. "Ignition and combustion characteristics of lithium ion batteries under low atmospheric pressure," Energy, Elsevier, vol. 161(C), pages 38-45.
    2. Meng, Xiaoxiao & Sun, Rui & Ismail, Tamer M. & El-Salam, M. Abd & Zhou, Wei & Zhang, Ruihan & Ren, Xiaohan, 2018. "Assessment of primary air on corn straw in a fixed bed combustion using Eulerian-Eulerian approach," Energy, Elsevier, vol. 151(C), pages 501-519.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Youkai Jiang & Yaheng Zhang & Jie Zhang & Zhiyong Tang, 2022. "Characteristics of Gas–Liquid Slug Flow in Honeycomb Microchannel Reactor," Energies, MDPI, vol. 15(4), pages 1-14, February.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zhang, Guangxu & Wei, Xuezhe & Tang, Xuan & Zhu, Jiangong & Chen, Siqi & Dai, Haifeng, 2021. "Internal short circuit mechanisms, experimental approaches and detection methods of lithium-ion batteries for electric vehicles: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 141(C).
    2. Meng, Xiaoxiao & Sun, Rui & Ismail, Tamer M. & Zhou, Wei & Ren, Xiaohan & Zhang, Ruihan, 2018. "Parametric studies on corn straw combustion characteristics in a fixed bed: Ash and moisture content," Energy, Elsevier, vol. 158(C), pages 192-203.
    3. Zhu, Xiaoqing & Wang, Zhenpo & Wang, Yituo & Wang, Hsin & Wang, Cong & Tong, Lei & Yi, Mi, 2019. "Overcharge investigation of large format lithium-ion pouch cells with Li(Ni0.6Co0.2Mn0.2)O2 cathode for electric vehicles: Thermal runaway features and safety management method," Energy, Elsevier, vol. 169(C), pages 868-880.
    4. Jia, Zhuangzhuang & Huang, Zonghou & Zhai, Hongju & Qin, Pen & Zhang, Yue & Li, Yawen & Wang, Qingsong, 2022. "Experimental investigation on thermal runaway propagation of 18,650 lithium-ion battery modules with two cathode materials at low pressure," Energy, Elsevier, vol. 251(C).
    5. Liu, Yanhui & Zhang, Lei & Ding, Yifei & Huang, Xianjia & Huang, Xinyan, 2024. "Effect of thermal impact on the onset and propagation of thermal runaway over cylindrical Li-ion batteries," Renewable Energy, Elsevier, vol. 222(C).
    6. Meng, Xiaoxiao & Zhou, Wei & Yan, Yonghong & Ren, Xiaohan & Ismail, Tamer M. & Sun, Rui, 2020. "Effects of preheating primary air and fuel size on the combustion characteristics of blended pinewood and corn straw in a fixed bed," Energy, Elsevier, vol. 210(C).
    7. Zhiguo Tang & Anqi Song & Shoucheng Wang & Jianping Cheng & Changfa Tao, 2020. "Numerical Analysis of Heat Transfer Mechanism of Thermal Runaway Propagation for Cylindrical Lithium-ion Cells in Battery Module," Energies, MDPI, vol. 13(4), pages 1-18, February.
    8. Jiao, Long & Kuang, Min & Chen, Yangyang & Liu, Sheng & Wang, Xiu, 2021. "Detailed measurements of in-furnace gas temperature and species concentration distribution regarding the primary-air distribution mode in a spreader and reversal chain-grate furnace," Energy, Elsevier, vol. 235(C).
    9. Xia, Zihong & Long, Jisheng & Yan, Shuai & Bai, Li & Du, Hailiang & Chen, Caixia, 2021. "Two-fluid simulation of moving grate waste incinerator: Comparison of 2D and 3D bed models," Energy, Elsevier, vol. 216(C).
    10. Zhang, Zhendong & Kong, Xiangdong & Zheng, Yuejiu & Zhou, Long & Lai, Xin, 2019. "Real-time diagnosis of micro-short circuit for Li-ion batteries utilizing low-pass filters," Energy, Elsevier, vol. 166(C), pages 1013-1024.
    11. Costa, Michela & Curcio, Christian & Piazzullo, Daniele & Rocco, Vittorio & Tuccillo, Raffaele, 2018. "RDF incineration modelling trough thermo-chemical conversion and gaseous combustion coupling," Energy, Elsevier, vol. 161(C), pages 974-987.
    12. Zhou, Anqi & Xu, Hongpeng & Xu, Mingchen & Yu, Wenbin & Li, Zhenwei & Yang, Wenming, 2020. "Numerical investigation of biomass co-combustion with methane for NOx reduction," Energy, Elsevier, vol. 194(C).
    13. Ningning Wei & Minghai Li, 2023. "Experimental Study of Thermal Runaway Process of 50 Ah Prismatic Nickel-Rich Battery," Energies, MDPI, vol. 16(16), pages 1-13, August.
    14. Huang, Peifeng & Yao, Caixia & Mao, Binbin & Wang, Qingsong & Sun, Jinhua & Bai, Zhonghao, 2020. "The critical characteristics and transition process of lithium-ion battery thermal runaway," Energy, Elsevier, vol. 213(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:203:y:2020:i:c:s0360544220309440. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.