IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v174y2019icp1188-1199.html
   My bibliography  Save this article

Investigation of the comprehensive performance of turbine stator cascades with heating endwall fences

Author

Listed:
  • Han, Xu
  • Zeng, Wei
  • Han, Zhonghe

Abstract

The study of wet steam two-phase flow is particularly important for the improvement of steam turbine efficiency and optimization of the design of a cascade channel. For White cascade, an endwall fence was designed and heated in the cascade. Eulerian-Eulerian model based on the finite volume method was imposed to analyze the aerodynamic performance, dehumidification performance, entropy production and enthalpy drop of the cascade for different positions and heating strengths of the endwall fence. The analysis indicated that the dehumidification performance can be improved by installing the endwall fence close to the cascade outlet but that doing so slightly deteriorates the aerodynamic performance. Moreover, higher heating intensity is costlier while providing a decreasing benefit; thus, it is necessary to select reasonable heating intensity. By comparison, an optimum design scheme is obtained that can improve the stage efficiency, operational safety and overall work capacity of the unit while reducing the energy loss. Moreover, compared with the original case, the average outlet wetness, total pressure loss and entropy production of the cascade can be lessened by 43.4%, 2.0% and 2.0%, respectively, while the enthalpy drop is raised by approximately 3.9%. These research results can serve as a reference for turbine passage design.

Suggested Citation

  • Han, Xu & Zeng, Wei & Han, Zhonghe, 2019. "Investigation of the comprehensive performance of turbine stator cascades with heating endwall fences," Energy, Elsevier, vol. 174(C), pages 1188-1199.
    • Handle: RePEc:eee:energy:v:174:y:2019:i:c:p:1188-1199
    DOI: 10.1016/j.energy.2019.03.038
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544219304426
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2019.03.038?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Zhonghe Han & Wei Zeng & Xu Han & Peng Xiang, 2018. "Investigating the Dehumidification Characteristics of Turbine Stator Cascades with Parallel Channels," Energies, MDPI, vol. 11(9), pages 1-17, September.
    2. Xu Han & Zhonghe Han & Wei Zeng & Jiangbo Qian & Zhi Wang, 2017. "Coupled Model of Heat and Mass Balance for Droplet Growth in Wet Steam Non-Equilibrium Homogeneous Condensation Flow," Energies, MDPI, vol. 10(12), pages 1-12, December.
    3. Ahmadpour, A. & Noori Rahim Abadi, S.M.A. & Meyer, J.P., 2017. "On the performance enhancement of thermo-compressor and steam turbine blade cascade in the presence of spontaneous nucleation," Energy, Elsevier, vol. 119(C), pages 675-693.
    4. Hanak, D.P. & Kolios, A.J. & Biliyok, C. & Manovic, V., 2015. "Probabilistic performance assessment of a coal-fired power plant," Applied Energy, Elsevier, vol. 139(C), pages 350-364.
    5. Mirhoseini, Mohadeseh Sadat & Boroomand, Masoud, 2017. "Multi-objective optimization of hot steam injection variables to control wetness parameters of steam flow within nozzles," Energy, Elsevier, vol. 141(C), pages 1027-1037.
    6. Vatanmakan, Masoud & Lakzian, Esmail & Mahpeykar, Mohammad Reza, 2018. "Investigating the entropy generation in condensing steam flow in turbine blades with volumetric heating," Energy, Elsevier, vol. 147(C), pages 701-714.
    7. Wróblewski, Włodzimierz & Dykas, Sławomir, 2016. "Two-fluid model with droplet size distribution for condensing steam flows," Energy, Elsevier, vol. 106(C), pages 112-120.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Wang, Zhiduo & Feng, Zhenping & Zhang, Xiaobo & Peng, Jingbo & Zhang, Fei & Wu, Xing, 2022. "Improving cooling performance and robustness of NGV endwall film cooling design using micro-scale ribs considering incidence effects," Energy, Elsevier, vol. 253(C).
    2. Qing Xu & Aqiang Lin & Yuhang Cai & Naseem Ahmad & Yu Duan & Chen Liu, 2020. "Numerical Analysis of Aerodynamic Characteristics of Exhaust Passage with Consideration of Wet Steam Effect in a Supercritical Steam Turbine," Energies, MDPI, vol. 13(7), pages 1-15, March.
    3. Zhang, Guojie & Dykas, Sławomir & Li, Pan & Li, Hang & Wang, Junlei, 2020. "Accurate condensing steam flow modeling in the ejector of the solar-driven refrigeration system," Energy, Elsevier, vol. 212(C).
    4. Han, Zhonghe & Xiang, Peng, 2020. "Modeling condensate throttling to improve the load change performance of cogeneration units," Energy, Elsevier, vol. 192(C).
    5. Momeni Dolatabadi, Amir & Moslehi, Jamshid & Saffari Pour, Mohsen & Mousavi Ajarostaghi, Seyed Soheil & Poncet, Sébastien & Arıcı, Müslüm, 2022. "Modified model of reduction condensing losses strategy into the wet steam flow considering efficient energy of steam turbine based on injection of nano-droplets," Energy, Elsevier, vol. 242(C).
    6. Bian, Jiang & Cao, Xuewen & Teng, Lin & Sun, Yuan & Gao, Song, 2019. "Effects of inlet parameters on the supersonic condensation and swirling characteristics of binary natural gas mixture," Energy, Elsevier, vol. 188(C).
    7. Xue, Zhanpu & Wang, Wei & Fang, Liqing & Zhou, Jingbo, 2020. "Numerical simulation on structural dynamics of 5 MW wind turbine," Renewable Energy, Elsevier, vol. 162(C), pages 222-233.
    8. Ansari, Mehran & Esfahanian, Vahid & Izadi, Mohammad Javad & Bashi, Hosein & Tavakoli, Alireza & Kordi, Mohammad, 2023. "Implementation of hot steam injection in steam turbine design: A novel mean-line method coupled with multi-objective optimization and neural network," Energy, Elsevier, vol. 283(C).
    9. Zhang, Guojie & Wang, Xiaogang & Jin, Zunlong & Dykas, Sławomir & Smołka, Krystian, 2023. "Numerical study of the loss and power prediction based on a modified non-equilibrium condensation model in a 200 MW industrial-scale steam turbine under different operation conditions," Energy, Elsevier, vol. 275(C).
    10. Aliabadi, Mohammad Ali Faghih & Lakzian, Esmail & Khazaei, Iman & Jahangiri, Ali, 2020. "A comprehensive investigation of finding the best location for hot steam injection into the wet steam turbine blade cascade," Energy, Elsevier, vol. 190(C).
    11. Guodong Yi & Huifang Zhou & Lemiao Qiu & Jundi Wu, 2020. "Geometry-Load Based Hybrid Correction Method for the Pre-Deformation Design of a Steam Turbine Blade," Energies, MDPI, vol. 13(10), pages 1-14, May.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Aliabadi, Mohammad Ali Faghih & Lakzian, Esmail & Khazaei, Iman & Jahangiri, Ali, 2020. "A comprehensive investigation of finding the best location for hot steam injection into the wet steam turbine blade cascade," Energy, Elsevier, vol. 190(C).
    2. Hoseinzade, Davood & Lakzian, Esmail & Hashemian, Ali, 2021. "A blackbox optimization of volumetric heating rate for reducing the wetness of the steam flow through turbine blades," Energy, Elsevier, vol. 220(C).
    3. Zhang, Guojie & Zhang, Xinzhe & Wang, Fangfang & Wang, Dingbiao & Jin, Zunlong & Zhou, Zhongning, 2019. "Design and optimization of novel dehumidification strategies based on modified nucleation model in three-dimensional cascade," Energy, Elsevier, vol. 187(C).
    4. Vatanmakan, Masoud & Lakzian, Esmail & Mahpeykar, Mohammad Reza, 2018. "Investigating the entropy generation in condensing steam flow in turbine blades with volumetric heating," Energy, Elsevier, vol. 147(C), pages 701-714.
    5. Momeni Dolatabadi, Amir & Moslehi, Jamshid & Saffari Pour, Mohsen & Mousavi Ajarostaghi, Seyed Soheil & Poncet, Sébastien & Arıcı, Müslüm, 2022. "Modified model of reduction condensing losses strategy into the wet steam flow considering efficient energy of steam turbine based on injection of nano-droplets," Energy, Elsevier, vol. 242(C).
    6. Ansari, Mehran & Esfahanian, Vahid & Izadi, Mohammad Javad & Bashi, Hosein & Tavakoli, Alireza & Kordi, Mohammad, 2023. "Implementation of hot steam injection in steam turbine design: A novel mean-line method coupled with multi-objective optimization and neural network," Energy, Elsevier, vol. 283(C).
    7. Bian, Jiang & Cao, Xuewen & Yang, Wen & Edem, Mawugbe Ayivi & Yin, Pengbo & Jiang, Wenming, 2018. "Supersonic liquefaction properties of natural gas in the Laval nozzle," Energy, Elsevier, vol. 159(C), pages 706-715.
    8. Zhonghe Han & Wei Zeng & Xu Han & Peng Xiang, 2018. "Investigating the Dehumidification Characteristics of Turbine Stator Cascades with Parallel Channels," Energies, MDPI, vol. 11(9), pages 1-17, September.
    9. Hosseini, Seyed Ali & Lakzian, Esmail & Zarei, Daryoush & Zare, Mehdi, 2024. "Design and optimization of slot number in supercooled vapor suction in steam turbine blades for reducing the wetness," Energy, Elsevier, vol. 301(C).
    10. Yang, Yan & Zhu, Xiaowei & Yan, Yuying & Ding, Hongbing & Wen, Chuang, 2019. "Performance of supersonic steam ejectors considering the nonequilibrium condensation phenomenon for efficient energy utilisation," Applied Energy, Elsevier, vol. 242(C), pages 157-167.
    11. Dolatabadi, Amir Momeni & Lakzian, Esmail & Heydari, Mahdi & Khan, Afrasyab, 2022. "A modified model of the suction technique of wetness reducing in wet steam flow considering power-saving," Energy, Elsevier, vol. 238(PA).
    12. Hanak, Dawid P. & Jenkins, Barrie G. & Kruger, Tim & Manovic, Vasilije, 2017. "High-efficiency negative-carbon emission power generation from integrated solid-oxide fuel cell and calciner," Applied Energy, Elsevier, vol. 205(C), pages 1189-1201.
    13. Yang, Bo & Wei, Yi-Ming & Hou, Yunbing & Li, Hui & Wang, Pengtao, 2019. "Life cycle environmental impact assessment of fuel mix-based biomass co-firing plants with CO2 capture and storage," Applied Energy, Elsevier, vol. 252(C), pages 1-1.
    14. Jie Wang & Hongfang Gu, 2021. "A Study of Moist Air Condensation Characteristics in a Transonic Flow System," Energies, MDPI, vol. 14(13), pages 1-12, July.
    15. Duan, Liqiang & Xia, Kun & Feng, Tao & Jia, Shilun & Bian, Jing, 2016. "Study on coal-fired power plant with CO2 capture by integrating molten carbonate fuel cell system," Energy, Elsevier, vol. 117(P2), pages 578-589.
    16. Hanak, Dawid P. & Kolios, Athanasios J. & Manovic, Vasilije, 2016. "Comparison of probabilistic performance of calcium looping and chemical solvent scrubbing retrofits for CO2 capture from coal-fired power plant," Applied Energy, Elsevier, vol. 172(C), pages 323-336.
    17. Paweł Ziółkowski & Łukasz Witanowski & Stanisław Głuch & Piotr Klonowicz & Michel Feidt & Aimad Koulali, 2024. "Example of Using Particle Swarm Optimization Algorithm with Nelder–Mead Method for Flow Improvement in Axial Last Stage of Gas–Steam Turbine," Energies, MDPI, vol. 17(12), pages 1-29, June.
    18. Xu Han & Zhonghe Han & Wei Zeng & Jiangbo Qian & Zhi Wang, 2017. "Coupled Model of Heat and Mass Balance for Droplet Growth in Wet Steam Non-Equilibrium Homogeneous Condensation Flow," Energies, MDPI, vol. 10(12), pages 1-12, December.
    19. Cao, Lihua & Li, Longge & Dong, Enfu & Si, Heyong & Ning, Zhe & Liu, Miao, 2019. "Influence of aerodynamic characteristics optimization of exhaust passage on heat transfer of condenser in steam turbine," Energy, Elsevier, vol. 188(C).
    20. Mirhoseini, Mohadeseh Sadat & Boroomand, Masoud, 2017. "Multi-objective optimization of hot steam injection variables to control wetness parameters of steam flow within nozzles," Energy, Elsevier, vol. 141(C), pages 1027-1037.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:174:y:2019:i:c:p:1188-1199. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.