IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v283y2023ics0360544223025185.html
   My bibliography  Save this article

Implementation of hot steam injection in steam turbine design: A novel mean-line method coupled with multi-objective optimization and neural network

Author

Listed:
  • Ansari, Mehran
  • Esfahanian, Vahid
  • Izadi, Mohammad Javad
  • Bashi, Hosein
  • Tavakoli, Alireza
  • Kordi, Mohammad

Abstract

Low-pressure turbines usually work in wet conditions which causes both lifetime and efficiency reduction. Hot steam injection (HSI) which has received great interest recently, is a suggested solution to reduce wetness. There is a research gap in implementing HSI in the mean-line procedure, which is a conventional method of designing and analyzing turbines. In this paper for the first time, an object-oriented in-house mean-line code is developed with the ability of HSI calculation for steam turbines. The validation of code is performed with the 3D simulation of a 2-stage axial steam turbine. In addition, considering that HSI may reduce efficiency of the turbine due to mixing entropy generation, a multi-objective genetic algorithm optimization and a neural network is used to redesign the steam turbine. Mass fraction and total temperature of injected flow from the trailing edge of blade rows are the decision variables and, liquid mass fraction and efficiency of turbine are the objective functions. The comparison of Pareto front points reveals that the maximum possible improvement of quality and power relative to baseline is 5% and 10%, respectively. Furthermore, if efficiency is the desired objective function, by enhancing 1% of steam quality, it can be increased by 0.1%.

Suggested Citation

  • Ansari, Mehran & Esfahanian, Vahid & Izadi, Mohammad Javad & Bashi, Hosein & Tavakoli, Alireza & Kordi, Mohammad, 2023. "Implementation of hot steam injection in steam turbine design: A novel mean-line method coupled with multi-objective optimization and neural network," Energy, Elsevier, vol. 283(C).
  • Handle: RePEc:eee:energy:v:283:y:2023:i:c:s0360544223025185
    DOI: 10.1016/j.energy.2023.129124
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544223025185
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2023.129124?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Hoseinzade, Davood & Lakzian, Esmail & Hashemian, Ali, 2021. "A blackbox optimization of volumetric heating rate for reducing the wetness of the steam flow through turbine blades," Energy, Elsevier, vol. 220(C).
    2. Dolatabadi, Amir Momeni & Lakzian, Esmail & Heydari, Mahdi & Khan, Afrasyab, 2022. "A modified model of the suction technique of wetness reducing in wet steam flow considering power-saving," Energy, Elsevier, vol. 238(PA).
    3. Momeni Dolatabadi, Amir & Moslehi, Jamshid & Saffari Pour, Mohsen & Mousavi Ajarostaghi, Seyed Soheil & Poncet, Sébastien & Arıcı, Müslüm, 2022. "Modified model of reduction condensing losses strategy into the wet steam flow considering efficient energy of steam turbine based on injection of nano-droplets," Energy, Elsevier, vol. 242(C).
    4. Mirhoseini, Mohadeseh Sadat & Boroomand, Masoud, 2017. "Multi-objective optimization of hot steam injection variables to control wetness parameters of steam flow within nozzles," Energy, Elsevier, vol. 141(C), pages 1027-1037.
    5. Han, Xu & Zeng, Wei & Han, Zhonghe, 2019. "Investigation of the comprehensive performance of turbine stator cascades with heating endwall fences," Energy, Elsevier, vol. 174(C), pages 1188-1199.
    6. Zhang, Guojie & Wang, Xiaogang & Wiśniewski, Piotr & Chen, Jiaheng & Qin, Xiang & Dykas, Sławomir, 2023. "Effect of NaCl presence caused by salting out on the heterogeneous-homogeneous coupling non-equilibrium condensation flow in a steam turbine cascade," Energy, Elsevier, vol. 263(PE).
    7. Vatanmakan, Masoud & Lakzian, Esmail & Mahpeykar, Mohammad Reza, 2018. "Investigating the entropy generation in condensing steam flow in turbine blades with volumetric heating," Energy, Elsevier, vol. 147(C), pages 701-714.
    8. Strušnik, Dušan & Brandl, Daniel & Schober, Helmut & Ferčec, Janko & Avsec, Jurij, 2020. "A simulation model of the application of the solar STAF panel heat transfer and noise reduction with and without a transparent plate: A renewable energy review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 134(C).
    9. Aliabadi, Mohammad Ali Faghih & Lakzian, Esmail & Khazaei, Iman & Jahangiri, Ali, 2020. "A comprehensive investigation of finding the best location for hot steam injection into the wet steam turbine blade cascade," Energy, Elsevier, vol. 190(C).
    10. Strušnik, Dušan & Avsec, Jurij, 2015. "Artificial neural networking and fuzzy logic exergy controlling model of combined heat and power system in thermal power plant," Energy, Elsevier, vol. 80(C), pages 318-330.
    11. Kiyarash Rahbar & Saad Mahmoud & Raya K. Al-Dadah, 2016. "Mean-line modeling and CFD analysis of a miniature radial turbine for distributed power generation systems," International Journal of Low-Carbon Technologies, Oxford University Press, vol. 11(2), pages 157-168.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Liu, Changxing & Zou, Zhengping & Xu, Pengcheng & Wang, Yifan, 2024. "Development of helium turbine loss model based on knowledge transfer with neural network and its application on aerodynamic design," Energy, Elsevier, vol. 297(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Momeni Dolatabadi, Amir & Moslehi, Jamshid & Saffari Pour, Mohsen & Mousavi Ajarostaghi, Seyed Soheil & Poncet, Sébastien & Arıcı, Müslüm, 2022. "Modified model of reduction condensing losses strategy into the wet steam flow considering efficient energy of steam turbine based on injection of nano-droplets," Energy, Elsevier, vol. 242(C).
    2. Dolatabadi, Amir Momeni & Lakzian, Esmail & Heydari, Mahdi & Khan, Afrasyab, 2022. "A modified model of the suction technique of wetness reducing in wet steam flow considering power-saving," Energy, Elsevier, vol. 238(PA).
    3. Hoseinzade, Davood & Lakzian, Esmail & Hashemian, Ali, 2021. "A blackbox optimization of volumetric heating rate for reducing the wetness of the steam flow through turbine blades," Energy, Elsevier, vol. 220(C).
    4. Aliabadi, Mohammad Ali Faghih & Lakzian, Esmail & Khazaei, Iman & Jahangiri, Ali, 2020. "A comprehensive investigation of finding the best location for hot steam injection into the wet steam turbine blade cascade," Energy, Elsevier, vol. 190(C).
    5. Zhang, Guojie & Wang, Xiaogang & Jin, Zunlong & Dykas, Sławomir & Smołka, Krystian, 2023. "Numerical study of the loss and power prediction based on a modified non-equilibrium condensation model in a 200 MW industrial-scale steam turbine under different operation conditions," Energy, Elsevier, vol. 275(C).
    6. Zhonghe Han & Wei Zeng & Xu Han & Peng Xiang, 2018. "Investigating the Dehumidification Characteristics of Turbine Stator Cascades with Parallel Channels," Energies, MDPI, vol. 11(9), pages 1-17, September.
    7. Zhang, Guojie & Zhang, Xinzhe & Wang, Fangfang & Wang, Dingbiao & Jin, Zunlong & Zhou, Zhongning, 2019. "Design and optimization of novel dehumidification strategies based on modified nucleation model in three-dimensional cascade," Energy, Elsevier, vol. 187(C).
    8. Hu, Pengfei & Zhao, Pu & Li, Qi & Hou, Tianbo & Wang, Shibo & Cao, Lihua & Wang, Yanhong, 2023. "Performance of non-equilibrium condensation flow in wet steam zone of steam turbine based on modified model," Energy, Elsevier, vol. 267(C).
    9. Han, Xu & Zeng, Wei & Han, Zhonghe, 2019. "Investigation of the comprehensive performance of turbine stator cascades with heating endwall fences," Energy, Elsevier, vol. 174(C), pages 1188-1199.
    10. Zhang, Guojie & Wang, Xiaogang & Wiśniewski, Piotr & Chen, Jiaheng & Qin, Xiang & Dykas, Sławomir, 2023. "Effect of NaCl presence caused by salting out on the heterogeneous-homogeneous coupling non-equilibrium condensation flow in a steam turbine cascade," Energy, Elsevier, vol. 263(PE).
    11. Wang, Zhiduo & Feng, Zhenping & Zhang, Xiaobo & Peng, Jingbo & Zhang, Fei & Wu, Xing, 2022. "Improving cooling performance and robustness of NGV endwall film cooling design using micro-scale ribs considering incidence effects," Energy, Elsevier, vol. 253(C).
    12. Besharati Fard, Moein & Moradian, Parisa & Emarati, Mohammadreza & Ebadi, Mehdi & Gholamzadeh Chofreh, Abdoulmohammad & Klemeŝ, Jiří Jaromír, 2022. "Ground-mounted photovoltaic power station site selection and economic analysis based on a hybrid fuzzy best-worst method and geographic information system: A case study Guilan province," Renewable and Sustainable Energy Reviews, Elsevier, vol. 169(C).
    13. Zhang, Guojie & Wang, Xiaogang & Chen, Jiaheng & Tang, Songzhen & Smołka, Krystian & Majkut, Mirosław & Jin, Zunlong & Dykas, Sławomir, 2023. "Supersonic nozzle performance prediction considering the homogeneous-heterogeneous coupling spontaneous non-equilibrium condensation," Energy, Elsevier, vol. 284(C).
    14. Hu, Pengfei & Liang, Qi & Fan, Tiantian & Wang, Yanhong & Li, Qi, 2024. "Investigation of heterogeneous condensation flow characteristics in the steam turbine based on homogeneous-heterogeneous condensation coupling model using OpenFOAM," Energy, Elsevier, vol. 296(C).
    15. Zhang, Guojie & Dykas, Sławomir & Li, Pan & Li, Hang & Wang, Junlei, 2020. "Accurate condensing steam flow modeling in the ejector of the solar-driven refrigeration system," Energy, Elsevier, vol. 212(C).
    16. Şöhret, Yasin & Dinç, Ali & Karakoç, T. Hikmet, 2015. "Exergy analysis of a turbofan engine for an unmanned aerial vehicle during a surveillance mission," Energy, Elsevier, vol. 93(P1), pages 716-729.
    17. Cao, Li-hua & Yu, Jing-wen & Li, Yong, 2016. "Study on the determination method of the normal value of relative internal efficiency of the last stage group of steam turbine," Energy, Elsevier, vol. 98(C), pages 101-107.
    18. Kaczmarczyk, Tomasz Z. & Żywica, Grzegorz & Ihnatowicz, Eugeniusz, 2017. "The impact of changes in the geometry of a radial microturbine stage on the efficiency of the micro CHP plant based on ORC," Energy, Elsevier, vol. 137(C), pages 530-543.
    19. Yang, Yan & Zhu, Xiaowei & Yan, Yuying & Ding, Hongbing & Wen, Chuang, 2019. "Performance of supersonic steam ejectors considering the nonequilibrium condensation phenomenon for efficient energy utilisation," Applied Energy, Elsevier, vol. 242(C), pages 157-167.
    20. Fretzen, Ulrich & Ansarin, Mohammad & Brandt, Tobias, 2021. "Temporal city-scale matching of solar photovoltaic generation and electric vehicle charging," Applied Energy, Elsevier, vol. 282(PA).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:283:y:2023:i:c:s0360544223025185. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.