IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v343y2023ics0306261923004208.html
   My bibliography  Save this article

Utilizing hydrogen pressure energy by expansion machines – PEM fuel cells in mobile and other potential applications

Author

Listed:
  • Singer, Gerald
  • Köll, Rebekka
  • Aichhorn, Lukas
  • Pertl, Patrick
  • Trattner, Alexander

Abstract

Hydrogen is an important energy carrier for a future without fossil fuels, but PEM fuel cell systems have to utilize the entire available energy as efficiently as possible. Hydrogen is typically stored at a maximum pressure of up to 700 bar and is supplied to the anode system at about 15 bar. Normally, a pressure reduction valve expands the hydrogen between 700 and 15 bar, but the pressure energy is unused during expansion. In this paper, different expansion machines are analyzed and the most attractive concepts are studied in detail to regain the expansion energy. Finally, a piston expansion system concept is designed with an estimated power output of 10 kW and a driving range increase of 2%, reflecting the high potential for efficiency improvement.

Suggested Citation

  • Singer, Gerald & Köll, Rebekka & Aichhorn, Lukas & Pertl, Patrick & Trattner, Alexander, 2023. "Utilizing hydrogen pressure energy by expansion machines – PEM fuel cells in mobile and other potential applications," Applied Energy, Elsevier, vol. 343(C).
    • Handle: RePEc:eee:appene:v:343:y:2023:i:c:s0306261923004208
    DOI: 10.1016/j.apenergy.2023.121056
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261923004208
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2023.121056?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Fuhaid Alshammari & Apostolos Karvountzis-Kontakiotis & Apostolos Pesyridis & Muhammad Usman, 2018. "Expander Technologies for Automotive Engine Organic Rankine Cycle Applications," Energies, MDPI, vol. 11(7), pages 1-36, July.
    2. Dumont, Olivier & Parthoens, Antoine & Dickes, Rémi & Lemort, Vincent, 2018. "Experimental investigation and optimal performance assessment of four volumetric expanders (scroll, screw, piston and roots) tested in a small-scale organic Rankine cycle system," Energy, Elsevier, vol. 165(PA), pages 1119-1127.
    3. Rusin, K. & Wróblewski, W. & Rulik, S., 2021. "Efficiency based optimization of a Tesla turbine," Energy, Elsevier, vol. 236(C).
    4. Oecd, 2022. "Enhancing online disclosure effectiveness," OECD Digital Economy Papers 335, OECD Publishing.
    5. Bouvier, Jean-Louis & Lemort, Vincent & Michaux, Ghislain & Salagnac, Patrick & Kientz, Thiebaut, 2016. "Experimental study of an oil-free steam piston expander for micro-combined heat and power systems," Applied Energy, Elsevier, vol. 169(C), pages 788-798.
    6. Wang, Yaodong & Chen, Lin & Jia, Boru & Roskilly, Anthony Paul, 2017. "Experimental study of the operation characteristics of an air-driven free-piston linear expander," Applied Energy, Elsevier, vol. 195(C), pages 93-99.
    7. Christian F. Hirche & Tammo H. A. Bijmolt & Maarten J. Gijsenberg, 2022. "When Offline Stores Reduce Online Returns," Sustainability, MDPI, vol. 14(13), pages 1-26, June.
    8. Gordon, Joel A. & Balta-Ozkan, Nazmiye & Nabavi, Seyed Ali, 2022. "Beyond the triangle of renewable energy acceptance: The five dimensions of domestic hydrogen acceptance," Applied Energy, Elsevier, vol. 324(C).
    9. Weckerle, C. & Nasir, M. & Hegner, R. & Bürger, I. & Linder, M., 2020. "A metal hydride air-conditioning system for fuel cell vehicles – Functional demonstration," Applied Energy, Elsevier, vol. 259(C).
    10. Bao, Junjiang & Zhao, Li, 2013. "A review of working fluid and expander selections for organic Rankine cycle," Renewable and Sustainable Energy Reviews, Elsevier, vol. 24(C), pages 325-342.
    11. Kölbig, M. & Weckerle, C. & Linder, M. & Bürger, I., 2022. "Review on thermal applications for metal hydrides in fuel cell vehicles: Operation modes, recent developments and crucial design aspects," Renewable and Sustainable Energy Reviews, Elsevier, vol. 162(C).
    12. Imran, Muhammad & Usman, Muhammad & Park, Byung-Sik & Lee, Dong-Hyun, 2016. "Volumetric expanders for low grade heat and waste heat recovery applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 57(C), pages 1090-1109.
    13. Hesel, Philipp & Braun, Sebastian & Zimmermann, Florian & Fichtner, Wolf, 2022. "Integrated modelling of European electricity and hydrogen markets," Applied Energy, Elsevier, vol. 328(C).
    14. Huili Zhang & Rui Du & Kelin Luo & Weitian Tong, 2022. "Learn from history for online bipartite matching," Journal of Combinatorial Optimization, Springer, vol. 44(5), pages 3611-3640, December.
    15. Carlo Cunanan & Manh-Kien Tran & Youngwoo Lee & Shinghei Kwok & Vincent Leung & Michael Fowler, 2021. "A Review of Heavy-Duty Vehicle Powertrain Technologies: Diesel Engine Vehicles, Battery Electric Vehicles, and Hydrogen Fuel Cell Electric Vehicles," Clean Technol., MDPI, vol. 3(2), pages 1-16, June.
    16. Kölbig, Mila & Bürger, Inga & Linder, Marc, 2021. "Thermal applications in vehicles using Hydralloy C5 in single and coupled metal hydride systems," Applied Energy, Elsevier, vol. 287(C).
    17. He, Wei & Wang, Jihong, 2018. "Optimal selection of air expansion machine in Compressed Air Energy Storage: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 87(C), pages 77-95.
    18. Mohd Ali Muhamad Don & Mohd Rilizam Rosli & Mohd Shukri Bin Mohd Senin & Mohd Farhan Ahmad & Noor Hanim Rahmat, 2022. "Exploring Connectedness in Online Learning," International Journal of Asian Social Science, Asian Economic and Social Society, vol. 12(4), pages 135-146.
    19. Ayachi, Fadhel & Ksayer, Elias Boulawz & Neveu, Pierre & Zoughaib, Assaad, 2016. "Experimental investigation and modeling of a hermetic scroll expander," Applied Energy, Elsevier, vol. 181(C), pages 256-267.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Wronski, Jorrit & Imran, Muhammad & Skovrup, Morten Juel & Haglind, Fredrik, 2019. "Experimental and numerical analysis of a reciprocating piston expander with variable valve timing for small-scale organic Rankine cycle power systems," Applied Energy, Elsevier, vol. 247(C), pages 403-416.
    2. Bianchi, M. & Branchini, L. & De Pascale, A. & Melino, F. & Ottaviano, S. & Peretto, A. & Torricelli, N., 2019. "Application and comparison of semi-empirical models for performance prediction of a kW-size reciprocating piston expander," Applied Energy, Elsevier, vol. 249(C), pages 143-156.
    3. Fabio Fatigati & Marco Di Bartolomeo & Davide Di Battista & Roberto Cipollone, 2020. "Experimental Validation of a New Modeling for the Design Optimization of a Sliding Vane Rotary Expander Operating in an ORC-Based Power Unit," Energies, MDPI, vol. 13(16), pages 1-23, August.
    4. Giuffrida, Antonio, 2017. "Improving the semi-empirical modelling of a single-screw expander for small organic Rankine cycles," Applied Energy, Elsevier, vol. 193(C), pages 356-368.
    5. Hou, Xiaochen & Zhang, Hongguang & Zhao, Tenglong & Xu, Yonghong & Tian, Yaming & Li, Jian & Zhang, Mengru & Wu, Yuting, 2019. "A comparison study and performance analysis of free piston expander-linear generator for organic Rankine cycle system," Energy, Elsevier, vol. 167(C), pages 136-143.
    6. Xu, Yonghong & Tong, Liang & Zhang, Hongguang & Hou, Xiaochen & Yang, Fubin & Yu, Fei & Yang, Yuxin & Liu, Rong & Tian, Yaming & Zhao, Tenglong, 2018. "Experimental and simulation study of a free piston expander–linear generator for small-scale organic Rankine cycle," Energy, Elsevier, vol. 161(C), pages 776-791.
    7. Naseri, Ali & Norris, Stuart & Subiantoro, Alison, 2020. "Experimental investigation of a prototype semi-dry revolving vane expander: Design challenges and performance criteria," Energy, Elsevier, vol. 205(C).
    8. Fuhaid Alshammari & Apostolos Karvountzis-Kontakiotis & Apostolos Pesyridis & Muhammad Usman, 2018. "Expander Technologies for Automotive Engine Organic Rankine Cycle Applications," Energies, MDPI, vol. 11(7), pages 1-36, July.
    9. Campana, Claudio & Cioccolanti, Luca & Renzi, Massimiliano & Caresana, Flavio, 2019. "Experimental analysis of a small-scale scroll expander for low-temperature waste heat recovery in Organic Rankine Cycle," Energy, Elsevier, vol. 187(C).
    10. Ping, Xu & Yang, Fubin & Zhang, Hongguang & Wang, Yan & Lei, Biao & Wu, Yuting, 2022. "Performance limits of the single screw expander in organic Rankine cycle with ensemble learning and hyperdimensional evolutionary many-objective optimization algorithm intervention," Energy, Elsevier, vol. 245(C).
    11. Hou, Xiaochen & Zhang, Hongguang & Yu, Fei & Liu, Hongda & Yang, Fubin & Xu, Yonghong & Tian, Yaming & Li, Gaosheng, 2017. "Free piston expander-linear generator used for organic Rankine cycle waste heat recovery system," Applied Energy, Elsevier, vol. 208(C), pages 1297-1307.
    12. M. de Oliveira Junior, Maury & T. Maia, Antônio A. & P. Porto, Matheus, 2020. "Organic Rankine Energy Storage (ORES) system," Energy, Elsevier, vol. 204(C).
    13. Liang, Ting & Vecchi, Andrea & Knobloch, Kai & Sciacovelli, Adriano & Engelbrecht, Kurt & Li, Yongliang & Ding, Yulong, 2022. "Key components for Carnot Battery: Technology review, technical barriers and selection criteria," Renewable and Sustainable Energy Reviews, Elsevier, vol. 163(C).
    14. Tian, Yafen & Xing, Ziwen & He, Zhilong & Wu, Huagen, 2017. "Modeling and performance analysis of twin-screw steam expander under fluctuating operating conditions in steam pipeline pressure energy recovery applications," Energy, Elsevier, vol. 141(C), pages 692-701.
    15. Li, Guoqiang & Lei, Biao & Wu, Yuting & Zhi, Ruiping & Zhao, Yingkun & Guo, Zhiyu & Liu, Guangyu & Ma, Chongfang, 2018. "Influence of inlet pressure and rotational speed on the performance of high pressure single screw expander prototype," Energy, Elsevier, vol. 147(C), pages 279-285.
    16. Braimakis, Konstantinos & Karellas, Sotirios, 2017. "Integrated thermoeconomic optimization of standard and regenerative ORC for different heat source types and capacities," Energy, Elsevier, vol. 121(C), pages 570-598.
    17. Guo, Zhiyu & Zhang, Cancan & Wu, Yuting & Lei, Biao & Yan, Dong & Zhi, Ruiping & Shen, Lili, 2020. "Numerical optimization of intake and exhaust structure and experimental verification on single-screw expander for small-scale ORC applications," Energy, Elsevier, vol. 199(C).
    18. Strube Martins, Sonia & Knips, Julian & Wernick, Christian, 2022. "eSIM: Potentiale, Anforderungen und Wettbewerbsprobleme," WIK Discussion Papers 490, WIK Wissenschaftliches Institut für Infrastruktur und Kommunikationsdienste GmbH.
    19. Guido Francesco Frate & Lorenzo Ferrari & Umberto Desideri, 2020. "Rankine Carnot Batteries with the Integration of Thermal Energy Sources: A Review," Energies, MDPI, vol. 13(18), pages 1-28, September.
    20. Xu, Weicong & Deng, Shuai & Su, Wen & Zhang, Ying & Zhao, Li & Yu, Zhixin, 2018. "How to approach Carnot cycle via zeotropic working fluid: Research methodology and case study," Energy, Elsevier, vol. 144(C), pages 576-586.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:343:y:2023:i:c:s0306261923004208. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.