IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v312y2022ics0306261922002550.html
   My bibliography  Save this article

Utilization of carbon-based energy as raw material instead of fuel with low CO2 emissions: Energy analyses and process integration of chemical looping ammonia generation

Author

Listed:
  • Fang, Jing
  • Xiong, Chuhao
  • Feng, Mingqian
  • Wu, Ye
  • Liu, Dong

Abstract

Ammonia (NH3) has attracted much attention as both a fuel and an energy carrier due to its transportability and cleanliness. At present, most of NH3 is synthesized by the catalytic Haber-Bosch reaction (N2+3H2⇌2NH3). Due to its energy-intensive processes for hydrogen production, high carbon dioxide (CO2) emissions as well as high pressure required for NH3 synthesis, an alternative highly efficient system is needed. In this study, an integrated system based on chemical looping ammonia generation (CLAG), which combines air separation, N-sorption/desorption (ammonia synthesis), steam generation and urea production is proposed. The system employs a novel ammonia production loop and produces steam, carbon monoxide (CO) and urea as by-products. System modelling is conducted using Aspen Plus V11 (Aspen Technology, Inc.). The results showed the energy consumption can reach 6.88 GJ/tNH3. The total CO2 emission of the ammonia synthesis system was 2.05 kg/kg NH3 in which direct CO2 emission dropped to 0.43 kg/kg NH3, and with urea production, the direct CO2 emission can reduce to −0.86 kg/kg NH3, leading to negative CO2 emissions.

Suggested Citation

  • Fang, Jing & Xiong, Chuhao & Feng, Mingqian & Wu, Ye & Liu, Dong, 2022. "Utilization of carbon-based energy as raw material instead of fuel with low CO2 emissions: Energy analyses and process integration of chemical looping ammonia generation," Applied Energy, Elsevier, vol. 312(C).
  • Handle: RePEc:eee:appene:v:312:y:2022:i:c:s0306261922002550
    DOI: 10.1016/j.apenergy.2022.118809
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261922002550
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.apenergy.2022.118809?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Zhang, Hanfei & Wang, Ligang & Van herle, Jan & Maréchal, François & Desideri, Umberto, 2021. "Techno-economic comparison of 100% renewable urea production processes," Applied Energy, Elsevier, vol. 284(C).
    2. Penkuhn, Mathias & Tsatsaronis, George, 2017. "Comparison of different ammonia synthesis loop configurations with the aid of advanced exergy analysis," Energy, Elsevier, vol. 137(C), pages 854-864.
    3. Tian-Nan Ye & Sang-Won Park & Yangfan Lu & Jiang Li & Masato Sasase & Masaaki Kitano & Tomofumi Tada & Hideo Hosono, 2020. "Vacancy-enabled N2 activation for ammonia synthesis on an Ni-loaded catalyst," Nature, Nature, vol. 583(7816), pages 391-395, July.
    4. Rafiqul, Islam & Weber, Christoph & Lehmann, Bianca & Voss, Alfred, 2005. "Energy efficiency improvements in ammonia production—perspectives and uncertainties," Energy, Elsevier, vol. 30(13), pages 2487-2504.
    5. Bargiacchi, Eleonora & Antonelli, Marco & Desideri, Umberto, 2019. "A comparative assessment of Power-to-Fuel production pathways," Energy, Elsevier, vol. 183(C), pages 1253-1265.
    6. Jiang, Jianrong & Feng, Xiao, 2019. "Energy optimization of ammonia synthesis processes based on oxygen purity under different purification technologies," Energy, Elsevier, vol. 185(C), pages 819-828.
    7. Lee Pereira, Reinaldo Juan & Argyris, Panagiotis Alexandros & Spallina, Vincenzo, 2020. "A comparative study on clean ammonia production using chemical looping based technology," Applied Energy, Elsevier, vol. 280(C).
    8. Wang, Xiaoyu & Su, Mingze & Zhao, Haibo, 2021. "Process design and exergy cost analysis of a chemical looping ammonia generation system using AlN/Al2O3 as a nitrogen carrier," Energy, Elsevier, vol. 230(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Xiong, Chuhao & Wu, Jin & Ji, Zhengang & Wu, Ye & Liu, Dong, 2024. "Unraveling the role of alkali metal in the biochar for enhancing the chemical looping ammonia generation efficiency," Renewable Energy, Elsevier, vol. 220(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Meng, Wenliang & Wang, Dongliang & Zhou, Huairong & Yang, Yong & Li, Hongwei & Liao, Zuwei & Yang, Siyu & Hong, Xiaodong & Li, Guixian, 2023. "Carbon dioxide from oxy-fuel coal-fired power plant integrated green ammonia for urea synthesis: Process modeling, system analysis, and techno-economic evaluation," Energy, Elsevier, vol. 278(C).
    2. Xiong, Chuhao & Wu, Ye & Feng, Mingqian & Fang, Jing & Liu, Dong & Shen, Laihong & Argyle, Morris D. & A. M. Gasem, Khaled & Fan, Maohong, 2022. "High thermal stability Si-Al based N-carrier for efficient and stable chemical looping ammonia generation," Applied Energy, Elsevier, vol. 323(C).
    3. Liu, Chenglin & Zhao, Lei & Zhu, Shun & Shen, Yuefeng & Yu, Jianhua & Yang, Qingchun, 2023. "Advanced exergy analysis and optimization of a coal to ethylene glycol (CtEG) process," Energy, Elsevier, vol. 282(C).
    4. Jiang, Jianrong & Feng, Xiao, 2019. "Energy optimization of ammonia synthesis processes based on oxygen purity under different purification technologies," Energy, Elsevier, vol. 185(C), pages 819-828.
    5. Michalsky, Ronald & Parman, Bryon J. & Amanor-Boadu, Vincent & Pfromm, Peter H., 2012. "Solar thermochemical production of ammonia from water, air and sunlight: Thermodynamic and economic analyses," Energy, Elsevier, vol. 42(1), pages 251-260.
    6. Muhammad Aziz & Agung Tri Wijayanta & Asep Bayu Dani Nandiyanto, 2020. "Ammonia as Effective Hydrogen Storage: A Review on Production, Storage and Utilization," Energies, MDPI, vol. 13(12), pages 1-25, June.
    7. Guido Francesco Frate & Lorenzo Ferrari & Umberto Desideri, 2020. "Rankine Carnot Batteries with the Integration of Thermal Energy Sources: A Review," Energies, MDPI, vol. 13(18), pages 1-28, September.
    8. Egerer, Jonas & Farhang-Damghani, Nima & Grimm, Veronika & Runge, Philipp, 2024. "The industry transformation from fossil fuels to hydrogen will reorganize value chains: Big picture and case studies for Germany," Applied Energy, Elsevier, vol. 358(C).
    9. Caglayan, Hasan & Caliskan, Hakan, 2022. "Assessment of a cogeneration system for ceramic industry by using various exergy based economic approaches," Renewable and Sustainable Energy Reviews, Elsevier, vol. 167(C).
    10. Flórez-Orrego, Daniel & de Oliveira Junior, Silvio, 2016. "On the efficiency, exergy costs and CO2 emission cost allocation for an integrated syngas and ammonia production plant," Energy, Elsevier, vol. 117(P2), pages 341-360.
    11. Zhou, Wenji & Zhu, Bing & Li, Qiang & Ma, Tieju & Hu, Shanying & Griffy-Brown, Charla, 2010. "CO2 emissions and mitigation potential in China's ammonia industry," Energy Policy, Elsevier, vol. 38(7), pages 3701-3709, July.
    12. Grubert, E. & Zacarias, M., 2022. "Paradigm shifts for environmental assessment of decarbonizing energy systems: Emerging dominance of embodied impacts and design-oriented decision support needs," Renewable and Sustainable Energy Reviews, Elsevier, vol. 159(C).
    13. Wang, Xiaoyu & Su, Mingze & Zhao, Haibo, 2021. "Process design and exergy cost analysis of a chemical looping ammonia generation system using AlN/Al2O3 as a nitrogen carrier," Energy, Elsevier, vol. 230(C).
    14. Brandenburg, Marcus, 2017. "A hybrid approach to configure eco-efficient supply chains under consideration of performance and risk aspects," Omega, Elsevier, vol. 70(C), pages 58-76.
    15. Alizadeh, Reza & Lund, Peter D. & Soltanisehat, Leili, 2020. "Outlook on biofuels in future studies: A systematic literature review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 134(C).
    16. Liu, Xiaoyu & Chen, Dingjiang & Zhang, Wenjun & Qin, Weizhong & Zhou, Wenji & Qiu, Tong & Zhu, Bing, 2013. "An assessment of the energy-saving potential in China's petroleum refining industry from a technical perspective," Energy, Elsevier, vol. 59(C), pages 38-49.
    17. Huize Wang & Ranga Rohit Seemakurthi & Gao-Feng Chen & Volker Strauss & Oleksandr Savateev & Guangtong Hai & Liangxin Ding & Núria López & Haihui Wang & Markus Antonietti, 2023. "Laser-induced nitrogen fixation," Nature Communications, Nature, vol. 14(1), pages 1-7, December.
    18. Ang Cao & Vanessa J. Bukas & Vahid Shadravan & Zhenbin Wang & Hao Li & Jakob Kibsgaard & Ib Chorkendorff & Jens K. Nørskov, 2022. "A spin promotion effect in catalytic ammonia synthesis," Nature Communications, Nature, vol. 13(1), pages 1-7, December.
    19. Flórez-Orrego, Daniel & de Oliveira Junior, Silvio, 2017. "Modeling and optimization of an industrial ammonia synthesis unit: An exergy approach," Energy, Elsevier, vol. 137(C), pages 234-250.
    20. Srivastava, Nitish & Saquib, Mohammad & Rajput, Pramod & Bhosale, Amit C. & Singh, Rhythm & Arora, Pratham, 2023. "Prospects of solar-powered nitrogenous fertilizers," Renewable and Sustainable Energy Reviews, Elsevier, vol. 187(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:312:y:2022:i:c:s0306261922002550. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.