IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v228y2018icp1767-1776.html
   My bibliography  Save this article

Sustainable yarn type-piezoelectric energy harvester as an eco-friendly, cost-effective battery-free breath sensor

Author

Listed:
  • Maria Joseph Raj, Nirmal Prashanth
  • Alluri, Nagamalleswara Rao
  • Vivekananthan, Venkateswaran
  • Chandrasekhar, Arunkumar
  • Khandelwal, Gaurav
  • Kim, Sang-Jae

Abstract

A cost-effective layer-by-layer brush-coating technique was developed to fabricate a flexible yarn-based piezoelectric nanogenerator (FY-PNG) to harness abundant waste mechanical energy. A simple sol-gel method was used to synthesize the orthorhombic crystalline phase of bismuth titanate perovskite, i.e., Bi4Ti3O12 (BiTO). A single FY-PNG device generated a maximum peak-to-peak open-circuit voltage (VOC(P–P)), short-circuit current (ISC(P–P)), and instantaneous area power density of 60 V, 400 nA, and 18.5 mW/m2, respectively, upon application of a 1 N periodic mechanical load. The switching polarity of the FY-PNG demonstrated good phase shifting between the output signals and confirmed that the output derived from the device and not from any external sources. The working mechanism, electrical poling effect, force analysis, repeatability, stability, charging, energy storage analysis, and sensitivity to biomechanical force of the FY-PNG was thoroughly investigated. The FY-PNG device output was used to power five commercial green light-emitting diodes (LEDs) and a display system. Additionally, a non-invasive self-powered breathing sensor (SPBS) was developed to monitor human inhalation/exhalation. The repeatability and reproducibility of SPBS evaluated using different devices and test subjects demonstrated a good variation in output (i.e., 0.2–0.4 V) for inhalation/exhalation; the SPBS was also evaluated under slow/fast and constant breathing conditions. The proposed brush-coating technique for FY-PNGs is an efficient, cost-effective, eco-friendly, and easily scalable technique that can pave the way to the design of novel-shaped PNG devices for applications such as implantable self-powered biosensors and automotive electronic systems.

Suggested Citation

  • Maria Joseph Raj, Nirmal Prashanth & Alluri, Nagamalleswara Rao & Vivekananthan, Venkateswaran & Chandrasekhar, Arunkumar & Khandelwal, Gaurav & Kim, Sang-Jae, 2018. "Sustainable yarn type-piezoelectric energy harvester as an eco-friendly, cost-effective battery-free breath sensor," Applied Energy, Elsevier, vol. 228(C), pages 1767-1776.
    • Handle: RePEc:eee:appene:v:228:y:2018:i:c:p:1767-1776
    DOI: 10.1016/j.apenergy.2018.07.016
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261918310432
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2018.07.016?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Ju, Suna & Ji, Chang-Hyeon, 2018. "Impact-based piezoelectric vibration energy harvester," Applied Energy, Elsevier, vol. 214(C), pages 139-151.
    2. Sultana, Ayesha & Alam, Md. Mehebub & Middya, Tapas Ranjan & Mandal, Dipankar, 2018. "A pyroelectric generator as a self-powered temperature sensor for sustainable thermal energy harvesting from waste heat and human body heat," Applied Energy, Elsevier, vol. 221(C), pages 299-307.
    3. Alluri, Nagamalleswara Rao & Selvarajan, Sophia & Chandrasekhar, Arunkumar & Saravanakumar, Balasubramaniam & Lee, Gae Myoung & Jeong, Ji Hyun & Kim, Sang-Jae, 2017. "Worm structure piezoelectric energy harvester using ionotropic gelation of barium titanate-calcium alginate composite," Energy, Elsevier, vol. 118(C), pages 1146-1155.
    4. Khandelwal, Gaurav & Chandrasekhar, Arunkumar & Alluri, Nagamalleswara Rao & Vivekananthan, Venkateswaran & Maria Joseph Raj, Nirmal Prashanth & Kim, Sang-Jae, 2018. "Trash to energy: A facile, robust and cheap approach for mitigating environment pollutant using household triboelectric nanogenerator," Applied Energy, Elsevier, vol. 219(C), pages 338-349.
    5. Johar, Muhammad Ali & Kang, Jin-Ho & Hassan, Mostafa Afifi & Ryu, Sang-Wan, 2018. "A scalable, flexible and transparent GaN based heterojunction piezoelectric nanogenerator for bending, air-flow and vibration energy harvesting," Applied Energy, Elsevier, vol. 222(C), pages 781-789.
    6. Trinh, V.L. & Chung, C.K., 2018. "Harvesting mechanical energy, storage, and lighting using a novel PDMS based triboelectric generator with inclined wall arrays and micro-topping structure," Applied Energy, Elsevier, vol. 213(C), pages 353-365.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Kim, Jae Woo & Salauddin, Md & Cho, Hyunok & Rasel, M. Salauddin & Park, Jae Yeong, 2019. "Electromagnetic energy harvester based on a finger trigger rotational gear module and an array of disc Halbach magnets," Applied Energy, Elsevier, vol. 250(C), pages 776-785.
    2. Li, Zhongjie & Jiang, Xiaomeng & Yin, Peilun & Tang, Lihua & Wu, Hao & Peng, Yan & Luo, Jun & Xie, Shaorong & Pu, Huayan & Wang, Daifeng, 2021. "Towards self-powered technique in underwater robots via a high-efficiency electromagnetic transducer with circularly abrupt magnetic flux density change," Applied Energy, Elsevier, vol. 302(C).
    3. Han, Jae Yeon & Singh, Huidrom Hemojit & Won, Sukyoung & Kong, Dae Sol & Hu, Ying Chieh & Ko, Young Joon & Lee, Kyu-Tae & Wie, Jeong Jae & Jung, Jong Hoon, 2022. "Highly durable direct-current power generation in polarity-controlled and soft-triggered rotational triboelectric nanogenerator," Applied Energy, Elsevier, vol. 314(C).
    4. Toyabur Rahman, M. & Sohel Rana, SM & Salauddin, Md. & Maharjan, Pukar & Bhatta, Trilochan & Kim, Hyunsik & Cho, Hyunok & Park, Jae Yeong, 2020. "A highly miniaturized freestanding kinetic-impact-based non-resonant hybridized electromagnetic-triboelectric nanogenerator for human induced vibrations harvesting," Applied Energy, Elsevier, vol. 279(C).
    5. Kınas, Zeynep & Karabiber, Abdulkerim & Yar, Adem & Ozen, Abdurrahman & Ozel, Faruk & Ersöz, Mustafa & Okbaz, Abdulkerim, 2022. "High-performance triboelectric nanogenerator based on carbon nanomaterials functionalized polyacrylonitrile nanofibers," Energy, Elsevier, vol. 239(PD).
    6. Li, Zhongjie & Yang, Zhengbao & Naguib, Hani E., 2020. "Introducing revolute joints into piezoelectric energy harvesters," Energy, Elsevier, vol. 192(C).
    7. Zhai, Cong & Chou, Xiujian & He, Jian & Song, Linlin & Zhang, Zengxing & Wen, Tao & Tian, Zhumei & Chen, Xi & Zhang, Wendong & Niu, Zhichuan & Xue, Chenyang, 2018. "An electrostatic discharge based needle-to-needle booster for dramatic performance enhancement of triboelectric nanogenerators," Applied Energy, Elsevier, vol. 231(C), pages 1346-1353.
    8. Wang, Ying & Wu, Yesheng & Liu, Qi & Wang, Xiaodong & Cao, Jie & Cheng, Guanggui & Zhang, Zhongqiang & Ding, Jianning & Li, Kai, 2020. "Origami triboelectric nanogenerator with double-helical structure for environmental energy harvesting," Energy, Elsevier, vol. 212(C).
    9. Dudem, Bhaskar & Kim, Dong Hyun & Bharat, L. Krishna & Yu, Jae Su, 2018. "Highly-flexible piezoelectric nanogenerators with silver nanowires and barium titanate embedded composite films for mechanical energy harvesting," Applied Energy, Elsevier, vol. 230(C), pages 865-874.
    10. Khazaee, Majid & Huber, John E. & Rosendahl, Lasse & Rezania, Alireza, 2021. "The investigation of viscous and structural damping for piezoelectric energy harvesters using only time-domain voltage measurements," Applied Energy, Elsevier, vol. 285(C).
    11. Zhao, Dong & Liu, Ying, 2020. "A prototype for light-electric harvester based on light sensitive liquid crystal elastomer cantilever," Energy, Elsevier, vol. 198(C).
    12. Latif, Usman & Dowell, Earl H. & Uddin, E. & Younis, M.Y. & Frisch, H.M., 2024. "Comparative analysis of flag based energy harvester undergoing extraneous induced excitation," Energy, Elsevier, vol. 295(C).
    13. Ghomian, Taher & Kizilkaya, Orhan & Choi, Jin-Woo, 2018. "Lead sulfide colloidal quantum dot photovoltaic cell for energy harvesting from human body thermal radiation," Applied Energy, Elsevier, vol. 230(C), pages 761-768.
    14. Tan, Ting & Yan, Zhimiao & Zou, Hongxiang & Ma, Kejing & Liu, Fengrui & Zhao, Linchuan & Peng, Zhike & Zhang, Wenming, 2019. "Renewable energy harvesting and absorbing via multi-scale metamaterial systems for Internet of things," Applied Energy, Elsevier, vol. 254(C).
    15. Sultana, Ayesha & Alam, Md. Mehebub & Ghosh, Sujoy Kumar & Middya, Tapas Ranjan & Mandal, Dipankar, 2019. "Energy harvesting and self-powered microphone application on multifunctional inorganic-organic hybrid nanogenerator," Energy, Elsevier, vol. 166(C), pages 963-971.
    16. Marco Antonio Islas-Herrera & David Sánchez-Luna & Jorge Miguel Jaimes-Ponce & Daniel Andrés Córdova-Córdova & Christopher Iván Lorenzo-Alfaro & Daniel Hernández-Rivera, 2024. "Energy Harvester Based on Mechanical Impacts of an Oscillating Rod on Piezoelectric Transducers," Clean Technol., MDPI, vol. 6(3), pages 1-14, July.
    17. Zhang, Tingsheng & Wu, Xiaoping & Pan, Yajia & Luo, Dabing & Xu, Yongsheng & Zhang, Zutao & Yuan, Yanping & Yan, Jinyue, 2022. "Vibration energy harvesting system based on track energy-recycling technology for heavy-duty freight railroads," Applied Energy, Elsevier, vol. 323(C).
    18. Deepak, K. & Varma, V.B. & Prasanna, G. & Ramanujan, R.V., 2019. "Hybrid thermomagnetic oscillator for cooling and direct waste heat conversion to electricity," Applied Energy, Elsevier, vol. 233, pages 312-320.
    19. Bartosz Kawa & Krzysztof Śliwa & Vincent Ch. Lee & Qiongfeng Shi & Rafał Walczak, 2020. "Inkjet 3D Printed MEMS Vibrational Electromagnetic Energy Harvester," Energies, MDPI, vol. 13(11), pages 1-10, June.
    20. Wang, Shuyun & Yang, Zemeng & Kan, Junwu & Chen, Song & Chai, Chaohui & Zhang, Zhonghua, 2021. "Design and characterization of an amplitude-limiting rotational piezoelectric energy harvester excited by a radially dragged magnetic force," Renewable Energy, Elsevier, vol. 177(C), pages 1382-1393.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:228:y:2018:i:c:p:1767-1776. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.