IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v205y2017icp802-812.html
   My bibliography  Save this article

Improvement of tar removal performance of oil scrubber by producing syngas microbubbles

Author

Listed:
  • Unyaphan, Siriwat
  • Tarnpradab, Thanyawan
  • Takahashi, Fumitake
  • Yoshikawa, Kunio

Abstract

This paper investigated the feasibility of a low-cost and highly effective tar removal technique using venturi oil scrubber enhancing the absorption surface area by producing microbubbles for tar removal in biomass pyrolysis/gasification processes. The basic experiment was carried out by utilizing a laboratory-scale fixed bed pyrolyzer, and then the achievements were implemented in a commercial-scale bubbling fluidized bed gasifier. In the laboratory-scale experiment, the absorption surface area was evaluated based on the mean diameter and the yield of microbubbles. The venturi tubes with various throat diameter ratios (0.17, 0.42 and 0.67) and inverter frequencies (40, 50 and 60Hz) were tested to show that the throat diameter ratio of 0.42 and the inverter frequency of 60Hz were the optimum conditions. Furthermore, it was found that up to 97.7% of gravimetric tar was removed by the venturi scrubber, while naphthalene and phenol were completely removed, which markedly improved the performance comparing with other conventional scrubbers. The 20-h operation of the commercial-scale gasifier also showed that the gravimetric tar removal efficiency of the venturi scrubber was 87.1% on average and there were no naphthalene and phenol observed at the exit of the venturi scrubber as well. Totally, 99.2% of gravimetric tar was removed by using only physical methods comprised of the following: a series of cyclone, ceramic filter, air cooler, water coolers, venturi scrubber and packed bed adsorber, which achieved the syngas quality requirement for internal combustion engines.

Suggested Citation

  • Unyaphan, Siriwat & Tarnpradab, Thanyawan & Takahashi, Fumitake & Yoshikawa, Kunio, 2017. "Improvement of tar removal performance of oil scrubber by producing syngas microbubbles," Applied Energy, Elsevier, vol. 205(C), pages 802-812.
    • Handle: RePEc:eee:appene:v:205:y:2017:i:c:p:802-812
    DOI: 10.1016/j.apenergy.2017.08.071
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261917310887
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2017.08.071?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Wiinikka, Henrik & Wennebro, Jonas & Gullberg, Marcus & Pettersson, Esbjörn & Weiland, Fredrik, 2017. "Pure oxygen fixed-bed gasification of wood under high temperature (>1000°C) freeboard conditions," Applied Energy, Elsevier, vol. 191(C), pages 153-162.
    2. Shen, Yafei & Yoshikawa, Kunio, 2013. "Recent progresses in catalytic tar elimination during biomass gasification or pyrolysis—A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 21(C), pages 371-392.
    3. Paethanom, A. & Bartocci, P. & D’ Alessandro, B. & D’ Amico, M. & Testarmata, F. & Moriconi, N. & Slopiecka, K. & Yoshikawa, K. & Fantozzi, F., 2013. "A low-cost pyrogas cleaning system for power generation: Scaling up from lab to pilot," Applied Energy, Elsevier, vol. 111(C), pages 1080-1088.
    4. Zeng, Xi & Wang, Fang & Li, Hongling & Wang, Yin & Dong, Li & Yu, Jian & Xu, Guangwen, 2014. "Pilot verification of a low-tar two-stage coal gasification process with a fluidized bed pyrolyzer and fixed bed gasifier," Applied Energy, Elsevier, vol. 115(C), pages 9-16.
    5. Bhave, A.G. & Vyas, D.K. & Patel, J.B., 2008. "A wet packed bed scrubber-based producer gas cooling–cleaning system," Renewable Energy, Elsevier, vol. 33(7), pages 1716-1720.
    6. Chen, Hongfang & Namioka, Tomoaki & Yoshikawa, Kunio, 2011. "Characteristics of tar, NOx precursors and their absorption performance with different scrubbing solvents during the pyrolysis of sewage sludge," Applied Energy, Elsevier, vol. 88(12), pages 5032-5041.
    7. Tsuboi, Yosuke & Ito, Shintaro & Takafuji, Makoto & Ohara, Hiroaki & Fujimori, Toshiro, 2017. "Development of a regenerative reformer for tar-free syngas production in a steam gasification process," Applied Energy, Elsevier, vol. 185(P2), pages 1217-1224.
    8. Phuphuakrat, Thana & Namioka, Tomoaki & Yoshikawa, Kunio, 2010. "Tar removal from biomass pyrolysis gas in two-step function of decomposition and adsorption," Applied Energy, Elsevier, vol. 87(7), pages 2203-2211, July.
    9. Shen, Yafei & Zhao, Peitao & Shao, Qinfu & Takahashi, Fumitake & Yoshikawa, Kunio, 2015. "In situ catalytic conversion of tar using rice husk char/ash supported nickel–iron catalysts for biomass pyrolytic gasification combined with the mixing-simulation in fluidized-bed gasifier," Applied Energy, Elsevier, vol. 160(C), pages 808-819.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Rakesh N, & Dasappa, S., 2018. "A critical assessment of tar generated during biomass gasification - Formation, evaluation, issues and mitigation strategies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 91(C), pages 1045-1064.
    2. Setyawan, M. Ismail Bagus & Dafiqurrohman, Hafif & Akbar, Maha Hidayatullah & Surjosatyo, Adi, 2021. "Characterizing a two-stage downdraft biomass gasifier using a representative particle model," Renewable Energy, Elsevier, vol. 173(C), pages 750-767.
    3. Thapa, Sunil & Indrawan, Natarianto & Bhoi, Prakashbhai R. & Kumar, Ajay & Huhnke, Raymond L., 2019. "Tar reduction in biomass syngas using heat exchanger and vegetable oil bubbler," Energy, Elsevier, vol. 175(C), pages 402-409.
    4. Li, Jian & Tao, Junyu & Yan, Beibei & Jiao, Liguo & Chen, Guanyi & Hu, Jianli, 2021. "Review of microwave-based treatments of biomass gasification tar," Renewable and Sustainable Energy Reviews, Elsevier, vol. 150(C).
    5. Zeng, Xi & Wang, Fang & Han, Zhennan & Han, Jiangze & Zhang, Jianling & Wu, Rongcheng & Xu, Guangwen, 2019. "Assessment of char property on tar catalytic reforming in a fluidized bed reactor for adopting a two-stage gasification process," Applied Energy, Elsevier, vol. 248(C), pages 115-125.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Shen, Yafei & Wang, Junfeng & Ge, Xinlei & Chen, Mindong, 2016. "By-products recycling for syngas cleanup in biomass pyrolysis – An overview," Renewable and Sustainable Energy Reviews, Elsevier, vol. 59(C), pages 1246-1268.
    2. Hervy, Maxime & Weiss-Hortala, Elsa & Pham Minh, Doan & Dib, Hadi & Villot, Audrey & Gérente, Claire & Berhanu, Sarah & Chesnaud, Anthony & Thorel, Alain & Le Coq, Laurence & Nzihou, Ange, 2019. "Reactivity and deactivation mechanisms of pyrolysis chars from bio-waste during catalytic cracking of tar," Applied Energy, Elsevier, vol. 237(C), pages 487-499.
    3. Hu, Fu-Xiang & Yang, Guo-Hua & Ding, Guo-Zhu & Li, Zhen & Du, Ka-Shuai & Hu, Zhi-Fa & Tian, Su-Rui, 2016. "Experimental study on catalytic cracking of model tar compounds in a dual layer granular bed filter," Applied Energy, Elsevier, vol. 170(C), pages 47-57.
    4. Elsner, Witold & Wysocki, Marian & Niegodajew, Paweł & Borecki, Roman, 2017. "Experimental and economic study of small-scale CHP installation equipped with downdraft gasifier and internal combustion engine," Applied Energy, Elsevier, vol. 202(C), pages 213-227.
    5. Fantozzi, F. & Frassoldati, A. & Bartocci, P. & Cinti, G. & Quagliarini, F. & Bidini, G. & Ranzi, E.M., 2016. "An experimental and kinetic modeling study of glycerol pyrolysis," Applied Energy, Elsevier, vol. 184(C), pages 68-76.
    6. Shen, Yafei, 2015. "Chars as carbonaceous adsorbents/catalysts for tar elimination during biomass pyrolysis or gasification," Renewable and Sustainable Energy Reviews, Elsevier, vol. 43(C), pages 281-295.
    7. Fan, Yuyang & Tippayawong, Nakorn & Wei, Guoqiang & Huang, Zhen & Zhao, Kun & Jiang, Liqun & Zheng, Anqing & Zhao, Zengli & Li, Haibin, 2020. "Minimizing tar formation whilst enhancing syngas production by integrating biomass torrefaction pretreatment with chemical looping gasification," Applied Energy, Elsevier, vol. 260(C).
    8. Asadullah, Mohammad, 2014. "Biomass gasification gas cleaning for downstream applications: A comparative critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 40(C), pages 118-132.
    9. Singh, Renu & Shukla, Ashish, 2014. "A review on methods of flue gas cleaning from combustion of biomass," Renewable and Sustainable Energy Reviews, Elsevier, vol. 29(C), pages 854-864.
    10. Shen, Yafei & Zhao, Peitao & Shao, Qinfu & Takahashi, Fumitake & Yoshikawa, Kunio, 2015. "In situ catalytic conversion of tar using rice husk char/ash supported nickel–iron catalysts for biomass pyrolytic gasification combined with the mixing-simulation in fluidized-bed gasifier," Applied Energy, Elsevier, vol. 160(C), pages 808-819.
    11. Thapa, Sunil & Indrawan, Natarianto & Bhoi, Prakashbhai R. & Kumar, Ajay & Huhnke, Raymond L., 2019. "Tar reduction in biomass syngas using heat exchanger and vegetable oil bubbler," Energy, Elsevier, vol. 175(C), pages 402-409.
    12. Ud Din, Zia & Zainal, Z.A., 2016. "Biomass integrated gasification–SOFC systems: Technology overview," Renewable and Sustainable Energy Reviews, Elsevier, vol. 53(C), pages 1356-1376.
    13. Zou, Xuehua & Chen, Tianhu & Zhang, Ping & Chen, Dong & He, Junkai & Dang, Yanliu & Ma, Zhiyuan & Chen, Ye & Toloueinia, Panteha & Zhu, Chengzhu & Xie, Jingjing & Liu, Haibo & Suib, Steven L., 2018. "High catalytic performance of Fe-Ni/Palygorskite in the steam reforming of toluene for hydrogen production," Applied Energy, Elsevier, vol. 226(C), pages 827-837.
    14. Jiang, Shengjuan & Hu, Xun & Xia, Daohong & Li, Chun-Zhu, 2016. "Formation of aromatic ring structures during the thermal treatment of mallee wood cylinders at low temperature," Applied Energy, Elsevier, vol. 183(C), pages 542-551.
    15. Se-Won Park & Sang-Yeop Lee & Yean-Ouk Jeong & Gun-Ho Han & Yong-Chil Seo, 2018. "Effects of Oxygen Enrichment in Air Oxidants on Biomass Gasification Efficiency and the Reduction of Tar Emissions," Energies, MDPI, vol. 11(10), pages 1-13, October.
    16. Fang, Neng & Li, Zhengqi & Xie, Cheng & Liu, Shuxuan & Zeng, Lingyan & Chen, Zhichao & Zhang, Bin, 2020. "The application of fly ash gasification for purifying the raw syngas in an industrial-scale entrained flow gasifier," Energy, Elsevier, vol. 195(C).
    17. Yuan, Hongyou & Wu, Shubin & Yin, Xiuli & Huang, Yanqin & Guo, Daliang & Wu, Chuangzhi, 2018. "Adjustment of biomass product gas to raise H2/CO ratio and remove tar over sodium titanate catalysts," Renewable Energy, Elsevier, vol. 115(C), pages 288-298.
    18. Zhang, Xitong & Xu, Jiayu & Ran, Shuai & Gao, Ying & Lyu, Yinong & Pan, Yueshen & Cao, Fei & Lin, Yunhao & Yang, Zixu & Wang, Zhongxian & Guo, Dandan & Wang, Qi & Zhu, Lin & Zhu, Yuezhao, 2022. "Experimental study on catalytic pyrolysis of oily sludge for H2 production under new nickel-ore-based catalysts," Energy, Elsevier, vol. 249(C).
    19. Fang, Neng & Li, Zhengqi & Xie, Cheng & Liu, Shuxuan & Lu, Yue & Zeng, Lingyan & Chen, Zhichao, 2021. "Influence of the multi-burner bias angle on the air/particle flow characteristics in an improved fly ash entrained-flow gasifier," Energy, Elsevier, vol. 234(C).
    20. Gao, Ningbo & Salisu, Jamilu & Quan, Cui & Williams, Paul, 2021. "Modified nickel-based catalysts for improved steam reforming of biomass tar: A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 145(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:205:y:2017:i:c:p:802-812. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.