IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v136y2014icp242-249.html
   My bibliography  Save this article

Energy exploitation of acid gas with high H2S content by means of a chemical looping combustion system

Author

Listed:
  • García-Labiano, F.
  • de Diego, L.F.
  • Gayán, P.
  • Abad, A.
  • Cabello, A.
  • Adánez, J.
  • Sprachmann, G.

Abstract

In gas and petroleum industry, the waste gas stream from the sweetening process of a sour natural gas stream is commonly referred as acid gas. Chemical Looping Combustion (CLC) technology has the potential to exploit the combustible fraction of acid gas, H2S, to produce energy obtaining a flue gas highly concentrated on CO2 and SO2, which can be cost-effectively separated for subsequent applications, such as sulfuric acid production. At the same time, a concentrated CO2 stream ready for storage is obtained. The resistance of oxygen carriers to sulfur becomes crucial when an acid gas is subjected to a CLC process since the H2S content can be very high. In this work, a total of 41h of continuous operation with acid gas and H2S concentrations up to 20vol.% has been carried out in a 500 Wth CLC unit with two oxygen carriers based on Cu (Cu14γAl) and Fe (Fe20γAl). The formation of copper sulfides and the SO2 emissions in the air reactor made the Cu14γAl material not adequate for the process. In contrast, excellent results were obtained during acid gas combustion with the Fe20γAl oxygen carrier. H2S was fully burnt to SO2 in the fuel reactor at all operating conditions, SO2 was never detected in the gas outlet stream of the air reactor, and iron sulfides were never formed even at H2S concentrations as high as 20vol.%. Furthermore, it was found that a H2S content of 20vol.% in the acid gas was high enough to turn the CLC process into an auto-thermal process. Based on these results, it can be concluded that the Fe-based materials prepared by impregnation are very adequate to exploit the energy potential of acid gas mixtures with CO2 capture.

Suggested Citation

  • García-Labiano, F. & de Diego, L.F. & Gayán, P. & Abad, A. & Cabello, A. & Adánez, J. & Sprachmann, G., 2014. "Energy exploitation of acid gas with high H2S content by means of a chemical looping combustion system," Applied Energy, Elsevier, vol. 136(C), pages 242-249.
  • Handle: RePEc:eee:appene:v:136:y:2014:i:c:p:242-249
    DOI: 10.1016/j.apenergy.2014.09.041
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261914009891
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.apenergy.2014.09.041?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Aisyah, L. & Ashman, P.J. & Kwong, C.W., 2013. "Performance of coal fly-ash based oxygen carrier for the chemical looping combustion of synthesis gas," Applied Energy, Elsevier, vol. 109(C), pages 44-50.
    2. Moldenhauer, Patrick & Rydén, Magnus & Mattisson, Tobias & Younes, Mourad & Lyngfelt, Anders, 2014. "The use of ilmenite as oxygen carrier with kerosene in a 300W CLC laboratory reactor with continuous circulation," Applied Energy, Elsevier, vol. 113(C), pages 1846-1854.
    3. Adánez-Rubio, Iñaki & Abad, Alberto & Gayán, Pilar & García-Labiano, Francisco & de Diego, Luis F. & Adánez, Juan, 2014. "The fate of sulphur in the Cu-based Chemical Looping with Oxygen Uncoupling (CLOU) Process," Applied Energy, Elsevier, vol. 113(C), pages 1855-1862.
    4. Markström, Pontus & Linderholm, Carl & Lyngfelt, Anders, 2014. "Operation of a 100kW chemical-looping combustor with Mexican petroleum coke and Cerrejón coal," Applied Energy, Elsevier, vol. 113(C), pages 1830-1835.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Wang, Haiming & Liu, Guicai & Veksha, Andrei & Giannis, Apostolos & Lim, Teik-Thye & Lisak, Grzegorz, 2021. "Effective H2S control during chemical looping combustion by iron ore modified with alkaline earth metal oxides," Energy, Elsevier, vol. 218(C).
    2. García-Labiano, Francisco & de Diego, Luis F. & Cabello, Arturo & Gayán, Pilar & Abad, Alberto & Adánez, Juan & Sprachmann, Gerald, 2016. "Sulphuric acid production via Chemical Looping Combustion of elemental sulphur," Applied Energy, Elsevier, vol. 178(C), pages 736-745.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Nandy, Anirban & Loha, Chanchal & Gu, Sai & Sarkar, Pinaki & Karmakar, Malay K. & Chatterjee, Pradip K., 2016. "Present status and overview of Chemical Looping Combustion technology," Renewable and Sustainable Energy Reviews, Elsevier, vol. 59(C), pages 597-619.
    2. Samuel C. Bayham & Andrew Tong & Mandar Kathe & Liang-Shih Fan, 2016. "Chemical looping technology for energy and chemical production," Wiley Interdisciplinary Reviews: Energy and Environment, Wiley Blackwell, vol. 5(2), pages 216-241, March.
    3. Bayham, Samuel & McGiveron, Omar & Tong, Andrew & Chung, Elena & Kathe, Mandar & Wang, Dawei & Zeng, Liang & Fan, Liang-Shih, 2015. "Parametric and dynamic studies of an iron-based 25-kWth coal direct chemical looping unit using sub-bituminous coal," Applied Energy, Elsevier, vol. 145(C), pages 354-363.
    4. Wang, Haiming & Liu, Guicai & Veksha, Andrei & Giannis, Apostolos & Lim, Teik-Thye & Lisak, Grzegorz, 2021. "Effective H2S control during chemical looping combustion by iron ore modified with alkaline earth metal oxides," Energy, Elsevier, vol. 218(C).
    5. Imtiaz, Qasim & Broda, Marcin & Müller, Christoph R., 2014. "Structure–property relationship of co-precipitated Cu-rich, Al2O3- or MgAl2O4-stabilized oxygen carriers for chemical looping with oxygen uncoupling (CLOU)," Applied Energy, Elsevier, vol. 119(C), pages 557-565.
    6. Zhang, Yongxing & Doroodchi, Elham & Moghtaderi, Behdad, 2014. "Chemical looping combustion of ultra low concentration of methane with Fe2O3/Al2O3 and CuO/SiO2," Applied Energy, Elsevier, vol. 113(C), pages 1916-1923.
    7. Zhang, Shuai & Xiao, Rui & Zheng, Wenguang, 2014. "Comparative study between fluidized-bed and fixed-bed operation modes in pressurized chemical looping combustion of coal," Applied Energy, Elsevier, vol. 130(C), pages 181-189.
    8. Hu, Wenting & Donat, Felix & Scott, S.A. & Dennis, J.S., 2016. "Kinetics of oxygen uncoupling of a copper based oxygen carrier," Applied Energy, Elsevier, vol. 161(C), pages 92-100.
    9. Baloyi, J. & Bello-Ochende, T. & Meyer, J.P., 2014. "Thermodynamic optimisation and computational analysis of irreversibilities in a small-scale wood-fired circulating fluidised bed adiabatic combustor," Energy, Elsevier, vol. 70(C), pages 653-663.
    10. Zhang, Yongliang & Jin, Bo & Zou, Xixian & Zhao, Haibo, 2016. "A clean coal utilization technology based on coal pyrolysis and chemical looping with oxygen uncoupling: Principle and experimental validation," Energy, Elsevier, vol. 98(C), pages 181-189.
    11. Ströhle, Jochen & Orth, Matthias & Epple, Bernd, 2015. "Chemical looping combustion of hard coal in a 1MWth pilot plant using ilmenite as oxygen carrier," Applied Energy, Elsevier, vol. 157(C), pages 288-294.
    12. Knutsson, Pavleta & Linderholm, Carl, 2015. "Characterization of ilmenite used as oxygen carrier in a 100kW chemical-looping combustor for solid fuels," Applied Energy, Elsevier, vol. 157(C), pages 368-373.
    13. García-Labiano, Francisco & de Diego, Luis F. & Cabello, Arturo & Gayán, Pilar & Abad, Alberto & Adánez, Juan & Sprachmann, Gerald, 2016. "Sulphuric acid production via Chemical Looping Combustion of elemental sulphur," Applied Energy, Elsevier, vol. 178(C), pages 736-745.
    14. Lee, Jaehee & Han, Sang-Jun & Wee, Jung-Ho, 2014. "Synthesis of dry sorbents for carbon dioxide capture using coal fly ash and its performance," Applied Energy, Elsevier, vol. 131(C), pages 40-47.
    15. Pérez-Vega, R. & Abad, A. & Izquierdo, M.T. & Gayán, P. & de Diego, L.F. & Adánez, J., 2019. "Evaluation of Mn-Fe mixed oxide doped with TiO2 for the combustion with CO2 capture by Chemical Looping assisted by Oxygen Uncoupling," Applied Energy, Elsevier, vol. 237(C), pages 822-835.
    16. Chung, Cheng & Pottimurthy, Yaswanth & Xu, Mingyuan & Hsieh, Tien-Lin & Xu, Dikai & Zhang, Yitao & Chen, Yu-Yen & He, Pengfei & Pickarts, Marshall & Fan, Liang-Shih & Tong, Andrew, 2017. "Fate of sulfur in coal-direct chemical looping systems," Applied Energy, Elsevier, vol. 208(C), pages 678-690.
    17. Hamers, H.P. & Romano, M.C. & Spallina, V. & Chiesa, P. & Gallucci, F. & van Sint Annaland, M., 2015. "Boosting the IGCLC process efficiency by optimizing the desulfurization step," Applied Energy, Elsevier, vol. 157(C), pages 422-432.
    18. Iloeje, Chukwunwike O. & Zhao, Zhenlong & Ghoniem, Ahmed F., 2018. "Design and techno-economic optimization of a rotary chemical looping combustion power plant with CO2 capture," Applied Energy, Elsevier, vol. 231(C), pages 1179-1190.
    19. Zhang, Hao & Hong, Hui & Jiang, Qiongqiong & Deng, Ya'nan & Jin, Hongguang & Kang, Qilan, 2018. "Development of a chemical-looping combustion reactor having porous honeycomb chamber and experimental validation by using NiO/NiAl2O4," Applied Energy, Elsevier, vol. 211(C), pages 259-268.
    20. Tomasz Czakiert & Jaroslaw Krzywanski & Anna Zylka & Wojciech Nowak, 2022. "Chemical Looping Combustion: A Brief Overview," Energies, MDPI, vol. 15(4), pages 1-19, February.

    More about this item

    Keywords

    Acid gas; Chemical looping combustion; H2S; H2SO4; Oxygen carrier;
    All these keywords.

    JEL classification:

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:136:y:2014:i:c:p:242-249. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.