IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v98y2016icp181-189.html
   My bibliography  Save this article

A clean coal utilization technology based on coal pyrolysis and chemical looping with oxygen uncoupling: Principle and experimental validation

Author

Listed:
  • Zhang, Yongliang
  • Jin, Bo
  • Zou, Xixian
  • Zhao, Haibo

Abstract

The coal poly-generation system offers the possibility to produce value-added chemicals, synthetic gas fuels and electricity simultaneously, which can improve the coal utilization efficiency. To realize the multi-generation of gas, tar and heat/electricity with CO2 capture, a new clean coal utilization technology integrating coal pyrolysis and CLOU (chemical looping with oxygen uncoupling) process was proposed. Both thermodynamic process simulation and batch-scale fluidized bed CLOU experiments were conducted to verify its feasibility and obtain some fundamental features. From simulation results, the total exergy efficiency had been improved by 0.82 percent points compared to the typical coal poly-generation system. Based on CLOU experiments of two pyrolytic semicokes of SL lignite (SL-20 and SL-60), it was found that the reactor temperature and the semicoke characteristic were two key factors in determining the CLOU process, in which higher fuel reactor temperature and semicoke with shorter pyrolysis time were favorable to the conversion process. In addition, both the semicokes showed very high CO2 gas yield (higher than 99%) and relatively low unburned gas yields, whilst the combustion efficiencies reached to higher than 93%. The results suggested that SL-20 with CLOU temperature of 900 °C was more favorable for the operation of the new system.

Suggested Citation

  • Zhang, Yongliang & Jin, Bo & Zou, Xixian & Zhao, Haibo, 2016. "A clean coal utilization technology based on coal pyrolysis and chemical looping with oxygen uncoupling: Principle and experimental validation," Energy, Elsevier, vol. 98(C), pages 181-189.
  • Handle: RePEc:eee:energy:v:98:y:2016:i:c:p:181-189
    DOI: 10.1016/j.energy.2016.01.010
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544216000207
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2016.01.010?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Mondal, Monoj Kumar & Balsora, Hemant Kumar & Varshney, Prachi, 2012. "Progress and trends in CO2 capture/separation technologies: A review," Energy, Elsevier, vol. 46(1), pages 431-441.
    2. Riaza, J. & Gil, M.V. & Álvarez, L. & Pevida, C. & Pis, J.J. & Rubiera, F., 2012. "Oxy-fuel combustion of coal and biomass blends," Energy, Elsevier, vol. 41(1), pages 429-435.
    3. Li, Yuanyuan & Zhang, Guoqiang & Yang, Yongping & Zhai, Dailong & Zhang, Kai & Xu, Gang, 2014. "Thermodynamic analysis of a coal-based polygeneration system with partial gasification," Energy, Elsevier, vol. 72(C), pages 201-214.
    4. He, Chang & Feng, Xiao & Chu, Khim Hoong, 2013. "Process modeling and thermodynamic analysis of Lurgi fixed-bed coal gasifier in an SNG plant," Applied Energy, Elsevier, vol. 111(C), pages 742-757.
    5. Adánez-Rubio, Iñaki & Abad, Alberto & Gayán, Pilar & García-Labiano, Francisco & de Diego, Luis F. & Adánez, Juan, 2014. "The fate of sulphur in the Cu-based Chemical Looping with Oxygen Uncoupling (CLOU) Process," Applied Energy, Elsevier, vol. 113(C), pages 1855-1862.
    6. Pfaff, I. & Oexmann, J. & Kather, A., 2010. "Optimised integration of post-combustion CO2 capture process in greenfield power plants," Energy, Elsevier, vol. 35(10), pages 4030-4041.
    7. Hong, Jongsup & Chaudhry, Gunaranjan & Brisson, J.G. & Field, Randall & Gazzino, Marco & Ghoniem, Ahmed F., 2009. "Analysis of oxy-fuel combustion power cycle utilizing a pressurized coal combustor," Energy, Elsevier, vol. 34(9), pages 1332-1340.
    8. Chen, Xiaohui & Zheng, Danxing & Guo, Jing & Liu, Jingxiao & Ji, Peijun, 2013. "Energy analysis for low-rank coal based process system to co-produce semicoke, syngas and light oil," Energy, Elsevier, vol. 52(C), pages 279-288.
    9. Jin, Hongguang & Gao, Lin & Han, Wei & Hong, Hui, 2010. "Prospect options of CO2 capture technology suitable for China," Energy, Elsevier, vol. 35(11), pages 4499-4506.
    10. Franco, Alessandro & Diaz, Ana R., 2009. "The future challenges for “clean coal technologies”: Joining efficiency increase and pollutant emission control," Energy, Elsevier, vol. 34(3), pages 348-354.
    11. Guo, Zhihang & Wang, Qinhui & Fang, Mengxiang & Luo, Zhongyang & Cen, Kefa, 2014. "Thermodynamic and economic analysis of polygeneration system integrating atmospheric pressure coal pyrolysis technology with circulating fluidized bed power plant," Applied Energy, Elsevier, vol. 113(C), pages 1301-1314.
    12. Babu, Ponnivalavan & Kumar, Rajnish & Linga, Praveen, 2013. "Pre-combustion capture of carbon dioxide in a fixed bed reactor using the clathrate hydrate process," Energy, Elsevier, vol. 50(C), pages 364-373.
    13. Fang, Mengxiang & Luo, Zhongyang & Li, Xuantian & Wang, Qinghui & Ni, Mingjiang & Cen, Kefa, 1998. "A multi-product cogeneration system using combined coal gasification and combustion," Energy, Elsevier, vol. 23(3), pages 203-212.
    14. Ishida, Masaru & Jin, Hongguang, 1994. "A new advanced power-generation system using chemical-looping combustion," Energy, Elsevier, vol. 19(4), pages 415-422.
    15. Jin, Bo & Zhao, Haibo & Zheng, Chuguang, 2015. "Optimization and control for CO2 compression and purification unit in oxy-combustion power plants," Energy, Elsevier, vol. 83(C), pages 416-430.
    16. Fu, Chao & Gundersen, Truls, 2012. "Using exergy analysis to reduce power consumption in air separation units for oxy-combustion processes," Energy, Elsevier, vol. 44(1), pages 60-68.
    17. Strube, R. & Pellegrini, G. & Manfrida, G., 2011. "The environmental impact of post-combustion CO2 capture with MEA, with aqueous ammonia, and with an aqueous ammonia-ethanol mixture for a coal-fired power plant," Energy, Elsevier, vol. 36(6), pages 3763-3770.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Li, Moshan & Lu, Yiyu & Hu, Erfeng & Yang, Yang & Tian, Yishui & Dai, Chongyang & Li, Chenhao, 2023. "Fast co-pyrolysis characteristics of high-alkali coal and polyethylene using infrared rapid heating," Energy, Elsevier, vol. 266(C).
    2. Xiang, Hongjin & Kuang, Yanxiang & He, Hongbo & Yao, Shujie, 2022. "Could tariffs reduce overcapacity and environmental pollution? Evidence from China’s adjustment of tariffs on coal," Economic Analysis and Policy, Elsevier, vol. 75(C), pages 129-144.
    3. Li, Bei & Liu, Gang & Bi, Ming-Shu & Li, Zhen-Bao & Han, Bing & Shu, Chi-Min, 2021. "Self-ignition risk classification for coal dust layers of three coal types on a hot surface," Energy, Elsevier, vol. 216(C).
    4. Wang, Delu & Ma, Gang & Song, Xuefeng & Liu, Yun, 2017. "Energy price slump and policy response in the coal-chemical industry district: A case study of Ordos with a system dynamics model," Energy Policy, Elsevier, vol. 104(C), pages 325-339.
    5. Suraj Prasad Pandey & Hua Yu & Chooikim Lau & Kam Ng, 2024. "New Coal Char-Based Building Products: Manufacturing, Engineering Performance, and Techno-Economic Analysis for the USA Market," Sustainability, MDPI, vol. 16(5), pages 1-26, February.
    6. Aziz, Muhammad & Juangsa, Firman Bagja & Kurniawan, Winarto & Budiman, Bentang Arief, 2016. "Clean Co-production of H2 and power from low rank coal," Energy, Elsevier, vol. 116(P1), pages 489-497.
    7. Yan, Jingchun & Shen, Laihong & Ou, Zhaowei & Wu, Jian & Jiang, Shouxi & Gu, Haiming, 2019. "Enhancing the performance of iron ore by introducing K and Na ions from biomass ashes in a CLC process," Energy, Elsevier, vol. 167(C), pages 168-180.
    8. Cao, Yang & He, Boshu & Ding, Guangchao & Su, Liangbin & Duan, Zhipeng, 2017. "Energy and exergy investigation on two improved IGCC power plants with different CO2 capture schemes," Energy, Elsevier, vol. 140(P1), pages 47-57.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Igor Donskoy, 2023. "Techno-Economic Efficiency Estimation of Promising Integrated Oxyfuel Gasification Combined-Cycle Power Plants with Carbon Capture," Clean Technol., MDPI, vol. 5(1), pages 1-18, February.
    2. Khalilpour, Rajab, 2014. "Multi-level investment planning and scheduling under electricity and carbon market dynamics: Retrofit of a power plant with PCC (post-combustion carbon capture) processes," Energy, Elsevier, vol. 64(C), pages 172-186.
    3. Jin, Bo & Zhao, Haibo & Zheng, Chuguang & Liang, Zhiwu, 2018. "Control optimization to achieve energy-efficient operation of the air separation unit in oxy-fuel combustion power plants," Energy, Elsevier, vol. 152(C), pages 313-321.
    4. Wawrzyńczak, Dariusz & Panowski, Marcin & Majchrzak-Kucęba, Izabela, 2019. "Possibilities of CO2 purification coming from oxy-combustion for enhanced oil recovery and storage purposes by adsorption method on activated carbon," Energy, Elsevier, vol. 180(C), pages 787-796.
    5. Li, Chunxi & Guo, Shiqi & Ye, Xuemin & Fu, Wenfeng, 2019. "Performance and thermoeconomics of solar-aided double-reheat coal-fired power systems with carbon capture," Energy, Elsevier, vol. 177(C), pages 1-15.
    6. Lasek, Janusz A. & Janusz, Marcin & Zuwała, Jarosław & Głód, Krzysztof & Iluk, Andrzej, 2013. "Oxy-fuel combustion of selected solid fuels under atmospheric and elevated pressures," Energy, Elsevier, vol. 62(C), pages 105-112.
    7. Song, Yawei & Su, Sheng & Liu, Yushuai & Zhao, Zheng & Xu, Kai & Xu, Jun & Jiang, Long & Wang, Yi & Hu, Song & Xiang, Jun, 2024. "Characteristics of OH formation during single coal particle ignition and volatile combustion in O2/N2 and O2/CO2 atmospheres," Energy, Elsevier, vol. 288(C).
    8. Liu, Peng & Le, Jiawei & Wang, Lanlan & Pan, Tieying & Lu, Xilan & Zhang, Dexiang, 2016. "Relevance of carbon structure to formation of tar and liquid alkane during coal pyrolysis," Applied Energy, Elsevier, vol. 183(C), pages 470-477.
    9. Sreenivasulu, B. & Gayatri, D.V. & Sreedhar, I. & Raghavan, K.V., 2015. "A journey into the process and engineering aspects of carbon capture technologies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 41(C), pages 1324-1350.
    10. Lombardi, L. & Carnevale, E.A., 2016. "Analysis of an innovative process for landfill gas quality improvement," Energy, Elsevier, vol. 109(C), pages 1107-1117.
    11. Bayham, Samuel & McGiveron, Omar & Tong, Andrew & Chung, Elena & Kathe, Mandar & Wang, Dawei & Zeng, Liang & Fan, Liang-Shih, 2015. "Parametric and dynamic studies of an iron-based 25-kWth coal direct chemical looping unit using sub-bituminous coal," Applied Energy, Elsevier, vol. 145(C), pages 354-363.
    12. Chaudhary Awais Salman & Ch Bilal Omer, 2020. "Process Modelling and Simulation of Waste Gasification-Based Flexible Polygeneration Facilities for Power, Heat and Biofuels Production," Energies, MDPI, vol. 13(16), pages 1-22, August.
    13. Kim, Taewoo & Park, So Dam & Lee, Uen Do & Park, Byeong Cheol & Park, Kyoung Il & Hong, Jongsup, 2021. "Thermodynamic analysis of the 2nd generation pressurized fluidized-bed combustion cycle utilizing an oxy-coal boiler and a gasifier," Energy, Elsevier, vol. 236(C).
    14. Bai, Yonghui & Wang, Yulong & Zhu, Shenghua & Li, Fan & Xie, Kechang, 2014. "Structural features and gasification reactivity of coal chars formed in Ar and CO2 atmospheres at elevated pressures," Energy, Elsevier, vol. 74(C), pages 464-470.
    15. Najmus S. Sifat & Yousef Haseli, 2019. "A Critical Review of CO 2 Capture Technologies and Prospects for Clean Power Generation," Energies, MDPI, vol. 12(21), pages 1-33, October.
    16. Liu, Yiyuan & Zhu, Qunzhi & Zhang, Tao & Yan, Xuefeng & Duan, Rui, 2020. "Analysis of chemical-looping hydrogen production and power generation system driven by solar energy," Renewable Energy, Elsevier, vol. 154(C), pages 863-874.
    17. Cao, Yang & He, Boshu & Ding, Guangchao & Su, Liangbin & Duan, Zhipeng, 2017. "Energy and exergy investigation on two improved IGCC power plants with different CO2 capture schemes," Energy, Elsevier, vol. 140(P1), pages 47-57.
    18. Dharmender Yadav & Munish K. Chandel & Pramod Kumar, 2016. "Suitability of CO 2 capture technologies for carbon capture and storage in India," Greenhouse Gases: Science and Technology, Blackwell Publishing, vol. 6(4), pages 519-530, August.
    19. Yi, Lan & Feng, Jie & Li, Wen-Ying, 2019. "Evaluation on a combined model for low-rank coal pyrolysis," Energy, Elsevier, vol. 169(C), pages 1012-1021.
    20. Moon, Ji-Hong & Jo, Sung-Ho & Park, Sung Jin & Khoi, Nguyen Hoang & Seo, Myung Won & Ra, Ho Won & Yoon, Sang-Jun & Yoon, Sung-Min & Lee, Jae-Goo & Mun, Tae-Young, 2019. "Carbon dioxide purity and combustion characteristics of oxy firing compared to air firing in a pilot-scale circulating fluidized bed," Energy, Elsevier, vol. 166(C), pages 183-192.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:98:y:2016:i:c:p:181-189. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.