IDEAS home Printed from https://ideas.repec.org/a/wly/greenh/v8y2018i1p106-119.html
   My bibliography  Save this article

Comparison of pyrite cinder with synthetic and natural iron†based oxygen carriers in coal†fueled chemical†looping combustion

Author

Listed:
  • Shuai Zhang
  • Rui Xiao

Abstract

Pyrite cinder, a Fe2O3†containing industrial waste derived from the sulfuric acid manufacturing industry, was compared with the synthetic and natural iron†based oxygen carriers, to explore its potential superiority in coal†fueled chemical†looping combustion. The oxygen carriers were evaluated through a lab†scale fluidized†bed reactor regarding their reactivity, recyclability, and attrition performance. The results showed that pyrite cinder prevailed over synthetic and natural iron†based oxygen carriers in terms of the reactivity. Similar CO2 yields were obtained by both pyrite cinder and synthetic Fe†Al(10nm) oxygen carrier, but the char conversion rate for pyrite cinder was obviously higher than that of synthetic and natural iron†based oxygen carriers. As for the cyclic reaction behavior, both pyrite cinder and natural MAC iron ore performed well regarding the stable yield of CO2, whereas synthetic Fe†Al(10nm) oxygen carrier showed a poor resistance to the decay of reactivity and occurrence of severe sintering. The attrition performance of three oxygen carriers under different operation parameters showed that the particle collision and the collisions between oxygen carrier particle and reactor wall were the major triggers to the attrition. The cyclic attrition tests showed that the abrasion†resistant capability for the pyrite cinder pelletized by the double†roller squeezing granulation method was lower than that of synthetic and natural iron†based oxygen carriers. It can be concluded that the pyrite cinder would be an outstanding candidate as the iron†based oxygen carrier, but its mechanical strength should be enhanced before produced in large scale. © 2017 Society of Chemical Industry and John Wiley & Sons, Ltd.

Suggested Citation

  • Shuai Zhang & Rui Xiao, 2018. "Comparison of pyrite cinder with synthetic and natural iron†based oxygen carriers in coal†fueled chemical†looping combustion," Greenhouse Gases: Science and Technology, Blackwell Publishing, vol. 8(1), pages 106-119, February.
  • Handle: RePEc:wly:greenh:v:8:y:2018:i:1:p:106-119
    DOI: 10.1002/ghg.1724
    as

    Download full text from publisher

    File URL: https://doi.org/10.1002/ghg.1724
    Download Restriction: no

    File URL: https://libkey.io/10.1002/ghg.1724?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. Chen, Huichao & Zhao, Changsui & Yang, Yanmei & Zhang, Pingping, 2012. "CO2 capture and attrition performance of CaO pellets with aluminate cement under pressurized carbonation," Applied Energy, Elsevier, vol. 91(1), pages 334-340.
    2. Bao, Jinhua & Li, Zhenshan & Cai, Ningsheng, 2014. "Interaction between iron-based oxygen carrier and four coal ashes during chemical looping combustion," Applied Energy, Elsevier, vol. 115(C), pages 549-558.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Wei, Guoqiang & Zhou, Huan & Huang, Zhen & Zheng, Anqing & Zhao, Kun & Lin, Yan & Chang, Guozhang & Zhao, Zengli & Li, Haibin & Fang, Yitian, 2021. "Reaction performance of Ce-enhanced hematite oxygen carrier in chemical looping reforming of biomass pyrolyzed gas coupled with CO2 splitting," Energy, Elsevier, vol. 215(PB).
    2. Ma, Zhong & Liu, Guofu & Zhang, Hui & Zhang, Shuai & Lu, Yonggang, 2021. "Evaluation of pyrite cinders from sulfuric acid production as oxygen carrier for chemical looping combustion," Energy, Elsevier, vol. 233(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Lara, Yolanda & Lisbona, Pilar & Martínez, Ana & Romeo, Luis M., 2013. "Design and analysis of heat exchanger networks for integrated Ca-looping systems," Applied Energy, Elsevier, vol. 111(C), pages 690-700.
    2. Perejón, Antonio & Romeo, Luis M. & Lara, Yolanda & Lisbona, Pilar & Martínez, Ana & Valverde, Jose Manuel, 2016. "The Calcium-Looping technology for CO2 capture: On the important roles of energy integration and sorbent behavior," Applied Energy, Elsevier, vol. 162(C), pages 787-807.
    3. Itskos, Grigorios & Grammelis, Panagiotis & Scala, Fabrizio & Pawlak-Kruczek, Halina & Coppola, Antonio & Salatino, Piero & Kakaras, Emmanuel, 2013. "A comparative characterization study of Ca-looping natural sorbents," Applied Energy, Elsevier, vol. 108(C), pages 373-382.
    4. Li, Yuan & Zhu, Lei, 2014. "Cost of energy saving and CO2 emissions reduction in China’s iron and steel sector," Applied Energy, Elsevier, vol. 130(C), pages 603-616.
    5. Gu, Haiming & Shen, Laihong & Zhong, Zhaoping & Niu, Xin & Liu, Weidong & Ge, Huijun & Jiang, Shouxi & Wang, Lulu, 2015. "Cement/CaO-modified iron ore as oxygen carrier for chemical looping combustion of coal," Applied Energy, Elsevier, vol. 157(C), pages 314-322.
    6. Su, Chenglin & Duan, Lunbo & Donat, Felix & Anthony, Edward John, 2018. "From waste to high value utilization of spent bleaching clay in synthesizing high-performance calcium-based sorbent for CO2 capture," Applied Energy, Elsevier, vol. 210(C), pages 117-126.
    7. Yu, Ching-tsung & Kuo, Huan-ting & Chen, Yi-ming, 2016. "Carbon dioxide removal using calcium aluminate carbonates on titanic oxide under warm-gas conditions," Applied Energy, Elsevier, vol. 162(C), pages 1122-1130.
    8. Nandy, Anirban & Loha, Chanchal & Gu, Sai & Sarkar, Pinaki & Karmakar, Malay K. & Chatterjee, Pradip K., 2016. "Present status and overview of Chemical Looping Combustion technology," Renewable and Sustainable Energy Reviews, Elsevier, vol. 59(C), pages 597-619.
    9. Gong, Xuzhong & Zhang, Tong & Zhang, Junqiang & Wang, Zhi & Liu, Junhao & Cao, Jianwei & Wang, Chuan, 2022. "Recycling and utilization of calcium carbide slag - current status and new opportunities," Renewable and Sustainable Energy Reviews, Elsevier, vol. 159(C).
    10. Hua, Xiuning & Fan, Yiran & Wang, Yidi & Fu, Tiantian & Fowler, G.D. & Zhao, Dongmei & Wang, Wei, 2017. "The behaviour of multiple reaction fronts during iron (III) oxide reduction in a non-steady state packed bed for chemical looping water splitting," Applied Energy, Elsevier, vol. 193(C), pages 96-111.
    11. Tian, Xin & Zhao, Haibo & Ma, Jinchen, 2017. "Cement bonded fine hematite and copper ore particles as oxygen carrier in chemical looping combustion," Applied Energy, Elsevier, vol. 204(C), pages 242-253.
    12. Li, Yingjie & Su, Mengying & Xie, Xin & Wu, Shuimu & Liu, Changtian, 2015. "CO2 capture performance of synthetic sorbent prepared from carbide slag and aluminum nitrate hydrate by combustion synthesis," Applied Energy, Elsevier, vol. 145(C), pages 60-68.
    13. Valverde, Jose M. & Sanchez-Jimenez, Pedro E. & Perejon, Antonio & Perez-Maqueda, Luis A., 2013. "Constant rate thermal analysis for enhancing the long-term CO2 capture of CaO at Ca-looping conditions," Applied Energy, Elsevier, vol. 108(C), pages 108-120.
    14. Lisbona, Pilar & Martínez, Ana & Romeo, Luis M., 2013. "Hydrodynamical model and experimental results of a calcium looping cycle for CO2 capture," Applied Energy, Elsevier, vol. 101(C), pages 317-322.
    15. Lee, Jaehee & Han, Sang-Jun & Wee, Jung-Ho, 2014. "Synthesis of dry sorbents for carbon dioxide capture using coal fly ash and its performance," Applied Energy, Elsevier, vol. 131(C), pages 40-47.
    16. Li, Bingyun & Duan, Yuhua & Luebke, David & Morreale, Bryan, 2013. "Advances in CO2 capture technology: A patent review," Applied Energy, Elsevier, vol. 102(C), pages 1439-1447.
    17. Parvez, Ashak Mahmud & Hafner, Selina & Hornberger, Matthias & Schmid, Max & Scheffknecht, Günter, 2021. "Sorption enhanced gasification (SEG) of biomass for tailored syngas production with in-situ CO2 capture: Current status, process scale-up experiences and outlook," Renewable and Sustainable Energy Reviews, Elsevier, vol. 141(C).
    18. Huang, Liang & Tang, Mingchen & Fan, Maohong & Cheng, Hansong, 2015. "Density functional theory study on the reaction between hematite and methane during chemical looping process," Applied Energy, Elsevier, vol. 159(C), pages 132-144.
    19. Huang, Xin & Fan, Maohong & Wang, Xingjun & Wang, Yonggang & Argyle, Morris D. & Zhu, Yufei, 2018. "A cost-effective approach to realization of the efficient methane chemical-looping combustion by using coal fly ash as a support for oxygen carrier," Applied Energy, Elsevier, vol. 230(C), pages 393-402.
    20. Xie, Xin & Li, Yingjie & Wang, Wenjing & Shi, Lei, 2014. "HCl removal using cycled carbide slag from calcium looping cycles," Applied Energy, Elsevier, vol. 135(C), pages 391-401.

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:wly:greenh:v:8:y:2018:i:1:p:106-119. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Wiley Content Delivery (email available below). General contact details of provider: https://doi.org/10.1002/(ISSN)2152-3878 .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.