IDEAS home Printed from https://ideas.repec.org/a/oup/ijlctc/v17y2022ip1223-1231..html
   My bibliography  Save this article

Dependence of electrical power output on collector size in Manzanares solar chimney power plant: an investigation for thermodynamic limits
[Solar chimney power plants: a review of the concepts, designs and performances]

Author

Listed:
  • Erdem Cuce

Abstract

Solar energy is at the forefront of renewable energy sources. Depending on the increasing energy need, the use of clean energy sources is inevitable in terms of human health and the environment. The application of solar chimney power plants (SCPPs) is one of the not very old and promising systems. SCPPs are systems that attract attention with their long life and simple working principles. SCPPs have three basic elements: collector, chimney and turbine, and optimizing these elements in terms of design and operational parameters plays a key role in the performance parameters of the system such as power output and efficiency. This study, which references the Manzanares pilot plant, aims at the collector dimensioning of the system to achieve the optimum power output and efficiency from the plant and to assess the upper thermodynamic limits of the Manzanares pilot plant. The most challenging aspect of SCPPs, in general, is their high cost, and large collector areas constitute a notable fraction of this cost. Therefore, for performance and cost optimization, collector dimensioning is of vital importance and reveals the innovative aspect of this study. For this purpose, a 3D 90° computational fluid dynamics model is created with ANSYS engineering software. RNG k-e turbulence model and discrete ordinates solar ray-tracing algorithm are applied to the model. In the study, solutions are taken in the dimensions of the pilot plant with an ambient temperature of 290 K and two different radiation intensities of 800 and 1000 W/m2. The collector radius (Rcoll) is increased up to 2 times the reference size and its effect on the system is evaluated. It is found that the plant, which produces an electrical power of 46.6 kW at 800 W/m2, will generate 138.3 kW of electrical power if the Rcoll is doubled. The optimum collector radius rate (Xcoll) is found to be in the range of 1.00–1.50. For the greater values of Xcoll than 1.50 (183 m), it is observed that the exponential increase in power output stops, and cost-related upper thermodynamic limits are achieved.

Suggested Citation

  • Erdem Cuce, 2022. "Dependence of electrical power output on collector size in Manzanares solar chimney power plant: an investigation for thermodynamic limits [Solar chimney power plants: a review of the concepts, des," International Journal of Low-Carbon Technologies, Oxford University Press, vol. 17, pages 1223-1231.
    • Handle: RePEc:oup:ijlctc:v:17:y:2022:i::p:1223-1231.
    as

    Download full text from publisher

    File URL: http://hdl.handle.net/10.1093/ijlct/ctac094
    Download Restriction: Access to full text is restricted to subscribers.
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Zhou, Xinping & Yang, Jiakuan & Xiao, Bo & Hou, Guoxiang, 2007. "Simulation of a pilot solar chimney thermal power generating equipment," Renewable Energy, Elsevier, vol. 32(10), pages 1637-1644.
    2. Erdem Cuce & Abhishek Saxena & Pinar Mert Cuce & Harun Sen & Shaopeng Guo & K Sudhakar, 2021. "Performance assessment of solar chimney power plants with the impacts of divergent and convergent chimney geometry," International Journal of Low-Carbon Technologies, Oxford University Press, vol. 16(3), pages 704-714.
    3. Erdem Cuce & Abhishek Saxena & Pinar Mert Cuce & Harun Sen & Hasan Eroglu & Shanmuga Priya Selvanathan & Kumarasamy Sudhakar & Md Hasanuzzaman, 2022. "Performance assessment of solar chimney power plants with natural thermal energy storage materials on ground: CFD analysis with experimental validation [Optimised performance of a thermally resisti," International Journal of Low-Carbon Technologies, Oxford University Press, vol. 17, pages 752-759.
    4. Gitan, Ali Ahmed & Abdulmalek, Shaymaa Husham & Dihrab, Salwan S., 2015. "Tracking collector consideration of tilted collector solar updraft tower power plant under Malaysia climate conditions," Energy, Elsevier, vol. 93(P2), pages 1467-1477.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Rabehi, Rayan & Chaker, Abla & Ming, Tingzhen & Gong, Tingrui, 2018. "Numerical simulation of solar chimney power plant adopting the fan model," Renewable Energy, Elsevier, vol. 126(C), pages 1093-1101.
    2. Haotian Liu & Justin Weibel & Eckhard Groll, 2017. "Performance Analysis of an Updraft Tower System for Dry Cooling in Large-Scale Power Plants," Energies, MDPI, vol. 10(11), pages 1-23, November.
    3. Zuo, Lu & Qu, Ning & Liu, Zihan & Ding, Ling & Dai, Pengzhan & Xu, Bofeng & Yuan, Yue, 2020. "Performance study and economic analysis of wind supercharged solar chimney power plant," Renewable Energy, Elsevier, vol. 156(C), pages 837-850.
    4. Mehdipour, R. & Golzardi, S. & Baniamerian, Z., 2020. "Experimental justification of poor thermal and flow performance of solar chimney by an innovative indoor experimental setup," Renewable Energy, Elsevier, vol. 157(C), pages 1089-1101.
    5. Pinar Mert Cuce & Erdem Cuce & Saad Alshahrani & Shaik Saboor & Harun Sen & Ibham Veza & C. Ahamed Saleel, 2022. "Performance Evaluation of Solar Chimney Power Plants with Bayburt Stone and Basalt on the Ground as Natural Energy Storage Material," Sustainability, MDPI, vol. 14(17), pages 1-14, September.
    6. Maia, C.B. & Castro Silva, J.O. & Cabezas-Gómez, L. & Hanriot, S.M. & Ferreira, A.G., 2013. "Energy and exergy analysis of the airflow inside a solar chimney," Renewable and Sustainable Energy Reviews, Elsevier, vol. 27(C), pages 350-361.
    7. Tingzhen, Ming & Wei, Liu & Guoling, Xu & Yanbin, Xiong & Xuhu, Guan & Yuan, Pan, 2008. "Numerical simulation of the solar chimney power plant systems coupled with turbine," Renewable Energy, Elsevier, vol. 33(5), pages 897-905.
    8. Nsengiyumva, Walter & Chen, Shi Guo & Hu, Lihua & Chen, Xueyong, 2018. "Recent advancements and challenges in Solar Tracking Systems (STS): A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 81(P1), pages 250-279.
    9. Zhou, Xinping & Wang, Fang & Ochieng, Reccab M., 2010. "A review of solar chimney power technology," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(8), pages 2315-2338, October.
    10. Erdem Cuce & Abhishek Saxena & Pinar Mert Cuce & Harun Sen & Hasan Eroglu & Shanmuga Priya Selvanathan & Kumarasamy Sudhakar & Md Hasanuzzaman, 2022. "Performance assessment of solar chimney power plants with natural thermal energy storage materials on ground: CFD analysis with experimental validation [Optimised performance of a thermally resisti," International Journal of Low-Carbon Technologies, Oxford University Press, vol. 17, pages 752-759.
    11. Abedi, Mahyar & Tan, Xu & Klausner, James F. & Bénard, Andre, 2023. "Solar desalination chimneys: Investigation on the feasibility of integrating solar chimneys with humidification–dehumidification systems," Renewable Energy, Elsevier, vol. 202(C), pages 88-102.
    12. Thirugnanasambandam, Mirunalini & Iniyan, S. & Goic, Ranko, 2010. "A review of solar thermal technologies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(1), pages 312-322, January.
    13. Suad Hassan Danook & Hussein A. Z. AL-bonsrulah & Ishak Hashim & Dhinakaran Veeman, 2021. "CFD Simulation of a 3D Solar Chimney Integrated with an Axial Turbine for Power Generation," Energies, MDPI, vol. 14(18), pages 1-22, September.
    14. Guo, Peng-hua & Li, Jing-yin & Wang, Yuan, 2014. "Numerical simulations of solar chimney power plant with radiation model," Renewable Energy, Elsevier, vol. 62(C), pages 24-30.
    15. Kasaeian, A.B. & Heidari, E. & Vatan, Sh. Nasiri, 2011. "Experimental investigation of climatic effects on the efficiency of a solar chimney pilot power plant," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(9), pages 5202-5206.
    16. Neeraj Mehla & Krishan Kumar & Manoj Kumar, 2019. "Thermal analysis of solar updraft tower by using different absorbers with convergent chimney," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 21(3), pages 1251-1269, June.
    17. Mehran Ghalamchi & Alibakhsh Kasaeian & Mohammad Hossein Ahmadi & Mehrdad Ghalamchi, 2017. "Evolving ICA and HGAPSO algorithms for prediction of outlet temperatures of constructed solar chimney," International Journal of Low-Carbon Technologies, Oxford University Press, vol. 12(2), pages 84-95.
    18. Li, Jing-yin & Guo, Peng-hua & Wang, Yuan, 2012. "Effects of collector radius and chimney height on power output of a solar chimney power plant with turbines," Renewable Energy, Elsevier, vol. 47(C), pages 21-28.
    19. Samimi-Akhijahani, Hadi & Arabhosseini, Akbar, 2018. "Accelerating drying process of tomato slices in a PV-assisted solar dryer using a sun tracking system," Renewable Energy, Elsevier, vol. 123(C), pages 428-438.
    20. Hafez, A.Z. & Soliman, A. & El-Metwally, K.A. & Ismail, I.M., 2017. "Tilt and azimuth angles in solar energy applications – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 77(C), pages 147-168.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:oup:ijlctc:v:17:y:2022:i::p:1223-1231.. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Oxford University Press (email available below). General contact details of provider: https://academic.oup.com/ijlct .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.