IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v14y2022i13p7667-d846082.html
   My bibliography  Save this article

A Study on Parametric Design Method for Optimization of Daylight in Commercial Building’s Atrium in Cold Regions

Author

Listed:
  • Yibing Xue

    (School of Architecture and Urban Planning, Shandong Jianzhu University, Jinan 250100, China)

  • Wenhan Liu

    (School of Architecture and Urban Planning, Shandong Jianzhu University, Jinan 250100, China)

Abstract

With the development of urbanization, more and more commercial buildings are built in cities, which is resulting in a large amount of building energy consumption that threatens the ecological environment of the earth. Lighting energy in commercial buildings occupies a large proportion of consumption, and improving the quality of natural daylight in commercial atriums is of great significance for building energy efficiency as well as improving indoor comfort. This paper proposes a method for optimizing the daylight quality of commercial atriums. Starting from the perspective of parametric design, this paper investigates the current status and theoretical research on the natural daylight of commercial atriums in cold regions, taking Jinan, China, as an example. Dynamic daylight and glare simulations were performed using Rhino + Grasshopper and Ladybug + Honeybee for every design parameter in the system, followed by correlation analysis and multiple linear regression analysis using SPSS to determine the degree of influence of each design parameter on the daylight quality of the atrium. Based on the results of the above analysis, the multi-objective optimization plug-in Octopus is used to find the combination of design parameters that can achieve the best indoor daylight. The results show that among a total of fourteen atrium design parameters, seven of them are significantly correlated with atrium daylight, and after regression analysis, it is found that the atrium design parameters affect the atrium daylight and glare in the following order: Skylight VT, Skylight ratio, Atrium inclination, Fabric coverage, Fabric VT, Wall reflectivity, Roof reflectivity. The optimal design parameters for commercial atrium daylight quality are obtained according to the Pareto front solution set, which provides some reference and ideas for improving the optimization of commercial atrium daylight in cold regions of China.

Suggested Citation

  • Yibing Xue & Wenhan Liu, 2022. "A Study on Parametric Design Method for Optimization of Daylight in Commercial Building’s Atrium in Cold Regions," Sustainability, MDPI, vol. 14(13), pages 1-22, June.
    • Handle: RePEc:gam:jsusta:v:14:y:2022:i:13:p:7667-:d:846082
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/14/13/7667/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/14/13/7667/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Mangkuto, Rizki A. & Rohmah, Mardliyahtur & Asri, Anindya Dian, 2016. "Design optimisation for window size, orientation, and wall reflectance with regard to various daylight metrics and lighting energy demand: A case study of buildings in the tropics," Applied Energy, Elsevier, vol. 164(C), pages 211-219.
    2. Freewan, Ahmed A. & Shao, Li & Riffat, Saffa, 2009. "Interactions between louvers and ceiling geometry for maximum daylighting performance," Renewable Energy, Elsevier, vol. 34(1), pages 223-232.
    3. Acosta, Ignacio & Varela, Carmen & Molina, Juan Francisco & Navarro, Jaime & Sendra, Juan José, 2018. "Energy efficiency and lighting design in courtyards and atriums: A predictive method for daylight factors," Applied Energy, Elsevier, vol. 211(C), pages 1216-1228.
    4. Li, Danny H.W., 2010. "A review of daylight illuminance determinations and energy implications," Applied Energy, Elsevier, vol. 87(7), pages 2109-2118, July.
    5. Ignacio Acosta & Jaime Navarro & Juan J. Sendra, 2011. "Towards an Analysis of Daylighting Simulation Software," Energies, MDPI, vol. 4(7), pages 1-15, June.
    6. Delgarm, N. & Sajadi, B. & Kowsary, F. & Delgarm, S., 2016. "Multi-objective optimization of the building energy performance: A simulation-based approach by means of particle swarm optimization (PSO)," Applied Energy, Elsevier, vol. 170(C), pages 293-303.
    7. Li, Wenliang & Zhou, Yuyu & Cetin, Kristen & Eom, Jiyong & Wang, Yu & Chen, Gang & Zhang, Xuesong, 2017. "Modeling urban building energy use: A review of modeling approaches and procedures," Energy, Elsevier, vol. 141(C), pages 2445-2457.
    8. Cheng, Yuanda & Gao, Min & Dong, Jiankai & Jia, Jie & Zhao, Xudong & Li, Guiqiang, 2018. "Investigation on the daylight and overall energy performance of semi-transparent photovoltaic facades in cold climatic regions of China," Applied Energy, Elsevier, vol. 232(C), pages 517-526.
    9. Rakha, Tarek & Nassar, Khaled, 2011. "Genetic algorithms for ceiling form optimization in response to daylight levels," Renewable Energy, Elsevier, vol. 36(9), pages 2348-2356.
    10. Heiselberg, Per & Brohus, Henrik & Hesselholt, Allan & Rasmussen, Henrik & Seinre, Erkki & Thomas, Sara, 2009. "Application of sensitivity analysis in design of sustainable buildings," Renewable Energy, Elsevier, vol. 34(9), pages 2030-2036.
    11. Ochoa, Carlos E. & Aries, Myriam B.C. & van Loenen, Evert J. & Hensen, Jan L.M., 2012. "Considerations on design optimization criteria for windows providing low energy consumption and high visual comfort," Applied Energy, Elsevier, vol. 95(C), pages 238-245.
    12. Li, Hangxin & Wang, Shengwei & Cheung, Howard, 2018. "Sensitivity analysis of design parameters and optimal design for zero/low energy buildings in subtropical regions," Applied Energy, Elsevier, vol. 228(C), pages 1280-1291.
    13. Jie Li & Qichao Ban & Xueming (Jimmy) Chen & Jiawei Yao, 2019. "Glazing Sizing in Large Atrium Buildings: A Perspective of Balancing Daylight Quantity and Visual Comfort," Energies, MDPI, vol. 12(4), pages 1-14, February.
    14. Khoroshiltseva, Marina & Slanzi, Debora & Poli, Irene, 2016. "A Pareto-based multi-objective optimization algorithm to design energy-efficient shading devices," Applied Energy, Elsevier, vol. 184(C), pages 1400-1410.
    15. Chow, Stanley K.H. & Li, Danny H.W. & Lee, Eric W.M. & Lam, Joseph C., 2013. "Analysis and prediction of daylighting and energy performance in atrium spaces using daylight-linked lighting controls," Applied Energy, Elsevier, vol. 112(C), pages 1016-1024.
    16. Myunghwan Oh & Minsu Jang & Jaesik Moon & Seungjun Roh, 2019. "Evaluation of Building Energy and Daylight Performance of Electrochromic Glazing for Optimal Control in Three Different Climate Zones," Sustainability, MDPI, vol. 11(1), pages 1-23, January.
    17. Ran Yi & Li Shao & Yuehong Su & Saffa Riffat, 2009. "Daylighting performance of atriums in subtropical climate," International Journal of Low-Carbon Technologies, Oxford University Press, vol. 4(4), pages 230-237, June.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Theodora Mavridou & Nikolaos Nanos & Lambros Doulos, 2023. "Modular Construction of Industrial Buildings and Lean Thinking—Identifying the Role of Daylight through a Case Study," Sustainability, MDPI, vol. 15(18), pages 1-15, September.
    2. Qibo Liu & Xiao Han & Yuheng Yan & Juan Ren, 2023. "A Parametric Design Method for the Lighting Environment of a Library Building Based on Building Performance Evaluation," Energies, MDPI, vol. 16(2), pages 1-20, January.
    3. Hao Hu & Hui Zhang & Li Wang & Zikang Ke, 2023. "Evaluation and Design of Parameterized Dynamic Daylighting for Large-Space Buildings," Sustainability, MDPI, vol. 15(14), pages 1-28, July.
    4. Zihan Zhang & Wanjiang Wang & Junkang Song & Zhe Wang & Weiyi Wang, 2022. "Multi-Objective Optimization of Ultra-Low Energy Consumption Buildings in Severely Cold Regions Considering Life Cycle Performance," Sustainability, MDPI, vol. 14(24), pages 1-17, December.
    5. Dongdong Jia & Wengang Zheng & Xiaoming Wei & Wenzhong Guo & Qian Zhao & Guohua Gao, 2023. "Parametric Design and Genetic Algorithm Optimization of a Natural Light Stereoscopic Cultivation Frame," Agriculture, MDPI, vol. 14(1), pages 1-18, December.
    6. Kunhao Liu & Lianglin Zou & Yuanlong Li & Kai Wang & Haiyu Wang & Jifeng Song, 2023. "Measurement and Analysis of Light Leakage in Plastic Optical Fiber Daylighting System," Sustainability, MDPI, vol. 15(4), pages 1-14, February.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Mangkuto, Rizki A. & Rohmah, Mardliyahtur & Asri, Anindya Dian, 2016. "Design optimisation for window size, orientation, and wall reflectance with regard to various daylight metrics and lighting energy demand: A case study of buildings in the tropics," Applied Energy, Elsevier, vol. 164(C), pages 211-219.
    2. Alejandra Susa-Páez & María Beatriz Piderit-Moreno, 2020. "Geometric Optimization of Atriums with Natural Lighting Potential for Detached High-Rise Buildings," Sustainability, MDPI, vol. 12(16), pages 1-40, August.
    3. Sun, Yanyi & Liang, Runqi & Wu, Yupeng & Wilson, Robin & Rutherford, Peter, 2017. "Development of a comprehensive method to analyse glazing systems with Parallel Slat Transparent Insulation material (PS-TIM)," Applied Energy, Elsevier, vol. 205(C), pages 951-963.
    4. Yu, Xu & Su, Yuehong, 2015. "Daylight availability assessment and its potential energy saving estimation –A literature review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 52(C), pages 494-503.
    5. Acosta, Ignacio & Campano, Miguel Ángel & Molina, Juan Francisco, 2016. "Window design in architecture: Analysis of energy savings for lighting and visual comfort in residential spaces," Applied Energy, Elsevier, vol. 168(C), pages 493-506.
    6. Wu, Yujie & Kämpf, Jérôme H. & Scartezzini, Jean-Louis, 2019. "Automated ‘Eye-sight’ Venetian blinds based on an embedded photometric device with real-time daylighting computing," Applied Energy, Elsevier, vol. 252(C), pages 1-1.
    7. Shaoxiong Li & Le Liu & Changhai Peng, 2020. "A Review of Performance-Oriented Architectural Design and Optimization in the Context of Sustainability: Dividends and Challenges," Sustainability, MDPI, vol. 12(4), pages 1-36, February.
    8. de Almeida Rocha, Ana Paula & Reynoso-Meza, Gilberto & Oliveira, Ricardo C.L.F. & Mendes, Nathan, 2020. "A pixel counting based method for designing shading devices in buildings considering energy efficiency, daylight use and fading protection," Applied Energy, Elsevier, vol. 262(C).
    9. Schito, Eva & Conti, Paolo & Testi, Daniele, 2018. "Multi-objective optimization of microclimate in museums for concurrent reduction of energy needs, visitors’ discomfort and artwork preservation risks," Applied Energy, Elsevier, vol. 224(C), pages 147-159.
    10. Saurbayeva, Assemgul & Memon, Shazim Ali & Kim, Jong, 2023. "Integrated multi-stage sensitivity analysis and multi-objective optimization approach for PCM integrated residential buildings in different climate zones," Energy, Elsevier, vol. 278(PB).
    11. Solène Goy & François Maréchal & Donal Finn, 2020. "Data for Urban Scale Building Energy Modelling: Assessing Impacts and Overcoming Availability Challenges," Energies, MDPI, vol. 13(16), pages 1-23, August.
    12. Halil Alibaba, 2016. "Determination of Optimum Window to External Wall Ratio for Offices in a Hot and Humid Climate," Sustainability, MDPI, vol. 8(2), pages 1-21, February.
    13. Seok-Hyun Kim & Hakgeun Jeong & Soo Cho, 2019. "A Study on Changes of Window Thermal Performance by Analysis of Physical Test Results in Korea," Energies, MDPI, vol. 12(20), pages 1-17, October.
    14. Acosta, Ignacio & Munoz, Carmen & Campano, Miguel Angel & Navarro, Jaime, 2015. "Analysis of daylight factors and energy saving allowed by windows under overcast sky conditions," Renewable Energy, Elsevier, vol. 77(C), pages 194-207.
    15. Chen, Qian & Oh, Seung Jin & Burhan, Muhammad, 2020. "Design and optimization of a novel electrowetting-driven solar-indoor lighting system," Applied Energy, Elsevier, vol. 269(C).
    16. Lešnik, Maja & Kravanja, Stojan & Premrov, Miroslav & Žegarac Leskovar, Vesna, 2020. "Optimal design of timber-glass upgrade modules for vertical building extension from the viewpoints of energy efficiency and visual comfort," Applied Energy, Elsevier, vol. 270(C).
    17. Aniela Kaminska, 2020. "Impact of Building Orientation on Daylight Availability and Energy Savings Potential in an Academic Classroom," Energies, MDPI, vol. 13(18), pages 1-17, September.
    18. Mangkuto, R.A. & Wang, S. & Meerbeek, B.W. & Aries, M.B.C. & van Loenen, E.J., 2014. "Lighting performance and electrical energy consumption of a virtual window prototype," Applied Energy, Elsevier, vol. 135(C), pages 261-273.
    19. Zhenzhong Guan & Xiang Xu & Yibing Xue & Chongjie Wang, 2022. "Multi-Objective Optimization Design of Geometric Parameters of Atrium in nZEB Based on Energy Consumption, Carbon Emission and Cost," Sustainability, MDPI, vol. 15(1), pages 1-24, December.
    20. Seyedeh Farzaneh Mousavi Motlagh & Ali Sohani & Mohammad Djavad Saghafi & Hoseyn Sayyaadi & Benedetto Nastasi, 2021. "The Road to Developing Economically Feasible Plans for Green, Comfortable and Energy Efficient Buildings," Energies, MDPI, vol. 14(3), pages 1-30, January.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:14:y:2022:i:13:p:7667-:d:846082. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.