IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v15y2022i1p147-d1011210.html
   My bibliography  Save this article

Multi-Objective Optimization Design of Geometric Parameters of Atrium in nZEB Based on Energy Consumption, Carbon Emission and Cost

Author

Listed:
  • Zhenzhong Guan

    (School of Architecture and Urban Planning, Shandong Jianzhu University, Jinan 250100, China)

  • Xiang Xu

    (School of Architecture and Urban Planning, Shandong Jianzhu University, Jinan 250100, China)

  • Yibing Xue

    (School of Architecture and Urban Planning, Shandong Jianzhu University, Jinan 250100, China)

  • Chongjie Wang

    (School of Architecture and Urban Planning, Shandong Jianzhu University, Jinan 250100, China)

Abstract

Through the detailed design of the passive design of the geometric parameters of the atrium, it is beneficial to achieve the design goal of a nearly zero-energy building. In the architectural design stage, the geometric design parameters of the atrium are verified and evaluated with different objectives such as energy consumption, carbon emissions, and costs, and then the most appropriate solution according to different design requirements is selected, which can reduce energy consumption and save costs. This paper proposes a method to optimize the energy consumption of a building’s atrium. Taking Jinan City as an example, this paper conducted 1260 energy consumption simulations for buildings with different geometric parameters of the atrium, based on the investigation of the geometric scale and energy consumption of the multi-story office buildings with near-zero energy consumption in cold areas with atriums. The degree of influence of each parameter on building energy consumption was determined. Finally, the parameter selection combination with the best effect is proposed. The results show that the selected four parameters are significantly related to energy consumption, and a new atrium design parameter was found through the combined analysis of the parameters: the body shape coefficient of the atrium. It was found that the importance of atrium design parameters on building energy consumption is as follows: the body shape coefficient of the atrium, the height-span ratio of the atrium (DSR), the atrium building volume ratio (VR), the skylight area ratio (SR), the atrium width-to-depth ratio (FDR). Seven groups of optimal design parameters were obtained by analyzing the design decisions with energy consumption as the target. Taking carbon emission and cost as the targets, three groups of optimal design parameters were obtained according to the Pareto frontier solution set, such as DSR = 2, VR = 0.13, SR = 0.1, and FDR = 2.5. It provides some references and ideas for the optimization of the energy consumption of the atrium of multi-story nearly zero-energy office buildings in the cold regions of China.

Suggested Citation

  • Zhenzhong Guan & Xiang Xu & Yibing Xue & Chongjie Wang, 2022. "Multi-Objective Optimization Design of Geometric Parameters of Atrium in nZEB Based on Energy Consumption, Carbon Emission and Cost," Sustainability, MDPI, vol. 15(1), pages 1-24, December.
    • Handle: RePEc:gam:jsusta:v:15:y:2022:i:1:p:147-:d:1011210
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/15/1/147/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/15/1/147/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Mangkuto, Rizki A. & Rohmah, Mardliyahtur & Asri, Anindya Dian, 2016. "Design optimisation for window size, orientation, and wall reflectance with regard to various daylight metrics and lighting energy demand: A case study of buildings in the tropics," Applied Energy, Elsevier, vol. 164(C), pages 211-219.
    2. Lu, Yanyu & Dong, Jiankai & Liu, Jing, 2020. "Zonal modelling for thermal and energy performance of large space buildings: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 133(C).
    3. Seo Ryeung Ju & Jeong Eun Oh, 2020. "Design Elements in Apartments for Adapting to Climate: A Comparison between Korea and Singapore," Sustainability, MDPI, vol. 12(8), pages 1-17, April.
    4. Delgarm, N. & Sajadi, B. & Kowsary, F. & Delgarm, S., 2016. "Multi-objective optimization of the building energy performance: A simulation-based approach by means of particle swarm optimization (PSO)," Applied Energy, Elsevier, vol. 170(C), pages 293-303.
    5. Li, Danny H.W. & Yang, Liu & Lam, Joseph C., 2013. "Zero energy buildings and sustainable development implications – A review," Energy, Elsevier, vol. 54(C), pages 1-10.
    6. Diego Palma Rojas, 2014. "Atrium building design: key aspects to improve their thermal performance on the Mediterranean climate of Santiago de Chile," International Journal of Low-Carbon Technologies, Oxford University Press, vol. 9(4), pages 327-330.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Gupta, V. & Deb, C., 2023. "Envelope design for low-energy buildings in the tropics: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 186(C).
    2. Kangji Li & Lei Pan & Wenping Xue & Hui Jiang & Hanping Mao, 2017. "Multi-Objective Optimization for Energy Performance Improvement of Residential Buildings: A Comparative Study," Energies, MDPI, vol. 10(2), pages 1-23, February.
    3. Seyedeh Farzaneh Mousavi Motlagh & Ali Sohani & Mohammad Djavad Saghafi & Hoseyn Sayyaadi & Benedetto Nastasi, 2021. "The Road to Developing Economically Feasible Plans for Green, Comfortable and Energy Efficient Buildings," Energies, MDPI, vol. 14(3), pages 1-30, January.
    4. Chen, Xi & Yang, Hongxing & Peng, Jinqing, 2019. "Energy optimization of high-rise commercial buildings integrated with photovoltaic facades in urban context," Energy, Elsevier, vol. 172(C), pages 1-17.
    5. Chen, Xi & Yang, Hongxing & Sun, Ke, 2016. "A holistic passive design approach to optimize indoor environmental quality of a typical residential building in Hong Kong," Energy, Elsevier, vol. 113(C), pages 267-281.
    6. de Almeida Rocha, Ana Paula & Reynoso-Meza, Gilberto & Oliveira, Ricardo C.L.F. & Mendes, Nathan, 2020. "A pixel counting based method for designing shading devices in buildings considering energy efficiency, daylight use and fading protection," Applied Energy, Elsevier, vol. 262(C).
    7. Yibing Xue & Wenhan Liu, 2022. "A Study on Parametric Design Method for Optimization of Daylight in Commercial Building’s Atrium in Cold Regions," Sustainability, MDPI, vol. 14(13), pages 1-22, June.
    8. Li, Hangxin & Wang, Shengwei & Cheung, Howard, 2018. "Sensitivity analysis of design parameters and optimal design for zero/low energy buildings in subtropical regions," Applied Energy, Elsevier, vol. 228(C), pages 1280-1291.
    9. Schito, Eva & Conti, Paolo & Testi, Daniele, 2018. "Multi-objective optimization of microclimate in museums for concurrent reduction of energy needs, visitors’ discomfort and artwork preservation risks," Applied Energy, Elsevier, vol. 224(C), pages 147-159.
    10. Saurbayeva, Assemgul & Memon, Shazim Ali & Kim, Jong, 2023. "Integrated multi-stage sensitivity analysis and multi-objective optimization approach for PCM integrated residential buildings in different climate zones," Energy, Elsevier, vol. 278(PB).
    11. Ascione, Fabrizio & De Masi, Rosa Francesca & de Rossi, Filippo & Ruggiero, Silvia & Vanoli, Giuseppe Peter, 2016. "Optimization of building envelope design for nZEBs in Mediterranean climate: Performance analysis of residential case study," Applied Energy, Elsevier, vol. 183(C), pages 938-957.
    12. Deng, S. & Wang, R.Z. & Dai, Y.J., 2014. "How to evaluate performance of net zero energy building – A literature research," Energy, Elsevier, vol. 71(C), pages 1-16.
    13. Michael-Allan Millar & Bruce Elrick & Greg Jones & Zhibin Yu & Neil M. Burnside, 2020. "Roadblocks to Low Temperature District Heating," Energies, MDPI, vol. 13(22), pages 1-21, November.
    14. Halil Alibaba, 2016. "Determination of Optimum Window to External Wall Ratio for Offices in a Hot and Humid Climate," Sustainability, MDPI, vol. 8(2), pages 1-21, February.
    15. Roth, Jonathan & Martin, Amory & Miller, Clayton & Jain, Rishee K., 2020. "SynCity: Using open data to create a synthetic city of hourly building energy estimates by integrating data-driven and physics-based methods," Applied Energy, Elsevier, vol. 280(C).
    16. Pikas, Ergo & Thalfeldt, Martin & Kurnitski, Jarek & Liias, Roode, 2015. "Extra cost analyses of two apartment buildings for achieving nearly zero and low energy buildings," Energy, Elsevier, vol. 84(C), pages 623-633.
    17. Niemelä, Tuomo & Kosonen, Risto & Jokisalo, Juha, 2016. "Cost-optimal energy performance renovation measures of educational buildings in cold climate," Applied Energy, Elsevier, vol. 183(C), pages 1005-1020.
    18. Gao, Jiajia & Li, Anbang & Xu, Xinhua & Gang, Wenjie & Yan, Tian, 2018. "Ground heat exchangers: Applications, technology integration and potentials for zero energy buildings," Renewable Energy, Elsevier, vol. 128(PA), pages 337-349.
    19. Liang, Xinbin & Liu, Zhuoxuan & Wang, Jie & Jin, Xinqiao & Du, Zhimin, 2023. "Uncertainty quantification-based robust deep learning for building energy systems considering distribution shift problem," Applied Energy, Elsevier, vol. 337(C).
    20. Seok-Hyun Kim & Hakgeun Jeong & Soo Cho, 2019. "A Study on Changes of Window Thermal Performance by Analysis of Physical Test Results in Korea," Energies, MDPI, vol. 12(20), pages 1-17, October.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:15:y:2022:i:1:p:147-:d:1011210. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.