IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v16y2023i21p7274-d1268042.html
   My bibliography  Save this article

Ultra-Low-Temperature Refrigeration Systems: A Review and Performance Comparison of Refrigerants and Configurations

Author

Listed:
  • Muhammad Zahid Saeed

    (Department of Energy and Process Engineering, Norwegian University of Science and Technology (NTNU), 7491 Trondheim, Norway
    These authors contributed equally this work.)

  • Luca Contiero

    (Department of Energy and Process Engineering, Norwegian University of Science and Technology (NTNU), 7491 Trondheim, Norway
    These authors contributed equally this work.)

  • Stefanie Blust

    (Department of Energy and Process Engineering, Norwegian University of Science and Technology (NTNU), 7491 Trondheim, Norway)

  • Yosr Allouche

    (Department of Energy and Process Engineering, Norwegian University of Science and Technology (NTNU), 7491 Trondheim, Norway)

  • Armin Hafner

    (Department of Energy and Process Engineering, Norwegian University of Science and Technology (NTNU), 7491 Trondheim, Norway)

  • Trygve Magne Eikevik

    (Department of Energy and Process Engineering, Norwegian University of Science and Technology (NTNU), 7491 Trondheim, Norway)

Abstract

During the last decade, many industrial and medical applications have shown a requirement for low-temperature-cooling usage (from −40 to −80 °C), which cannot be efficiently obtained via the conventional refrigeration systems usually employed for medium-temperature applications (from 0 to −40 °C). A proper ultra-low-temperature (ULT) refrigeration system design is essential to achieve the desired output. The performance can be maximised via the suitable selection of the configuration and refrigerant for a specific temperature range. This work contributes a detailed overview of the different systems and refrigerants used in ultra-low-temperature applications. Different systems, such as single-stage vapour compression, multi-stage, cascade, auto-cascade, and air refrigeration cycles, are presented and discussed. An energy analysis is then carried out for these systems identifying the optimal system design and refrigerant selection to achieve the highest performance. This paper aims to provide the reader with a comprehensive background through an exhaustive review of refrigeration systems suitable for ultra-low-temperature applications. The effectiveness of these systems is proven numerically, mainly based on the temperature level and purpose of the application.

Suggested Citation

  • Muhammad Zahid Saeed & Luca Contiero & Stefanie Blust & Yosr Allouche & Armin Hafner & Trygve Magne Eikevik, 2023. "Ultra-Low-Temperature Refrigeration Systems: A Review and Performance Comparison of Refrigerants and Configurations," Energies, MDPI, vol. 16(21), pages 1-31, October.
    • Handle: RePEc:gam:jeners:v:16:y:2023:i:21:p:7274-:d:1268042
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/16/21/7274/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/16/21/7274/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Asgari, Sahar & Noorpoor, A.R. & Boyaghchi, Fateme Ahmadi, 2017. "Parametric assessment and multi-objective optimization of an internal auto-cascade refrigeration cycle based on advanced exergy and exergoeconomic concepts," Energy, Elsevier, vol. 125(C), pages 576-590.
    2. Llopis, Rodrigo & Sánchez, Daniel & Sanz-Kock, Carlos & Cabello, Ramón & Torrella, Enrique, 2015. "Energy and environmental comparison of two-stage solutions for commercial refrigeration at low temperature: Fluids and systems," Applied Energy, Elsevier, vol. 138(C), pages 133-142.
    3. Torrella, E. & Larumbe, J.A. & Cabello, R. & Llopis, R. & Sanchez, D., 2011. "A general methodology for energy comparison of intermediate configurations in two-stage vapour compression refrigeration systems," Energy, Elsevier, vol. 36(7), pages 4119-4124.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Sun, Zhili & Wang, Qifan & Xie, Zhiyuan & Liu, Shengchun & Su, Dandan & Cui, Qi, 2019. "Energy and exergy analysis of low GWP refrigerants in cascade refrigeration system," Energy, Elsevier, vol. 170(C), pages 1170-1180.
    2. Xinyu Meng & Yijian He & Lijuan He & Chenlei Zhao & Lifang Wang & Wenxi You & Jingbo Zhu, 2024. "A Review of the Energy-Saving Potential of Phase Change Material-Based Cascaded Refrigeration Systems in Chinese Food Cold Chain Industry," Energies, MDPI, vol. 17(19), pages 1-28, September.
    3. Janghorban Esfahani, Iman & Kang, Yong Tae & Yoo, ChangKyoo, 2014. "A high efficient combined multi-effect evaporation–absorption heat pump and vapor-compression refrigeration part 1: Energy and economic modeling and analysis," Energy, Elsevier, vol. 75(C), pages 312-326.
    4. Huang, Tao & Bacher, Peder & Møller, Jan Kloppenborg & D’Ettorre, Francesco & Markussen, Wiebke Brix, 2023. "A step towards digital operations—A novel grey-box approach for modelling the heat dynamics of ultra-low temperature freezing chambers," Applied Energy, Elsevier, vol. 349(C).
    5. Sun, Zhili & Liang, Youcai & Liu, Shengchun & Ji, Weichuan & Zang, Runqing & Liang, Rongzhen & Guo, Zhikai, 2016. "Comparative analysis of thermodynamic performance of a cascade refrigeration system for refrigerant couples R41/R404A and R23/R404A," Applied Energy, Elsevier, vol. 184(C), pages 19-25.
    6. Chen, Longxiang & Liu, Xi & Ye, Kai & Xie, Meina & Lan, Wenchao, 2023. "Thermodynamic and economic analysis of an integration system of multi-effect desalination (MED) with ice storage based on a heat pump," Energy, Elsevier, vol. 283(C).
    7. Rami Mansouri & Baby-Jean Robert Mungyeko Bisulandu & Adrian Ilinca, 2023. "Assessing Energy Performance and Environmental Impact of Low GWP Vapor Compression Chilled Water Systems," Energies, MDPI, vol. 16(12), pages 1-16, June.
    8. Mingzhang Pan & Huan Zhao & Dongwu Liang & Yan Zhu & Youcai Liang & Guangrui Bao, 2020. "A Review of the Cascade Refrigeration System," Energies, MDPI, vol. 13(9), pages 1-26, May.
    9. Purohit, Nilesh & Sharma, Vishaldeep & Sawalha, Samer & Fricke, Brian & Llopis, Rodrigo & Dasgupta, Mani Sankar, 2018. "Integrated supermarket refrigeration for very high ambient temperature," Energy, Elsevier, vol. 165(PA), pages 572-590.
    10. Mostafavi Sani, Mostafa & Noorpoor, Alireza & Shafie-Pour Motlagh, Majid, 2019. "Optimal model development of energy hub to supply water, heating and electrical demands of a cement factory," Energy, Elsevier, vol. 177(C), pages 574-592.
    11. Yu, Binbin & Yang, Jingye & Wang, Dandong & Shi, Junye & Guo, Zhikai & Chen, Jiangping, 2019. "Experimental energetic analysis of CO2/R41 blends in automobile air-conditioning and heat pump systems," Applied Energy, Elsevier, vol. 239(C), pages 1142-1153.
    12. Ziya Sogut, M., 2012. "Exergetic and environmental assessment of room air conditioners in Turkish market," Energy, Elsevier, vol. 46(1), pages 32-41.
    13. Gazda, Wiesław, 2013. "Application possibilities of the strategies of the air blast–cryogenic cooling process," Energy, Elsevier, vol. 62(C), pages 113-119.
    14. Song, Yulong & Wang, Haidan & Ma, Yuan & Yin, Xiang & Cao, Feng, 2022. "Energetic, economic, environmental investigation of carbon dioxide as the refrigeration alternative in new energy bus/railway vehicles’ air conditioning systems," Applied Energy, Elsevier, vol. 305(C).
    15. Mota-Babiloni, Adrián & Barbosa, Jader R. & Makhnatch, Pavel & Lozano, Jaime A., 2020. "Assessment of the utilization of equivalent warming impact metrics in refrigeration, air conditioning and heat pump systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 129(C).
    16. Megdouli, K. & Ejemni, N. & Nahdi, E. & Mhimid, A. & Kairouani, L., 2017. "Thermodynamic analysis of a novel ejector expansion transcritical CO2/N2O cascade refrigeration (NEETCR) system for cooling applications at low temperatures," Energy, Elsevier, vol. 128(C), pages 586-600.
    17. Yulong Song & Hongsheng Xie & Mengying Yang & Xiangyu Wei & Feng Cao & Xiang Yin, 2023. "A Comprehensive Assessment of the Refrigerant Charging Amount on the Global Performance of a Transcritical CO 2 -Based Bus Air Conditioning and Heat Pump System," Energies, MDPI, vol. 16(6), pages 1-21, March.
    18. Chen, Yi & Han, Wei & Jin, Hongguang, 2017. "Proposal and analysis of a novel heat-driven absorption–compression refrigeration system at low temperatures," Applied Energy, Elsevier, vol. 185(P2), pages 2106-2116.
    19. Yang, Mina & Jung, Chung Woo & Kang, Yong Tae, 2015. "Development of high efficiency cycles for domestic refrigerator-freezer application," Energy, Elsevier, vol. 93(P2), pages 2258-2266.
    20. Zhang, Ruiyuan & Su, Wen & Lin, Xinxing & Zhou, Naijun & Zhao, Li, 2020. "Thermodynamic analysis and parametric optimization of a novel S–CO2 power cycle for the waste heat recovery of internal combustion engines," Energy, Elsevier, vol. 209(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:16:y:2023:i:21:p:7274-:d:1268042. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.