IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v15y2022i22p8325-d966088.html
   My bibliography  Save this article

Turbulence Modeling of Iced Wind Turbine Airfoils

Author

Listed:
  • Fahed Martini

    (Wind Energy Research Laboratory, The University of Quebec at Rimouski, Rimouski, QC G5L 3A1, Canada)

  • Hussein Ibrahim

    (Technological Institute for Industrial Maintenance, Cégep de Sept-Îles, Sept-Îles, QC G4R 5B7, Canada)

  • Leidy Tatiana Contreras Montoya

    (Wind Energy Research Laboratory, The University of Quebec at Rimouski, Rimouski, QC G5L 3A1, Canada)

  • Patrick Rizk

    (Wind Energy Research Laboratory, The University of Quebec at Rimouski, Rimouski, QC G5L 3A1, Canada)

  • Adrian Ilinca

    (Wind Energy Research Laboratory, The University of Quebec at Rimouski, Rimouski, QC G5L 3A1, Canada)

Abstract

Icing is a severe problem faced by wind turbines operating in cold climates. It is affected by various fluctuating parameters. Due to ice accretion, a significant drop in the aerodynamic performance of the blades’ airfoils leads to productivity loss in wind turbines. When ice accretes on airfoils, it leads to a geometry deformation that seriously increases turbulence, particularly on the airfoil suction side at high angles of attack. Modeling and simulation are indispensable tools to estimate the effect of icing on the operation of wind turbines and gain a better understanding of the phenomenon. This paper presents a numerical study to assess the effect of surface roughness distribution, along with the effect of two turbulence models on estimating wind turbine airfoils’ aerodynamic performance losses in the presence of ice. Aerodynamic parameter estimation was performed using ANSYS FLUENT, while ice accretion was simulated using ANSYS FENSAP-ICE. The results using the adopted modeling approaches and the simulation tools were compared with another numerical study and validated against experimental data. The validation process demonstrated the model’s accuracy when considering roughness distribution via the beading model available in ANSYS FENSAP-ICE. The two turbulence models examined (Spalart–Allmaras and k-ω SST) gave comparable results except for the drag at high angles of attack. The k-ω SST model was more efficient in replicating turbulence at high angles of attack, leading to higher accuracy in aerodynamic loss estimation.

Suggested Citation

  • Fahed Martini & Hussein Ibrahim & Leidy Tatiana Contreras Montoya & Patrick Rizk & Adrian Ilinca, 2022. "Turbulence Modeling of Iced Wind Turbine Airfoils," Energies, MDPI, vol. 15(22), pages 1-20, November.
  • Handle: RePEc:gam:jeners:v:15:y:2022:i:22:p:8325-:d:966088
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/15/22/8325/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/15/22/8325/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Fahed Martini & Leidy Tatiana Contreras Montoya & Adrian Ilinca, 2021. "Review of Wind Turbine Icing Modelling Approaches," Energies, MDPI, vol. 14(16), pages 1-26, August.
    2. Hu, Liangquan & Zhu, Xiaocheng & Hu, Chenxing & Chen, Jinge & Du, Zhaohui, 2017. "Wind turbines ice distribution and load response under icing conditions," Renewable Energy, Elsevier, vol. 113(C), pages 608-619.
    3. Villalpando, Fernando & Reggio, Marcelo & Ilinca, Adrian, 2016. "Prediction of ice accretion and anti-icing heating power on wind turbine blades using standard commercial software," Energy, Elsevier, vol. 114(C), pages 1041-1052.
    4. Zanon, Alessandro & De Gennaro, Michele & Kühnelt, Helmut, 2018. "Wind energy harnessing of the NREL 5 MW reference wind turbine in icing conditions under different operational strategies," Renewable Energy, Elsevier, vol. 115(C), pages 760-772.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Alina Fazylova & Baurzhan Tultayev & Teodor Iliev & Ivaylo Stoyanov & Ivan Beloev, 2023. "Development of a Control Unit for the Angle of Attack of a Vertically Axial Wind Turbine," Energies, MDPI, vol. 16(13), pages 1-20, July.
    2. Fahed Martini & Adrian Ilinca & Patrick Rizk & Hussein Ibrahim & Mohamad Issa, 2022. "A Survey of the Quasi-3D Modeling of Wind Turbine Icing," Energies, MDPI, vol. 15(23), pages 1-32, November.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Fahed Martini & Adrian Ilinca & Patrick Rizk & Hussein Ibrahim & Mohamad Issa, 2022. "A Survey of the Quasi-3D Modeling of Wind Turbine Icing," Energies, MDPI, vol. 15(23), pages 1-32, November.
    2. Stoyanov, D.B. & Nixon, J.D. & Sarlak, H., 2021. "Analysis of derating and anti-icing strategies for wind turbines in cold climates," Applied Energy, Elsevier, vol. 288(C).
    3. Sudhakar Gantasala & Narges Tabatabaei & Michel Cervantes & Jan-Olov Aidanpää, 2019. "Numerical Investigation of the Aeroelastic Behavior of a Wind Turbine with Iced Blades," Energies, MDPI, vol. 12(12), pages 1-24, June.
    4. Valery Okulov & Ivan Kabardin & Dmitry Mukhin & Konstantin Stepanov & Nastasia Okulova, 2021. "Physical De-Icing Techniques for Wind Turbine Blades," Energies, MDPI, vol. 14(20), pages 1-16, October.
    5. Guo, Wenfeng & Shen, He & Li, Yan & Feng, Fang & Tagawa, Kotaro, 2021. "Wind tunnel tests of the rime icing characteristics of a straight-bladed vertical axis wind turbine," Renewable Energy, Elsevier, vol. 179(C), pages 116-132.
    6. Akintayo T. Abolude & Wen Zhou, 2018. "A Comparative Computational Fluid Dynamic Study on the Effects of Terrain Type on Hub-Height Wind Aerodynamic Properties," Energies, MDPI, vol. 12(1), pages 1-14, December.
    7. Chen, Wanqiu & Qiu, Yingning & Feng, Yanhui & Li, Ye & Kusiak, Andrew, 2021. "Diagnosis of wind turbine faults with transfer learning algorithms," Renewable Energy, Elsevier, vol. 163(C), pages 2053-2067.
    8. Wang, Xuefei & Zeng, Xiangwu & Li, Xinyao & Li, Jiale, 2019. "Investigation on offshore wind turbine with an innovative hybrid monopile foundation: An experimental based study," Renewable Energy, Elsevier, vol. 132(C), pages 129-141.
    9. Wu, Zhenlong, 2019. "Rotor power performance and flow physics in lateral sinusoidal gusts," Energy, Elsevier, vol. 176(C), pages 917-928.
    10. Xu, Zhi & Zhang, Ting & Li, Xiaojuan & Li, Yan, 2023. "Effects of ambient temperature and wind speed on icing characteristics and anti-icing energy demand of a blade airfoil for wind turbine," Renewable Energy, Elsevier, vol. 217(C).
    11. Son, Chankyu & Kelly, Mark & Kim, Taeseong, 2021. "Boundary-layer transition model for icing simulations of rotating wind turbine blades," Renewable Energy, Elsevier, vol. 167(C), pages 172-183.
    12. Kiran Siddappaji & Mark Turner, 2022. "Improved Prediction of Aerodynamic Loss Propagation as Entropy Rise in Wind Turbines Using Multifidelity Analysis," Energies, MDPI, vol. 15(11), pages 1-44, May.
    13. Dong, Weiwei & Zhao, Guohua & Yüksel, Serhat & Dinçer, Hasan & Ubay, Gözde Gülseven, 2022. "A novel hybrid decision making approach for the strategic selection of wind energy projects," Renewable Energy, Elsevier, vol. 185(C), pages 321-337.
    14. Feng-Chang Gu & Hung-Cheng Chen, 2021. "An Anti-Fluctuation Compensator Design and Its Control Strategy for Wind Farm System," Energies, MDPI, vol. 14(19), pages 1-16, October.
    15. Akintayo Temiloluwa Abolude & Wen Zhou, 2018. "Assessment and Performance Evaluation of a Wind Turbine Power Output," Energies, MDPI, vol. 11(8), pages 1-15, August.
    16. Yang, Muchen & Xiao, Zhixiang, 2019. "Distributed roughness induced transition on wind-turbine airfoils simulated by four-equation k-ω-γ-Ar transition model," Renewable Energy, Elsevier, vol. 135(C), pages 1166-1177.
    17. Jiménez, Alfredo Arcos & García Márquez, Fausto Pedro & Moraleda, Victoria Borja & Gómez Muñoz, Carlos Quiterio, 2019. "Linear and nonlinear features and machine learning for wind turbine blade ice detection and diagnosis," Renewable Energy, Elsevier, vol. 132(C), pages 1034-1048.
    18. Rongjia Li & Guangya Zhu & Dalin Zhang, 2020. "Investigation on the Mechanism of Heat Load Reduction for the Thermal Anti-Icing System," Energies, MDPI, vol. 13(22), pages 1-19, November.
    19. Jokar, H. & Mahzoon, M. & Vatankhah, R., 2020. "Dynamic modeling and free vibration analysis of horizontal axis wind turbine blades in the flap-wise direction," Renewable Energy, Elsevier, vol. 146(C), pages 1818-1832.
    20. Gao, Linyue & Tao, Tao & Liu, Yongqian & Hu, Hui, 2021. "A field study of ice accretion and its effects on the power production of utility-scale wind turbines," Renewable Energy, Elsevier, vol. 167(C), pages 917-928.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:15:y:2022:i:22:p:8325-:d:966088. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.