IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v15y2022i13p4810-d852928.html
   My bibliography  Save this article

Multi-Objective Optimization Design of a Stator Coreless Multidisc Axial Flux Permanent Magnet Motor

Author

Listed:
  • Changchuang Huang

    (Department of Electrical Engineering, Harbin Institute of Technology, Harbin 150080, China)

  • Baoquan Kou

    (Department of Electrical Engineering, Harbin Institute of Technology, Harbin 150080, China)

  • Xiaokun Zhao

    (Department of Electrical Engineering, Harbin Institute of Technology, Harbin 150080, China)

  • Xu Niu

    (Department of Electrical Engineering, Harbin Institute of Technology, Harbin 150080, China)

  • Lu Zhang

    (Department of Electrical Engineering, Harbin Institute of Technology, Harbin 150080, China)

Abstract

The stator coreless axial flux permanent magnet (AFPM) motor with a compact structure, low torque ripple, and high efficiency is particularly suitable as a motor for electric propulsion systems. However, it still requires great effort to design an AFPM motor with higher torque density and lower torque ripple. In this paper, a stator coreless multidisc AFPM (SCM-AFPM) motor with a three-rotor and two-stator topology is proposed. To reduce rotor mass and increase torque density, the proposed SCM-AFPM motor adopts the hybrid permanent magnets (PMs) array with Halbach PMs in the two-terminal rotor and the conventional PMs array in the middle rotor. In addition, a multi-objective optimization model combining response surface method (RSM) and genetic algorithm (GA) is proposed and applied to the proposed SCM-AFPM motor. With the help of the three-dimensional finite-element analysis (3-D FEA), it is found that the torque ripple of the optimized SCM-AFPM motor is 4.73%, while it is 6.21% for the initial motor. Its torque ripple is reduced by 23.8%. Therefore, the proposed multi-objective optimization design method can quickly and reliably obtain the optimal design of the SCM-AFPM motor.

Suggested Citation

  • Changchuang Huang & Baoquan Kou & Xiaokun Zhao & Xu Niu & Lu Zhang, 2022. "Multi-Objective Optimization Design of a Stator Coreless Multidisc Axial Flux Permanent Magnet Motor," Energies, MDPI, vol. 15(13), pages 1-13, June.
    • Handle: RePEc:gam:jeners:v:15:y:2022:i:13:p:4810-:d:852928
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/15/13/4810/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/15/13/4810/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Sheng-Ching Wang & Yu-Cheng Nien & San-Ming Huang, 2022. "Multi-Objective Optimization Design and Analysis of V-Shape Permanent Magnet Synchronous Motor," Energies, MDPI, vol. 15(10), pages 1-16, May.
    2. Ying Xie & Yu Xia & ZhiWei Li & Fei Li, 2019. "Analysis of Modal and Vibration Reduction of an Interior Permanent Magnet Synchronous Motor," Energies, MDPI, vol. 12(18), pages 1-16, September.
    3. Shaopeng Wu & Jinyang Zhou & Xinmiao Zhang & Jiaqiang Yu, 2022. "Design and Research on High Power Density Motor of Integrated Motor Drive System for Electric Vehicles," Energies, MDPI, vol. 15(10), pages 1-23, May.
    4. Andrea Credo & Marco Tursini & Marco Villani & Claudia Di Lodovico & Michele Orlando & Federico Frattari, 2021. "Axial Flux PM In-Wheel Motor for Electric Vehicles: 3D Multiphysics Analysis," Energies, MDPI, vol. 14(8), pages 1-18, April.
    5. Pierpaolo Dini & Sergio Saponara, 2019. "Cogging Torque Reduction in Brushless Motors by a Nonlinear Control Technique," Energies, MDPI, vol. 12(11), pages 1-20, June.
    6. Jean-Michel Grenier & Ramón Pérez & Mathieu Picard & Jérôme Cros, 2021. "Magnetic FEA Direct Optimization of High-Power Density, Halbach Array Permanent Magnet Electric Motors," Energies, MDPI, vol. 14(18), pages 1-19, September.
    7. Stanisław J. Hajnrych & Rafał Jakubowski & Jan Szczypior, 2020. "Yokeless Axial Flux Surface-Mounted Permanent Magnets Machine Rotor Parameters Influence on Torque and Back-Emf," Energies, MDPI, vol. 13(13), pages 1-15, July.
    8. Hongfeng Li & Lifeng Cui & Zigang Ma & Bin Li, 2020. "Multi-Objective Optimization of the Halbach Array Permanent Magnet Spherical Motor Based on Support Vector Machine," Energies, MDPI, vol. 13(21), pages 1-20, October.
    9. Qixu Chen & Guoli Li & Wenping Cao & Zhe Qian & Qunjing Wang, 2021. "Winding MMF and PM MMF Analysis of Axial-Flux Machine with Multi-Phase and Multi-Layer Winding," Energies, MDPI, vol. 14(16), pages 1-21, August.
    10. Shuang Wang & Jianfei Zhao & Tingzhang Liu & Minqi Hua, 2019. "Adaptive Robust Control System for Axial Flux Permanent Magnet Synchronous Motor of Electric Medium Bus Based on Torque Optimal Distribution Method," Energies, MDPI, vol. 12(24), pages 1-17, December.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ryo Yoshida & Jun Kitajima & Takashi Sakae & Mitsuhide Sato & Tsutomu Mizuno & Yuki Shimoda & Akihiro Kubota & Shogo Wada & Teruo Kichiji & Hideo Kumagai, 2022. "Effect of Magnetic Properties of Magnetic Composite Tapes on Motor Losses," Energies, MDPI, vol. 15(21), pages 1-16, October.
    2. Zhaolong Sun & Guangyong Jia & Chuibing Huang & Weichang Zhou & Yinhao Mao & Zhaoran Lei, 2023. "Accurate Modeling and Optimization of Electromagnetic Forces in an Ironless Halbach-Type Permanent Magnet Synchronous Linear Motor," Energies, MDPI, vol. 16(15), pages 1-19, August.
    3. Xiaoyuan Wang & Tianyuan Li & Xiaohong Cui & Xiaoxiao Zhao, 2022. "Design and Analysis of Coreless Axial Flux Permanent Magnet Machine with Novel Composite Structure Coils," Energies, MDPI, vol. 15(14), pages 1-14, July.
    4. Akihisa Hattori & Toshihiko Noguchi & Hiromu Kamiyama, 2022. "High-Torque Density Design of Small Motors for Automotive Applications with Double Axial-Air-Gap Structures," Energies, MDPI, vol. 15(19), pages 1-20, October.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Akihisa Hattori & Toshihiko Noguchi & Hiromu Kamiyama, 2022. "High-Torque Density Design of Small Motors for Automotive Applications with Double Axial-Air-Gap Structures," Energies, MDPI, vol. 15(19), pages 1-20, October.
    2. Yingnan Wang & Chengming Zhang & Chaoyu Zhang & Liyi Li, 2023. "Review of High-Power-Density and Fault-Tolerant Design of Propulsion Motors for Electric Aircraft," Energies, MDPI, vol. 16(19), pages 1-31, October.
    3. Marcel Nicola & Claudiu-Ionel Nicola, 2022. "Improvement of Linear and Nonlinear Control for PMSM Using Computational Intelligence and Reinforcement Learning," Mathematics, MDPI, vol. 10(24), pages 1-34, December.
    4. Pierpaolo Dini & Sergio Saponara, 2020. "Design of an Observer-Based Architecture and Non-Linear Control Algorithm for Cogging Torque Reduction in Synchronous Motors," Energies, MDPI, vol. 13(8), pages 1-20, April.
    5. Aleksey Paramonov & Safarbek Oshurbekov & Vadim Kazakbaev & Vladimir Prakht & Vladimir Dmitrievskii, 2023. "Investigation of the Effect of the Voltage Drop and Cable Length on the Success of Starting the Line-Start Permanent Magnet Motor in the Drive of a Centrifugal Pump Unit," Mathematics, MDPI, vol. 11(3), pages 1-18, January.
    6. Cinzia Bernardeschi & Pierpaolo Dini & Andrea Domenici & Maurizio Palmieri & Sergio Saponara, 2020. "Formal Verification and Co-Simulation in the Design of a Synchronous Motor Control Algorithm," Energies, MDPI, vol. 13(16), pages 1-23, August.
    7. Pierpaolo Dini & Sergio Saponara, 2020. "Design of Adaptive Controller Exploiting Learning Concepts Applied to a BLDC-Based Drive System," Energies, MDPI, vol. 13(10), pages 1-20, May.
    8. Lucian Mihet-Popa & Sergio Saponara, 2021. "Power Converters, Electric Drives and Energy Storage Systems for Electrified Transportation and Smart Grid Applications," Energies, MDPI, vol. 14(14), pages 1-5, July.
    9. João F. P. Fernandes & Pedro P. C. Bhagubai & Paulo J. C. Branco, 2022. "Recent Developments in Electrical Machine Design for the Electrification of Industrial and Transportation Systems," Energies, MDPI, vol. 15(17), pages 1-13, September.
    10. Sameer Madhavan & Raunak Devdatta P B & Edison Gundabattini & Arkadiusz Mystkowski, 2022. "Thermal Analysis and Heat Management Strategies for an Induction Motor, a Review," Energies, MDPI, vol. 15(21), pages 1-20, October.
    11. Xiaoquan Lu & Xinyi He & Ping Jin & Qifeng Huang & Shihai Yang & Mingming Chen, 2021. "General 3D Analytical Method for Eddy-Current Coupling with Halbach Magnet Arrays Based on Magnetic Scalar Potential and H-Functions," Energies, MDPI, vol. 14(24), pages 1-15, December.
    12. Jiongjiong Cai & Peng Ke & Xiao Qu & Zihui Wang, 2022. "Research on the Design of Auxiliary Generator for Enthalpy Reduction and Steady Speed Scroll Expander," Energies, MDPI, vol. 15(9), pages 1-17, April.
    13. Krzysztof Szabat & Tomasz Pajchrowski & Tomasz Tarczewski, 2021. "Modern Electrical Drives: Trends, Problems, and Challenges," Energies, MDPI, vol. 15(1), pages 1-4, December.
    14. Wenich Vattanapuripakorn & Sathapon Sonsupap & Khomson Khannam & Natthakrit Bamrungwong & Prachakon Kaewkhiaw & Jiradanai Sarasamkan & Bopit Bubphachot, 2022. "Advanced Electric Battery Power Storage for Motors through the Use of Differential Gears and High Torque for Recirculating Power Generation," Clean Technol., MDPI, vol. 4(4), pages 1-14, October.
    15. Andrea Credo & Marco Tursini & Marco Villani & Claudia Di Lodovico & Michele Orlando & Federico Frattari, 2021. "Axial Flux PM In-Wheel Motor for Electric Vehicles: 3D Multiphysics Analysis," Energies, MDPI, vol. 14(8), pages 1-18, April.
    16. Chaelim Jeong & Dongho Lee & Jin Hur, 2019. "Mitigation Method of Slot Harmonic Cogging Torque Considering Unevenly Magnetized Permanent Magnets in PMSM," Energies, MDPI, vol. 12(20), pages 1-15, October.
    17. Patxi Gonzalez & Garikoitz Buigues & Angel Javier Mazon, 2023. "Noise in Electric Motors: A Comprehensive Review," Energies, MDPI, vol. 16(14), pages 1-22, July.
    18. Youguang Guo & Lin Liu & Xin Ba & Haiyan Lu & Gang Lei & Wenliang Yin & Jianguo Zhu, 2022. "Measurement and Modeling of Magnetic Materials under 3D Vectorial Magnetization for Electrical Machine Design and Analysis," Energies, MDPI, vol. 16(1), pages 1-11, December.
    19. Ze Jiang & Xiaoyan Huang & Wenping Cao, 2022. "RLS-Based Algorithm for Detecting Partial Demagnetization under Both Stationary and Nonstationary Conditions," Energies, MDPI, vol. 15(10), pages 1-17, May.
    20. Kamila Jankowska & Mateusz Dybkowski, 2021. "A Current Sensor Fault Tolerant Control Strategy for PMSM Drive Systems Based on C ri Markers," Energies, MDPI, vol. 14(12), pages 1-18, June.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:15:y:2022:i:13:p:4810-:d:852928. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.