IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v14y2021i20p6815-d659232.html
   My bibliography  Save this article

RANS CFD Analysis of Hump Formation Mechanism in Double-Suction Centrifugal Pump under Part Load Condition

Author

Listed:
  • Yong Liu

    (School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200240, China)

  • Dezhong Wang

    (School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200240, China)

  • Hongjuan Ran

    (School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200240, China)

  • Rui Xu

    (School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200240, China)

  • Yu Song

    (School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200240, China)

  • Bo Gong

    (School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200240, China)

Abstract

The RANS (Reynolds-averaged Navier–Stokes equations) with CFD (Computational Fluid Dynamics) simulation method is used to analyze the head hump formation mechanism in the double-suction centrifugal pump under a part load condition. The purpose is to establish a clear connection between the head hump and the microcosmic flow field structure, and reveal the influence mechanism between them. It is found that the diffuser stall causes a change in the impeller capacity for work, and this is the most critical reason for hump formation. The change in the hydraulic loss of volute is also a reason for hump, and it is analyzed using the energy balance equation. The hump formation mechanism has not been fully revealed so far. This paper found the most critical flow structure inducing hump and revealed its inducing mechanism, and greatly promoted the understanding of hump formation. The impeller capacity for work is analyzed using torque and rotational speed directly, avoiding large error caused by the Euler head formula, greatly enhancing the accuracy of establishing the connection between the impeller capacity for work and the coherent structure in the flow field under a part load condition. When a pump is running in the hump area, a strong vibration and noise are prone to occur, endangering the pump safety and reliability, and even the pump start and the transition of different working conditions may be interrupted. Revealing the hump formation mechanism provides a key theoretical basis for suppressing hump. Hump problems are widespread in many kinds of pumps, causing a series of troubles and hazards. The analysis method in this paper also provides a reference for other pumps.

Suggested Citation

  • Yong Liu & Dezhong Wang & Hongjuan Ran & Rui Xu & Yu Song & Bo Gong, 2021. "RANS CFD Analysis of Hump Formation Mechanism in Double-Suction Centrifugal Pump under Part Load Condition," Energies, MDPI, vol. 14(20), pages 1-17, October.
  • Handle: RePEc:gam:jeners:v:14:y:2021:i:20:p:6815-:d:659232
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/14/20/6815/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/14/20/6815/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Ortego Sampedro, Egoi & Dazin, Antoine & Colas, Frédéric & Roussette, Olivier & Coutier-Delgosha, Olivier & Caignaert, Guy, 2021. "Multistage radial flow pump - turbine for compressed air energy storage: experimental analysis and modeling," Applied Energy, Elsevier, vol. 289(C).
    2. Li, Deyou & Chang, Hong & Zuo, Zhigang & Wang, Hongjie & Li, Zhenggui & Wei, Xianzhu, 2020. "Experimental investigation of hysteresis on pump performance characteristics of a model pump-turbine with different guide vane openings," Renewable Energy, Elsevier, vol. 149(C), pages 652-663.
    3. Guocheng Lu & Zhigang Zuo & Demin Liu & Shuhong Liu, 2019. "Energy Balance and Local Unsteady Loss Analysis of Flows in a Low Specific Speed Model Pump-Turbine in the Positive Slope Region on the Pump Performance Curve," Energies, MDPI, vol. 12(10), pages 1-22, May.
    4. Ye, Weixiang & Ikuta, Akihiro & Chen, Yining & Miyagawa, Kazuyoshi & Luo, Xianwu, 2020. "Numerical simulation on role of the rotating stall on the hump characteristic in a mixed flow pump using modified partially averaged Navier-Stokes model," Renewable Energy, Elsevier, vol. 166(C), pages 91-107.
    5. Ran, Hongjuan & Liu, Yong & Luo, Xianwu & Shi, Tianjiao & Xu, Yongliang & Chen, Yuanlin & Wang, Dezhong, 2020. "Experimental comparison of two different positive slopes in one single pump turbine," Renewable Energy, Elsevier, vol. 154(C), pages 1218-1228.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Zhao, Yuanqi & Li, Deyou & Chang, Hong & Fu, Xiaolong & Wang, Hongjie & Qin, Daqing, 2023. "Suppression effect of bionic guide vanes with different parameters on the hump characteristics of pump-turbines based on entropy production theory," Energy, Elsevier, vol. 283(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Sun, Longyue & Pan, Qiang & Zhang, Desheng & Zhao, Ruijie & Esch, B.P.M.(Bart) van, 2022. "Numerical study of the energy loss in the bulb tubular pump system focusing on the off-design conditions based on combined energy analysis methods," Energy, Elsevier, vol. 258(C).
    2. Chen, Hao & Wang, Huanran & Li, Ruixiong & Sun, Hao & Ge, Gangqiang & Ling, Lanning, 2022. "Experimental and analytical investigation of near-isothermal pumped hydro-compressed air energy storage system," Energy, Elsevier, vol. 249(C).
    3. Li, Chengchen & Wang, Huanran & He, Xin & Zhang, Yan, 2022. "Experimental and thermodynamic investigation on isothermal performance of large-scaled liquid piston," Energy, Elsevier, vol. 249(C).
    4. Li, Wei & Li, Enda & Ji, Leilei & Zhou, Ling & Shi, Weidong & Zhu, Yong, 2020. "Mechanism and propagation characteristics of rotating stall in a mixed-flow pump," Renewable Energy, Elsevier, vol. 153(C), pages 74-92.
    5. Ji, Leilei & Li, Wei & Shi, Weidong & Tian, Fei & Agarwal, Ramesh, 2021. "Effect of blade thickness on rotating stall of mixed-flow pump using entropy generation analysis," Energy, Elsevier, vol. 236(C).
    6. Lan, Xinyao & Jin, Jiahui & Xu, Beibei & Chen, Diyi & Egusquiza, Mònica & Kim, Jin-Hyuk & Egusquiza, Eduard & Jafar, Nejadali & Xu, Lin & Kuang, Yuan, 2022. "Physical model test and parametric optimization of a hydroelectric generating system with a coaxial shaft surge tank," Renewable Energy, Elsevier, vol. 200(C), pages 880-899.
    7. Ye, Weixiang & Geng, Chen & Luo, Xianwu, 2022. "Unstable flow characteristics in vaneless region with emphasis on the rotor-stator interaction for a pump turbine at pump mode using large runner blade lean," Renewable Energy, Elsevier, vol. 185(C), pages 1343-1361.
    8. Liu, Changchun & Su, Xu & Yin, Zhao & Sheng, Yong & Zhou, Xuezhi & Xu, Yujie & Wang, Xudong & Chen, Haisheng, 2024. "Experimental study on the feasibility of isobaric compressed air energy storage as wind power side energy storage," Applied Energy, Elsevier, vol. 364(C).
    9. Li, Deyou & Qin, Yonglin & Wang, Jianpeng & Zhu, Yutong & Wang, Hongjie & Wei, Xianzhu, 2022. "Optimization of blade high-pressure edge to reduce pressure fluctuations in pump-turbine hump region," Renewable Energy, Elsevier, vol. 181(C), pages 24-38.
    10. Zhang, Yufei & Li, Ruixiong & Shao, Huaishuang & He, Xin & Zhang, Wenlong & Du, Junyu & Song, Yaoguang & Wang, Huanran, 2024. "Thermodynamic and economic analysis of a novel thermoelectric-hydrogen co-generation system combining compressed air energy storage and chemical energy," Energy, Elsevier, vol. 286(C).
    11. Sergey Skripkin & Zhigang Zuo & Mikhail Tsoy & Pavel Kuibin & Shuhong Liu, 2022. "Oscillation of Cavitating Vortices in Draft Tubes of a Simplified Model Turbine and a Model Pump–Turbine," Energies, MDPI, vol. 15(8), pages 1-18, April.
    12. Ye, Weixiang & Ikuta, Akihiro & Chen, Yining & Miyagawa, Kazuyoshi & Luo, Xianwu, 2020. "Numerical simulation on role of the rotating stall on the hump characteristic in a mixed flow pump using modified partially averaged Navier-Stokes model," Renewable Energy, Elsevier, vol. 166(C), pages 91-107.
    13. Luo, Xianwu & Ye, Weixiang & Huang, Renfang & Wang, Yiwei & Du, Tezhuan & Huang, Chenguang, 2020. "Numerical investigations of the energy performance and pressure fluctuations for a waterjet pump in a non-uniform inflow," Renewable Energy, Elsevier, vol. 153(C), pages 1042-1052.
    14. Yonglin Qin & Deyou Li & Hongjie Wang & Xianzhu Wei, 2023. "Optimization of Setting Angle Distribution to Suppress Hump Characteristic in Pump Turbine," Energies, MDPI, vol. 16(5), pages 1-18, March.
    15. Zhao, Yuanqi & Li, Deyou & Chang, Hong & Fu, Xiaolong & Wang, Hongjie & Qin, Daqing, 2023. "Suppression effect of bionic guide vanes with different parameters on the hump characteristics of pump-turbines based on entropy production theory," Energy, Elsevier, vol. 283(C).
    16. Yang, Biao & Li, Deyou & Fu, Xiaolong & Wang, Hongjie & Gong, Ruzhi, 2024. "Energy and exergy analysis of a novel pumped hydro compressed air energy storage system," Energy, Elsevier, vol. 294(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:14:y:2021:i:20:p:6815-:d:659232. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.