IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v311y2024ics0360544224032365.html
   My bibliography  Save this article

Evolution mechanism of internal flow in the hump region and hump optimization of axial-flow reactor coolant pump

Author

Listed:
  • Chen, Huazheng
  • Liu, Xiangsong
  • Lu, Yonggang
  • Fu, Qiang
  • Zhu, Rongsheng
  • Li, Huairui
  • Su, Haonan

Abstract

The Nuclear Reactor Coolant Pump (RCP) serves as a pivotal equipment in nuclear power plants, and its operational reliability is directly linked to the overall safety of the plant. When operating in the hump region, axial-flow reactor coolant pumps inevitably experience significant vibration and noise. Therefore, it is necessary to study the internal flow characteristics in the hump region to achieve effective control and increase the hump margin, keeping it away from the normal operating region. This study conducted analyses of pressure pulsation characteristics under various flow rates through experimentation. Additionally, numerical simulations were employed to scrutinize the internal flow of the pump under corresponding flow rates. Research has found that the disturbance of intermediate frequency signals is the main reason for the increase in pressure fluctuations in the hump region, rooted in the annular flow at the impeller inlet and vortex phenomena in the flow channel. Subsequently, the performance of the hump region was improved by optimizing the design of the vane inlet attack angle. The conclusions drawn from this study provide insights and a foundation for the optimal design of reactor coolant pumps.

Suggested Citation

  • Chen, Huazheng & Liu, Xiangsong & Lu, Yonggang & Fu, Qiang & Zhu, Rongsheng & Li, Huairui & Su, Haonan, 2024. "Evolution mechanism of internal flow in the hump region and hump optimization of axial-flow reactor coolant pump," Energy, Elsevier, vol. 311(C).
    • Handle: RePEc:eee:energy:v:311:y:2024:i:c:s0360544224032365
    DOI: 10.1016/j.energy.2024.133460
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544224032365
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2024.133460?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Yang, Gang & Shen, Xi & Pan, Qiang & Geng, Linlin & Shi, Lei & Xu, Bin & Zhang, Desheng, 2024. "Investigation on passive suppression method of hump characteristics in a large vertical volute centrifugal pump: Using combined diffuser vane structure," Energy, Elsevier, vol. 304(C).
    2. Zhang, Ning & Liu, Xiaokai & Gao, Bo & Xia, Bin, 2019. "DDES analysis of the unsteady wake flow and its evolution of a centrifugal pump," Renewable Energy, Elsevier, vol. 141(C), pages 570-582.
    3. Wenpeng Zhang & Fangping Tang & Lijian Shi & Qiujin Hu & Ying Zhou, 2020. "Effects of an Inlet Vortex on the Performance of an Axial-Flow Pump," Energies, MDPI, vol. 13(11), pages 1-23, June.
    4. Mulu, B.G. & Jonsson, P.P. & Cervantes, M.J., 2012. "Experimental investigation of a Kaplan draft tube – Part I: Best efficiency point," Applied Energy, Elsevier, vol. 93(C), pages 695-706.
    5. Yonglin Qin & Deyou Li & Hongjie Wang & Xianzhu Wei, 2023. "Optimization of Setting Angle Distribution to Suppress Hump Characteristic in Pump Turbine," Energies, MDPI, vol. 16(5), pages 1-18, March.
    6. Ye, Weixiang & Ikuta, Akihiro & Chen, Yining & Miyagawa, Kazuyoshi & Luo, Xianwu, 2020. "Numerical simulation on role of the rotating stall on the hump characteristic in a mixed flow pump using modified partially averaged Navier-Stokes model," Renewable Energy, Elsevier, vol. 166(C), pages 91-107.
    7. Xu, Lianchen & Kan, Kan & Zheng, Yuan & Liu, Demin & Binama, Maxime & Xu, Zhe & Yan, Xiaotong & Guo, Mengqi & Chen, Huixiang, 2024. "Rotating stall mechanism of pump-turbine in hump region: An insight into vortex evolution," Energy, Elsevier, vol. 292(C).
    8. Ni, Dan & Zhang, Ning & Gao, Bo & Li, Zhong & Yang, Minguan, 2020. "Dynamic measurements on unsteady pressure pulsations and flow distributions in a nuclear reactor coolant pump," Energy, Elsevier, vol. 198(C).
    9. Ji, Leilei & Li, Wei & Shi, Weidong & Chang, Hao & Yang, Zhenyu, 2020. "Energy characteristics of mixed-flow pump under different tip clearances based on entropy production analysis," Energy, Elsevier, vol. 199(C).
    10. Abazariyan, Sina & Rafee, Roohollah & Derakhshan, Shahram, 2018. "Experimental study of viscosity effects on a pump as turbine performance," Renewable Energy, Elsevier, vol. 127(C), pages 539-547.
    11. Yang, Gang & Shen, Xi & Shi, Lei & Zhang, Desheng & Zhao, Xutao & (Bart) van Esch, B.P.M., 2023. "Numerical investigation of hump characteristic improvement in a large vertical centrifugal pump with special emphasis on energy loss mechanism," Energy, Elsevier, vol. 273(C).
    12. Li, Deyou & Qin, Yonglin & Wang, Jianpeng & Zhu, Yutong & Wang, Hongjie & Wei, Xianzhu, 2022. "Optimization of blade high-pressure edge to reduce pressure fluctuations in pump-turbine hump region," Renewable Energy, Elsevier, vol. 181(C), pages 24-38.
    13. Yu, Zhi-Feng & Wang, Wen-Quan & Yan, Yan & Liu, Xing-Shun, 2021. "Energy loss evaluation in a Francis turbine under overall operating conditions using entropy production method," Renewable Energy, Elsevier, vol. 169(C), pages 982-999.
    14. Yong Liu & Dezhong Wang & Hongjuan Ran & Rui Xu & Yu Song & Bo Gong, 2021. "RANS CFD Analysis of Hump Formation Mechanism in Double-Suction Centrifugal Pump under Part Load Condition," Energies, MDPI, vol. 14(20), pages 1-17, October.
    15. Zhong Li & Yanna Sun & Weifeng Gong & Dan Ni & Bo Gao, 2024. "Analysis of Energy Loss Characteristics in an Axial-Flow Reactor Coolant Pump Based on Entropy Production Theory," Energies, MDPI, vol. 17(14), pages 1-18, July.
    16. Ohiemi, Israel Enema & Sunsheng, Yang & Singh, Punit & Li, Yanjun & Osman, Fareed, 2023. "Evaluation of energy loss in a low-head axial flow turbine under different blade numbers using entropy production method," Energy, Elsevier, vol. 274(C).
    17. Li, Huichuang & Yang, Jiahang & Zhang, Wenwu & Hu, Liwei & Liang, Ao & Yao, Zhifeng, 2024. "Energy performance and unsteady gas-liquid flow characteristics of a multiphase rotodynamic pump: An experiment," Applied Energy, Elsevier, vol. 375(C).
    18. Sun, Chuanwang & Zhan, Yanhong & Gao, Xiang, 2023. "Does environmental regulation increase domestic value-added in exports? An empirical study of cleaner production standards in China," World Development, Elsevier, vol. 163(C).
    19. Xin Chen & Shiyang Li & Dazhuan Wu & Shuai Yang & Peng Wu, 2020. "Effect of Suction and Discharge Conditions on the Unsteady Flow Phenomena of Axial-Flow Reactor Coolant Pump," Energies, MDPI, vol. 13(7), pages 1-25, April.
    20. Liu, Yabin & Tan, Lei, 2018. "Tip clearance on pressure fluctuation intensity and vortex characteristic of a mixed flow pump as turbine at pump mode," Renewable Energy, Elsevier, vol. 129(PA), pages 606-615.
    21. Shi, Lijian & Yuan, Yao & Jiao, Haifeng & Tang, Fangping & Cheng, Li & Yang, Fan & Jin, Yan & Zhu, Jun, 2021. "Numerical investigation and experiment on pressure pulsation characteristics in a full tubular pump," Renewable Energy, Elsevier, vol. 163(C), pages 987-1000.
    22. Mu, Tong & Zhang, Rui & Xu, Hui & Fei, Zhaodan & Feng, Jiangang & Jin, Yan & Zheng, Yuan, 2023. "Improvement of energy performance of the axial-flow pump by groove flow control technology based on the entropy theory," Energy, Elsevier, vol. 274(C).
    23. Luqman, Muhammad & Ahmad, Najid & Bakhsh, Khuda, 2019. "Nuclear energy, renewable energy and economic growth in Pakistan: Evidence from non-linear autoregressive distributed lag model," Renewable Energy, Elsevier, vol. 139(C), pages 1299-1309.
    24. Deyou, Li & Hongjie, Wang & Gaoming, Xiang & Ruzhi, Gong & Xianzhu, Wei & Zhansheng, Liu, 2015. "Unsteady simulation and analysis for hump characteristics of a pump turbine model," Renewable Energy, Elsevier, vol. 77(C), pages 32-42.
    25. Zhao, Yuanqi & Li, Deyou & Chang, Hong & Fu, Xiaolong & Wang, Hongjie & Qin, Daqing, 2023. "Suppression effect of bionic guide vanes with different parameters on the hump characteristics of pump-turbines based on entropy production theory," Energy, Elsevier, vol. 283(C).
    26. Jonsson, P.P. & Mulu, B.G. & Cervantes, M.J., 2012. "Experimental investigation of a Kaplan draft tube – Part II: Off-design conditions," Applied Energy, Elsevier, vol. 94(C), pages 71-83.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ni, Dan & Zhang, Ning & Gao, Bo & Li, Zhong & Yang, Minguan, 2020. "Dynamic measurements on unsteady pressure pulsations and flow distributions in a nuclear reactor coolant pump," Energy, Elsevier, vol. 198(C).
    2. Li, Wei & Long, Yu & Ji, Leilei & Li, Haoming & Li, Shuo & Chen, Yunfei & Yang, Qiaoyue, 2024. "Effect of circumferential spokes on the rotating stall flow field of mixed-flow pump," Energy, Elsevier, vol. 290(C).
    3. Chengshuo Wu & Jun Yang & Shuai Yang & Peng Wu & Bin Huang & Dazhuan Wu, 2023. "A Review of Fluid-Induced Excitations in Centrifugal Pumps," Mathematics, MDPI, vol. 11(4), pages 1-20, February.
    4. Yan, Tianxu & Qiu, Baoyun & Qi, Guipeng & Yang, Jiale, 2024. "Energy-saving mechanism and dynamic characteristics of blade angle adjustment in low head pumping system," Energy, Elsevier, vol. 311(C).
    5. Pei, Ji & Shen, Jiawei & Wang, Wenjie & Yuan, Shouqi & Zhao, Jiantao, 2024. "Evaluating hydraulic dissipation in a reversible mixed-flow pump for micro-pumped hydro storage based on entropy production theory," Renewable Energy, Elsevier, vol. 225(C).
    6. Jin, Faye & Luo, Yongyao & Zhao, Qiang & Cao, Jiali & Wang, Zhengwei, 2023. "Energy loss analysis of transition simulation for a prototype reversible pump turbine during load rejection process," Energy, Elsevier, vol. 284(C).
    7. Wang, Chaoyue & Wang, Benhong & Wang, Fujun & Wang, Hao & Hong, Yiping & Wu, Jie & Li, Dianji & Shao, Chunbing, 2024. "On the scale effect of energy conversion in large-scale bulb tubular pump: Characteristics, mechanisms and applications," Energy, Elsevier, vol. 292(C).
    8. Yang, Gang & Shen, Xi & Pan, Qiang & Geng, Linlin & Shi, Lei & Xu, Bin & Zhang, Desheng, 2024. "Investigation on passive suppression method of hump characteristics in a large vertical volute centrifugal pump: Using combined diffuser vane structure," Energy, Elsevier, vol. 304(C).
    9. Zhao, Yuanqi & Li, Deyou & Chang, Hong & Fu, Xiaolong & Wang, Hongjie & Qin, Daqing, 2023. "Suppression effect of bionic guide vanes with different parameters on the hump characteristics of pump-turbines based on entropy production theory," Energy, Elsevier, vol. 283(C).
    10. Kan, Kan & Zhang, Qingying & Xu, Zhe & Zheng, Yuan & Gao, Qiang & Shen, Lian, 2022. "Energy loss mechanism due to tip leakage flow of axial flow pump as turbine under various operating conditions," Energy, Elsevier, vol. 255(C).
    11. Lai, Xi-De & Liang, Quan-Wei & Ye, Dao-Xing & Chen, Xiao-Ming & Xia, Mi-Mi, 2019. "Experimental investigation of flows inside draft tube of a high-head pump-turbine," Renewable Energy, Elsevier, vol. 133(C), pages 731-742.
    12. Dan Ni & Feifan Wang & Bo Gao & Yang Zhang & Shiyuan Huang, 2022. "Experimental Investigation on the Effect of the Staggered Impeller on the Unsteady Pressure Pulsations Characteristic in a Pump," Energies, MDPI, vol. 15(23), pages 1-15, November.
    13. He, Jiawei & Si, Qiaorui & Sun, Wentao & Liu, Jinfeng & Miao, Senchun & Wang, Xiaohui & Wang, Peng & Wang, Chenguang, 2023. "Study on the energy loss characteristics of ultra-low specific speed PAT under different short blade lengths based on entropy production method," Energy, Elsevier, vol. 283(C).
    14. Guo, Bao & Xiao, Yexiang & Rai, Anant Kumar & Zhang, Jin & Liang, Quanwei, 2020. "Sediment-laden flow and erosion modeling in a Pelton turbine injector," Renewable Energy, Elsevier, vol. 162(C), pages 30-42.
    15. Ji, Leilei & Li, Wei & Shi, Weidong & Tian, Fei & Agarwal, Ramesh, 2021. "Effect of blade thickness on rotating stall of mixed-flow pump using entropy generation analysis," Energy, Elsevier, vol. 236(C).
    16. Zhao, Jiantao & Pei, Ji & Wang, Wenjie & Gan, Xingcheng, 2024. "Blade redesign based on inverse design method for energy performance improvement and hydro-induced vibration suppression of a multi-stage centrifugal pump," Energy, Elsevier, vol. 308(C).
    17. Kan, Kan & Binama, Maxime & Chen, Huixiang & Zheng, Yuan & Zhou, Daqing & Su, Wentao & Muhirwa, Alexis, 2022. "Pump as turbine cavitation performance for both conventional and reverse operating modes: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 168(C).
    18. Ye, Weixiang & Geng, Chen & Luo, Xianwu, 2022. "Unstable flow characteristics in vaneless region with emphasis on the rotor-stator interaction for a pump turbine at pump mode using large runner blade lean," Renewable Energy, Elsevier, vol. 185(C), pages 1343-1361.
    19. Zhenhua Zhou & Huacong Li & Jinbo Chen & Delin Li & Ning Zhang, 2023. "Numerical Simulation on Transient Pressure Pulsations and Complex Flow Structures of a Ultra-High-Speed Centrifugal Pump at Stalled Condition," Energies, MDPI, vol. 16(11), pages 1-17, June.
    20. Hongbo Zhao & Xiangkai Zhou & Long Meng & Xuejin Zhu & Chengqi Mou & Peijian Zhou, 2024. "Advances in Flow Control Methods for Pump-Stall Suppression: Passive and Active Approaches," Energies, MDPI, vol. 17(23), pages 1-22, December.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:311:y:2024:i:c:s0360544224032365. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.