IDEAS home Printed from https://ideas.repec.org/a/eee/streco/v52y2020icp174-183.html
   My bibliography  Save this article

The differential role of manufacturing and non-manufacturing TFP growth in economic growth

Author

Listed:
  • Jia, Fei
  • Ma, Xiuying
  • Xu, Xiangyun
  • Xie, Lijuan

Abstract

Applying the methods of growth accounting decomposition and econometric regressions to a sample of developed economies over the period of 1970–2011, this study examines the differential role of manufacturing TFP growth and non-manufacturing TFP growth in the long-run economic growth by affecting aggregate TFP growth and by influencing capital and labour input growth. The results show that manufacturing TFP growth contributes to economic growth directly but also through the contributions of capital input growth and labour input growth indirectly. In contrast, such direct and indirect effects are not observed for non-manufacturing TFP growth. The findings suggest that despite the declining share of manufacturing in GDP, maintaining the growth of manufacturing TFP is critical for economic growth. The study provides a useful explanation of why many developed economies have started to engage in ‘reindustrialization’ strategy after the global financial crisis in 2008 and carries important policy implications.

Suggested Citation

  • Jia, Fei & Ma, Xiuying & Xu, Xiangyun & Xie, Lijuan, 2020. "The differential role of manufacturing and non-manufacturing TFP growth in economic growth," Structural Change and Economic Dynamics, Elsevier, vol. 52(C), pages 174-183.
  • Handle: RePEc:eee:streco:v:52:y:2020:i:c:p:174-183
    DOI: 10.1016/j.strueco.2019.10.006
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0954349X19301110
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.strueco.2019.10.006?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Loayza, Norman V. & Ranciere, Romain, 2006. "Financial Development, Financial Fragility, and Growth," Journal of Money, Credit and Banking, Blackwell Publishing, vol. 38(4), pages 1051-1076, June.
    2. Oulton, Nicholas, 2001. "Must the Growth Rate Decline? Baumol's Unbalanced Growth Revisited," Oxford Economic Papers, Oxford University Press, vol. 53(4), pages 605-627, October.
    3. Philippe Aghion & Peter Howitt & Susanne Prantl, 2015. "Patent rights, product market reforms, and innovation," Journal of Economic Growth, Springer, vol. 20(3), pages 223-262, September.
    4. Berger, Allen N. & Bouwman, Christa H.S., 2013. "How does capital affect bank performance during financial crises?," Journal of Financial Economics, Elsevier, vol. 109(1), pages 146-176.
    5. Vandermerwe, Sandra & Rada, Juan, 1988. "Servitization of business: Adding value by adding services," European Management Journal, Elsevier, vol. 6(4), pages 314-324, December.
    6. Dale Jorgenson & Mun Ho & Jon Samuels & Kevin Stiroh, 2007. "Industry Origins of the American Productivity Resurgence," Economic Systems Research, Taylor & Francis Journals, vol. 19(3), pages 229-252.
    7. Margarida Duarte & Diego Restuccia, 2010. "The Role of the Structural Transformation in Aggregate Productivity," The Quarterly Journal of Economics, President and Fellows of Harvard College, vol. 125(1), pages 129-173.
    8. Conti, Maurizio & Sulis, Giovanni, 2016. "Human capital, employment protection and growth in Europe," Journal of Comparative Economics, Elsevier, vol. 44(2), pages 213-230.
    9. Maroto-Sánchez, Andrés & Cuadrado-Roura, Juan R., 2009. "Is growth of services an obstacle to productivity growth? A comparative analysis," Structural Change and Economic Dynamics, Elsevier, vol. 20(4), pages 254-265, December.
    10. Alessio Moro, 2012. "The Structural Transformation Between Manufacturing and Services and the Decline in the US GDP Volatility," Review of Economic Dynamics, Elsevier for the Society for Economic Dynamics, vol. 15(3), pages 402-415, July.
    11. Bun, Maurice J. G. & Kiviet, Jan F., 2003. "On the diminishing returns of higher-order terms in asymptotic expansions of bias," Economics Letters, Elsevier, vol. 79(2), pages 145-152, May.
    12. Carol Corrado & Jonathan Haskel & Cecilia Jona-Lasinio, 2017. "Knowledge Spillovers, ICT and Productivity Growth," Oxford Bulletin of Economics and Statistics, Department of Economics, University of Oxford, vol. 79(4), pages 592-618, August.
    13. Smil, Vaclav, 2013. "Made in the USA," MIT Press Books, The MIT Press, edition 1, volume 1, number 0262019388, April.
    14. Hartwig, Jochen, 2012. "Testing the growth effects of structural change," Structural Change and Economic Dynamics, Elsevier, vol. 23(1), pages 11-24.
    15. Carl E. Walsh, 2010. "Monetary Theory and Policy, Third Edition," MIT Press Books, The MIT Press, edition 3, volume 1, number 0262013770, April.
    16. Ilzetzki, Ethan & Mendoza, Enrique G. & Végh, Carlos A., 2013. "How big (small?) are fiscal multipliers?," Journal of Monetary Economics, Elsevier, vol. 60(2), pages 239-254.
    17. Mary O'Mahony & Marcel P. Timmer, 2009. "Output, Input and Productivity Measures at the Industry Level: The EU KLEMS Database," Economic Journal, Royal Economic Society, vol. 119(538), pages 374-403, June.
    18. Dimopoulos, Theodosios & Sacchetto, Stefano, 2016. "Technological heterogeneity and corporate investment," Journal of Economic Dynamics and Control, Elsevier, vol. 66(C), pages 20-35.
    19. Kiviet, Jan F., 1995. "On bias, inconsistency, and efficiency of various estimators in dynamic panel data models," Journal of Econometrics, Elsevier, vol. 68(1), pages 53-78, July.
    20. Olley, G Steven & Pakes, Ariel, 1996. "The Dynamics of Productivity in the Telecommunications Equipment Industry," Econometrica, Econometric Society, vol. 64(6), pages 1263-1297, November.
    21. Ross Levine & Norman Loayza & Thorsten Beck, 2002. "Financial Intermediation and Growth: Causality and Causes," Central Banking, Analysis, and Economic Policies Book Series, in: Leonardo Hernández & Klaus Schmidt-Hebbel & Norman Loayza (Series Editor) & Klaus Schmidt-Hebbel (Se (ed.),Banking, Financial Integration, and International Crises, edition 1, volume 3, chapter 2, pages 031-084, Central Bank of Chile.
    22. Szirmai, Adam & Verspagen, Bart, 2015. "Manufacturing and economic growth in developing countries, 1950–2005," Structural Change and Economic Dynamics, Elsevier, vol. 34(C), pages 46-59.
    23. Nordhaus William D, 2008. "Baumol's Diseases: A Macroeconomic Perspective," The B.E. Journal of Macroeconomics, De Gruyter, vol. 8(1), pages 1-39, February.
    24. Fernández, Rafael & Palazuelos, Enrique, 2018. "Measuring the role of manufacturing in the productivity growth of the European economies (1993–2007)," Structural Change and Economic Dynamics, Elsevier, vol. 46(C), pages 1-12.
    25. Andrew B. Bernard & Valerie Smeets & Frederic Warzynski, 2017. "Rethinking deindustrialization," Economic Policy, CEPR, CESifo, Sciences Po;CES;MSH, vol. 32(89), pages 5-38.
    26. Theodosios Dimopoulos & Stefano Sacchetto, "undated". "Technological Heterogeneity and Corporate Investment," GSIA Working Papers 2012-E48, Carnegie Mellon University, Tepper School of Business.
    27. Roberto Samaniego & Juliana Sun, 2016. "Productivity Growth and Structural Transformation," Review of Economic Dynamics, Elsevier for the Society for Economic Dynamics, vol. 21, pages 266-285, July.
    28. Coad, Alex & Vezzani, Antonio, 2019. "Three cheers for industry: Is manufacturing linked to R&D, exports, and productivity growth?," Structural Change and Economic Dynamics, Elsevier, vol. 50(C), pages 14-25.
    29. Herrendorf, Berthold & Rogerson, Richard & Valentinyi, Ákos, 2014. "Growth and Structural Transformation," Handbook of Economic Growth, in: Philippe Aghion & Steven Durlauf (ed.), Handbook of Economic Growth, edition 1, volume 2, chapter 6, pages 855-941, Elsevier.
    30. Szirmai, Adam, 2012. "Industrialisation as an engine of growth in developing countries, 1950–2005," Structural Change and Economic Dynamics, Elsevier, vol. 23(4), pages 406-420.
    31. Robert E. Hall & Charles I. Jones, 1999. "Why do Some Countries Produce So Much More Output Per Worker than Others?," The Quarterly Journal of Economics, President and Fellows of Harvard College, vol. 114(1), pages 83-116.
    32. Cornett, Marcia Millon & McNutt, Jamie John & Strahan, Philip E. & Tehranian, Hassan, 2011. "Liquidity risk management and credit supply in the financial crisis," Journal of Financial Economics, Elsevier, vol. 101(2), pages 297-312, August.
    33. Justin R. Pierce & Peter K. Schott, 2016. "The Surprisingly Swift Decline of US Manufacturing Employment," American Economic Review, American Economic Association, vol. 106(7), pages 1632-1662, July.
    34. Cantore, Nicola & Clara, Michele & Lavopa, Alejandro & Soare, Camelia, 2017. "Manufacturing as an engine of growth: Which is the best fuel?," Structural Change and Economic Dynamics, Elsevier, vol. 42(C), pages 56-66.
    35. Neusser, Klaus, 2008. "Interdependencies of US manufacturing sectoral TFPs: A spatial VAR approach," Journal of Macroeconomics, Elsevier, vol. 30(3), pages 991-1004, September.
    36. Lavopa, Alejandro & Szirmai, Adam, 2018. "Structural modernisation and development traps. An empirical approach," World Development, Elsevier, vol. 112(C), pages 59-73.
    37. Ilyina, Anna & Samaniego, Roberto, 2012. "Structural change and financing constraints," Journal of Monetary Economics, Elsevier, vol. 59(2), pages 166-179.
    38. Schettkat, Ronald & Yocarini, Lara, 2006. "The shift to services employment: A review of the literature," Structural Change and Economic Dynamics, Elsevier, vol. 17(2), pages 127-147, June.
    39. Giovanni S. F. Bruno, 2005. "Estimation and inference in dynamic unbalanced panel-data models with a small number of individuals," Stata Journal, StataCorp LP, vol. 5(4), pages 473-500, December.
    40. Dale W. Jorgenson & Mun S. Ho & Jon D. Samuels, 2012. "Information Technology and US Productivity Growth: Evidence from a Prototype Industry Production Account," Chapters, in: Matilde Mas & Robert Stehrer (ed.), Industrial Productivity in Europe, chapter 2, Edward Elgar Publishing.
    41. Jochen Hartwig, 2011. "Testing The Baumol–Nordhaus Model With Eu Klems Data," Review of Income and Wealth, International Association for Research in Income and Wealth, vol. 57(3), pages 471-489, September.
    42. John Haltiwanger, 1997. "Measuring and analyzing aggregate fluctuations: the importance of building from microeconomic evidence," Review, Federal Reserve Bank of St. Louis, issue May, pages 55-78.
    43. Robert Inklaar & Marcel P. Timmer & Bart van Ark, 2008. "Market services productivity across Europe and the US [‘Distance to Frontier, Selection, and Economic Growth’]," Economic Policy, CEPR, CESifo, Sciences Po;CES;MSH, vol. 23(53), pages 140-194.
    44. Giovanni Dosi, 2000. "Sources, Procedures, and Microeconomic Effects of Innovation," Chapters, in: Innovation, Organization and Economic Dynamics, chapter 2, pages 63-114, Edward Elgar Publishing.
    45. van Neuss, Leif, 2018. "Globalization and deindustrialization in advanced countries," Structural Change and Economic Dynamics, Elsevier, vol. 45(C), pages 49-63.
    46. Nickell, Stephen J, 1981. "Biases in Dynamic Models with Fixed Effects," Econometrica, Econometric Society, vol. 49(6), pages 1417-1426, November.
    47. Dani Rodrik, 2013. "Unconditional Convergence in Manufacturing," The Quarterly Journal of Economics, President and Fellows of Harvard College, vol. 128(1), pages 165-204.
    48. Viral V Acharya & Philipp Schnabl, 2010. "Do Global Banks Spread Global Imbalances? Asset-Backed Commercial Paper during the Financial Crisis of 2007–09," IMF Economic Review, Palgrave Macmillan;International Monetary Fund, vol. 58(1), pages 37-73, August.
    49. Chen, Kaiji & Wemy, Edouard, 2015. "Investment-specific technological changes: The source of long-run TFP fluctuations," European Economic Review, Elsevier, vol. 80(C), pages 230-252.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Clara Inés Pardo Martínez & Alexander Cotte Poveda, 2022. "The effects of environmental performance on competitiveness and innovation: a stochastic frontier approach for Colombia," Environment Systems and Decisions, Springer, vol. 42(1), pages 51-62, March.
    2. Bin Amin, Sakib & Taghizadeh-Hesary, Farhad & Khan, Farhan & Manal Rahman, Faria, 2024. "Does technology have a lead or lag role in economic growth? The case of selected resource-rich and resource-scarce countries," Resources Policy, Elsevier, vol. 89(C).
    3. Lavopa, Alejandro & Donnelly, Carolina, 2023. "Socioeconomic resilience during the COVID-19 pandemic. The role of industrial capabilities," Structural Change and Economic Dynamics, Elsevier, vol. 67(C), pages 44-57.
    4. Xiuying Ma & Fei Jia & Hong Jiang & Xiangyun Xu, 2022. "The Impact of Non-R&D Intangible Capital on TFP Growth: Evidence from Multi-country Industry Level Data," Journal of the Knowledge Economy, Springer;Portland International Center for Management of Engineering and Technology (PICMET), vol. 13(4), pages 2890-2910, December.
    5. Zufeng Shang & Fenglai Wang & Xu Yang, 2022. "The Efficiency of the Chinese Prefabricated Building Industry and Its Influencing Factors: An Empirical Study," Sustainability, MDPI, vol. 14(17), pages 1-25, August.
    6. Ma, Dan & Zhu, Qing, 2022. "Innovation in emerging economies: Research on the digital economy driving high-quality green development," Journal of Business Research, Elsevier, vol. 145(C), pages 801-813.
    7. Ren, Xiaohang & Zhang, Xiao & Yan, Cheng & Gozgor, Giray, 2022. "Climate policy uncertainty and firm-level total factor productivity: Evidence from China," Energy Economics, Elsevier, vol. 113(C).
    8. Khan, Irfan & Hou, Fujun & Le, Hoang Phong & Ali, Syed Ahtsham, 2021. "Do natural resources, urbanization, and value-adding manufacturing affect environmental quality? Evidence from the top ten manufacturing countries," Resources Policy, Elsevier, vol. 72(C).
    9. Ronzon, Tévécia & Iost, Susanne & Philippidis, George, 2022. "An output-based measurement of EU bioeconomy services: Marrying statistics with policy insight," Structural Change and Economic Dynamics, Elsevier, vol. 60(C), pages 290-301.
    10. Yonghong Ma & Huili Ni & Xiaomeng Yang & Lingkai Kong & Chunmei Liu, 2023. "Government subsidies and total factor productivity of enterprises: a life cycle perspective," Economia Politica: Journal of Analytical and Institutional Economics, Springer;Fondazione Edison, vol. 40(1), pages 153-188, April.
    11. Meijuan Wang & Donghua Yu & Haiqian Chen & Yang Li, 2022. "Comprehensive Measurement, Spatiotemporal Evolution, and Spatial Correlation Analysis of High-Quality Development in the Manufacturing Industry," Sustainability, MDPI, vol. 14(10), pages 1-19, May.
    12. Maliyamu Abudureheman & Qingzhe Jiang & Jiong Gong & Abulaiti Yiming, 2023. "Estimating and Decomposing the TFP Growth of Service-Oriented Manufacturing in China: A Translogarithmic Stochastic Frontier Approach," Sustainability, MDPI, vol. 15(7), pages 1-20, March.
    13. Gao, Peng & He, Ling & Hu, Shiyang & Xin, Qingquan, 2024. "Double-edged sword: Does strong creditor protection in the bankruptcy process affect firm productivity," International Review of Financial Analysis, Elsevier, vol. 95(PA).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Peter Bauer & Igor Fedotenkov & Aurelien Genty & Issam Hallak & Peter Harasztosi & David Martinez Turegano & David Nguyen & Nadir Preziosi & Ana Rincon-Aznar & Miguel Sanchez Martinez, 2020. "Productivity in Europe: Trends and drivers in a service-based economy," JRC Research Reports JRC119785, Joint Research Centre.
    2. Alex Coad & Antonio Vezzani, 2017. "Manufacturing the future: is the manufacturing sector a driver of R&D, exports and productivity growth?," JRC Working Papers on Corporate R&D and Innovation 2017-06, Joint Research Centre.
    3. Kim, Bae-Geun, 2023. "Technological advances in manufacturing and their effects on sectoral employment in the Korean economy," Economic Modelling, Elsevier, vol. 126(C).
    4. Coad, Alex & Vezzani, Antonio, 2019. "Three cheers for industry: Is manufacturing linked to R&D, exports, and productivity growth?," Structural Change and Economic Dynamics, Elsevier, vol. 50(C), pages 14-25.
    5. Vu, Khuong & Haraguchi, Nobuya & Amann, Juergen, 2021. "Deindustrialization in developed countries amid accelerated globalization: Patterns, influencers, and policy insights," Structural Change and Economic Dynamics, Elsevier, vol. 59(C), pages 454-469.
    6. Sen, Ali, 2020. "Structural change within the services sector, Baumol's cost disease, and cross-country productivity differences," MPRA Paper 99614, University Library of Munich, Germany.
    7. Eicher, Theo S. & Schreiber, Till, 2010. "Structural policies and growth: Time series evidence from a natural experiment," Journal of Development Economics, Elsevier, vol. 91(1), pages 169-179, January.
    8. Grundmann, Rainer & Gries, Thomas, 2015. "Crucial for Modern Sector Development? The Role of Exports and Institutions in Developing Countries," VfS Annual Conference 2015 (Muenster): Economic Development - Theory and Policy 112962, Verein für Socialpolitik / German Economic Association.
    9. Riccardo Pariboni & Pasquale Tridico, 2020. "Structural change, institutions and the dynamics of labor productivity in Europe," Journal of Evolutionary Economics, Springer, vol. 30(5), pages 1275-1300, November.
    10. Hartwig, Jochen, 2015. "Structural change, aggregate demand and employment dynamics in the OECD, 1970–2010," Structural Change and Economic Dynamics, Elsevier, vol. 34(C), pages 36-45.
    11. Teimouri, Sheida & Zietz, Joachim, 2020. "Coping with deindustrialization: A panel study for early OECD countries," Structural Change and Economic Dynamics, Elsevier, vol. 54(C), pages 26-41.
    12. Han, Minsoo & Pyun, Ju Hyun, 2021. "Markups and income inequality: Causal links, 1975-2011," Journal of Comparative Economics, Elsevier, vol. 49(2), pages 290-312.
    13. Alexandre, Fernando & Bação, Pedro & Veiga, Francisco José, 2022. "The political economy of productivity growth," European Journal of Political Economy, Elsevier, vol. 75(C).
    14. Thomas Gries & Rainer Grundmann, 2020. "Modern sector development: The role of exports and institutions in developing countries," Review of Development Economics, Wiley Blackwell, vol. 24(2), pages 644-667, May.
    15. Michał Brzoza-Brzezina & Jacek Kotłowski & Kamil Wierus, 2015. "Can interest rate spreads stabilize the euro area?," Applied Economics, Taylor & Francis Journals, vol. 47(34-35), pages 3696-3709, July.
    16. Mahir Binici & Yin-Wong Cheung & Kon S. Lai, 2011. "Trade Openness, Market Competition, and Inflation: Some Sectoral Evidence from OECD Countries," CESifo Working Paper Series 3690, CESifo.
    17. Friesenbichler, Klaus S. & Glocker, Christian, 2019. "Tradability and productivity growth differentials across EU Member States," Structural Change and Economic Dynamics, Elsevier, vol. 50(C), pages 1-13.
    18. Bertinelli, Luisito & Cardi, Olivier & Restout, Romain, 2022. "Labor market effects of technology shocks biased toward the traded sector," Journal of International Economics, Elsevier, vol. 138(C).
    19. Akhilesh K. Verma & Rajeswari Sengupta, 2021. "Interlinkages between external debt financing, credit cycles and output fluctuations in emerging market economies," Review of World Economics (Weltwirtschaftliches Archiv), Springer;Institut für Weltwirtschaft (Kiel Institute for the World Economy), vol. 157(4), pages 965-1001, November.
    20. Gehringer, Agnieszka & Prettner, Klaus, 2019. "Longevity And Technological Change," Macroeconomic Dynamics, Cambridge University Press, vol. 23(4), pages 1471-1503, June.

    More about this item

    Keywords

    Manufacturing TFP; Non-manufacturing TFP; Re-industrialization; Economic growth;
    All these keywords.

    JEL classification:

    • L52 - Industrial Organization - - Regulation and Industrial Policy - - - Industrial Policy; Sectoral Planning Methods
    • L60 - Industrial Organization - - Industry Studies: Manufacturing - - - General
    • O14 - Economic Development, Innovation, Technological Change, and Growth - - Economic Development - - - Industrialization; Manufacturing and Service Industries; Choice of Technology

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:streco:v:52:y:2020:i:c:p:174-183. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/inca/525148 .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.