IDEAS home Printed from https://ideas.repec.org/a/eee/rensus/v73y2017icp1198-1210.html
   My bibliography  Save this article

A review on the applications of porous materials in solar energy systems

Author

Listed:
  • Rashidi, Saman
  • Esfahani, Javad Abolfazli
  • Rashidi, Abbas

Abstract

According to energy policies, it is necessary to replace electrical energy or fossil fuels by renewable energy sources. Solar energy systems are recognized as one of these sources. In such systems, high-performance is one of the essential needs. Porous materials have been introduced as one of the most efficient and affordable techniques to improve the heat transfer and energy efficiency in solar energy systems. In this review, the applications of porous materials and their advantages and limitations on different types of solar energy systems are summarized. Moreover, the structures of each system with their applications are briefly introduced. Solar energy systems covered in this paper contains both energy conversion and energy storage systems.

Suggested Citation

  • Rashidi, Saman & Esfahani, Javad Abolfazli & Rashidi, Abbas, 2017. "A review on the applications of porous materials in solar energy systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 1198-1210.
    • Handle: RePEc:eee:rensus:v:73:y:2017:i:c:p:1198-1210
    DOI: 10.1016/j.rser.2017.02.028
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S1364032117302307
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.rser.2017.02.028?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Lalji, Mukesh Kumar & Sarviya, R.M. & Bhagoria, J.L., 2012. "Exergy evaluation of packed bed solar air heater," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(8), pages 6262-6267.
    2. Dehghan, Maziar & Rahmani, Yousef & Domiri Ganji, Davood & Saedodin, Seyfollah & Valipour, Mohammad Sadegh & Rashidi, Saman, 2015. "Convection–radiation heat transfer in solar heat exchangers filled with a porous medium: Homotopy perturbation method versus numerical analysis," Renewable Energy, Elsevier, vol. 74(C), pages 448-455.
    3. Hurtado, F.J. & Kaiser, A.S. & Zamora, B., 2012. "Evaluation of the influence of soil thermal inertia on the performance of a solar chimney power plant," Energy, Elsevier, vol. 47(1), pages 213-224.
    4. Novo, Amaya V. & Bayon, Joseba R. & Castro-Fresno, Daniel & Rodriguez-Hernandez, Jorge, 2010. "Review of seasonal heat storage in large basins: Water tanks and gravel-water pits," Applied Energy, Elsevier, vol. 87(2), pages 390-397, February.
    5. Kasaeian, Alibakhsh & Eshghi, Amin Toghi & Sameti, Mohammad, 2015. "A review on the applications of nanofluids in solar energy systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 43(C), pages 584-598.
    6. Chen, Wei & Liu, Wei, 2004. "Numerical analysis of heat transfer in a composite wall solar-collector system with a porous absorber," Applied Energy, Elsevier, vol. 78(2), pages 137-149, June.
    7. Reddy, K.S. & Ravi Kumar, K. & Ajay, C.S., 2015. "Experimental investigation of porous disc enhanced receiver for solar parabolic trough collector," Renewable Energy, Elsevier, vol. 77(C), pages 308-319.
    8. Gawande, Vipin B. & Dhoble, A.S. & Zodpe, D.B., 2014. "Effect of roughness geometries on heat transfer enhancement in solar thermal systems – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 32(C), pages 347-378.
    9. Cai, Yibing & Ke, Huizhen & Dong, Ju & Wei, Qufu & Lin, Jiulong & Zhao, Yong & Song, Lei & Hu, Yuan & Huang, Fenglin & Gao, Weidong & Fong, Hao, 2011. "Effects of nano-SiO2 on morphology, thermal energy storage, thermal stability, and combustion properties of electrospun lauric acid/PET ultrafine composite fibers as form-stable phase change materials," Applied Energy, Elsevier, vol. 88(6), pages 2106-2112, June.
    10. Sopian, K & Supranto, & Daud, W.R.W & Othman, M.Y & Yatim, B, 1999. "Thermal performance of the double-pass solar collector with and without porous media," Renewable Energy, Elsevier, vol. 18(4), pages 557-564.
    11. Fend, Thomas & Hoffschmidt, Bernhard & Pitz-Paal, Robert & Reutter, Oliver & Rietbrock, Peter, 2004. "Porous materials as open volumetric solar receivers: Experimental determination of thermophysical and heat transfer properties," Energy, Elsevier, vol. 29(5), pages 823-833.
    12. Kandasamy, R. & Muhaimin, I. & Rosmila, A.K., 2014. "The performance evaluation of unsteady MHD non-Darcy nanofluid flow over a porous wedge due to renewable (solar) energy," Renewable Energy, Elsevier, vol. 64(C), pages 1-9.
    13. Shi, Yufeng & Yin, Fang & Shi, Lihua & Wence, Sun & Li, Nan & Liu, Hong, 2011. "Effects of porous media on thermal and salt diffusion of solar pond," Applied Energy, Elsevier, vol. 88(7), pages 2445-2453, July.
    14. Dhankhar, Meena & Pal Singh, Om & Singh, V.N., 2014. "Physical principles of losses in thin film solar cells and efficiency enhancement methods," Renewable and Sustainable Energy Reviews, Elsevier, vol. 40(C), pages 214-223.
    15. Xu, Chang & Song, Zhe & Chen, Lea-der & Zhen, Yuan, 2011. "Numerical investigation on porous media heat transfer in a solar tower receiver," Renewable Energy, Elsevier, vol. 36(3), pages 1138-1144.
    16. Madani, A. A. & Zaki, G. M., 1995. "Yield of solar stills with porous basins," Applied Energy, Elsevier, vol. 52(2-3), pages 273-281.
    17. Ravi, Ravi Kant & Saini, Rajeshwer Prasad, 2016. "A review on different techniques used for performance enhancement of double pass solar air heaters," Renewable and Sustainable Energy Reviews, Elsevier, vol. 56(C), pages 941-952.
    18. Chen, Wei & Qu, Man, 2014. "Analysis of the heat transfer and airflow in solar chimney drying system with porous absorber," Renewable Energy, Elsevier, vol. 63(C), pages 511-518.
    19. Jamal-Abad, Milad Tajik & Saedodin, Seyfolah & Aminy, Mohammad, 2016. "Heat transfer in concentrated solar air-heaters filled with a porous medium with radiation effects: A perturbation solution," Renewable Energy, Elsevier, vol. 91(C), pages 147-154.
    20. Al-Nimr, M.A. & Alkam, M.K., 1998. "A modified tubeless solar collector partially filled with porous substrate," Renewable Energy, Elsevier, vol. 13(2), pages 165-173.
    21. Aldabbagh, L.B.Y. & Egelioglu, F. & Ilkan, M., 2010. "Single and double pass solar air heaters with wire mesh as packing bed," Energy, Elsevier, vol. 35(9), pages 3783-3787.
    22. Al-Kayiem, Hussain H. & Aja, Ogboo Chikere, 2016. "Historic and recent progress in solar chimney power plant enhancing technologies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 58(C), pages 1269-1292.
    23. Sivakumar, V. & Ganapathy Sundaram, E., 2013. "Improvement techniques of solar still efficiency: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 28(C), pages 246-264.
    24. Lansing, F.L. & Clarke, V. & Reynolds, R., 1979. "A high performance porous flat-plate solar collector," Energy, Elsevier, vol. 4(4), pages 685-694.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Caket, Ahmet Guray & Wang, Chunyang & Nugroho, Marvel Alif & Celik, Hasan & Mobedi, Moghtada, 2022. "Recent studies on 3D lattice metal frame technique for enhancement of heat transfer: Discovering trends and reasons," Renewable and Sustainable Energy Reviews, Elsevier, vol. 167(C).
    2. Tayebi, Tahar & Chamkha, Ali J. & Öztop, Hakan F. & Bouzeroura, Lynda, 2022. "Local thermal non-equilibrium (LTNE) effects on thermal-free convection in a nanofluid-saturated horizontal elliptical non-Darcian porous annulus," Mathematics and Computers in Simulation (MATCOM), Elsevier, vol. 194(C), pages 124-140.
    3. Yufei Wang & Yilong Zhou & Quanpeng Yang & Rourav Basak & Yu Xie & Dong Le & Alexander D. Fuqua & Wade Shipley & Zachary Yam & Alex Frano & Gaurav Arya & Andrea R. Tao, 2024. "Self-assembly of nanocrystal checkerboard patterns via non-specific interactions," Nature Communications, Nature, vol. 15(1), pages 1-9, December.
    4. Tan, Weng Cheong & Saw, Lip Huat & Thiam, Hui San & Xuan, Jin & Cai, Zuansi & Yew, Ming Chian, 2018. "Overview of porous media/metal foam application in fuel cells and solar power systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 96(C), pages 181-197.
    5. Jouybari, Nima Fallah & Lundström, T. Staffan, 2020. "Performance improvement of a solar air heater by covering the absorber plate with a thin porous material," Energy, Elsevier, vol. 190(C).
    6. Jouybari, H. Javaniyan & Saedodin, S. & Zamzamian, A. & Nimvari, M. Eshagh & Wongwises, S., 2017. "Effects of porous material and nanoparticles on the thermal performance of a flat plate solar collector: An experimental study," Renewable Energy, Elsevier, vol. 114(PB), pages 1407-1418.
    7. Rashidi, Saman & Kashefi, Mohammad Hossein & Kim, Kyung Chun & Samimi-Abianeh, Omid, 2019. "Potentials of porous materials for energy management in heat exchangers – A comprehensive review," Applied Energy, Elsevier, vol. 243(C), pages 206-232.
    8. Ebadi, Hossein & Cammi, Antonio & Difonzo, Rosa & Rodríguez, José & Savoldi, Laura, 2023. "Experimental investigation on an air tubular absorber enhanced with Raschig Rings porous medium in a solar furnace," Applied Energy, Elsevier, vol. 342(C).
    9. Liu, Yun & Xie, Ling-tian & Shen, Wen-ran & Xu, Chao & Zhao, Bo-yang, 2023. "Relative flow direction modes and gradual porous parameters for radiation transport and interactions with thermochemical reaction in porous volumetric solar reactor," Renewable Energy, Elsevier, vol. 203(C), pages 612-621.
    10. Milad Setareh & Mohammad Reza Assari & Hassan Basirat Tabrizi & Mohammad Alizadeh, 2024. "Performance of a stepped solar still using porous materials experimentally," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 26(11), pages 28519-28538, November.
    11. Cengiz, Mazlum & Kayri, İsmail & Aydın, Hüseyin, 2024. "A collated overview on the evaporative cooling applications for photovoltaic modules," Renewable and Sustainable Energy Reviews, Elsevier, vol. 197(C).
    12. Wang, P. & Li, J.B. & Xu, R.N. & Jiang, P.X., 2021. "Non-uniform and volumetric effect on the hydrodynamic and thermal characteristic in a unit solar absorber," Energy, Elsevier, vol. 225(C).
    13. Ma, Yuan & Xie, Gongnan & Hooman, Kamel, 2022. "Review of printed circuit heat exchangers and its applications in solar thermal energy," Renewable and Sustainable Energy Reviews, Elsevier, vol. 155(C).
    14. Rashidi, Saman & Esfahani, Javad Abolfazli & Karimi, Nader, 2018. "Porous materials in building energy technologies—A review of the applications, modelling and experiments," Renewable and Sustainable Energy Reviews, Elsevier, vol. 91(C), pages 229-247.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Rajarajeswari, K. & Sreekumar, A., 2016. "Matrix solar air heaters – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 57(C), pages 704-712.
    2. Tan, Weng Cheong & Saw, Lip Huat & Thiam, Hui San & Xuan, Jin & Cai, Zuansi & Yew, Ming Chian, 2018. "Overview of porous media/metal foam application in fuel cells and solar power systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 96(C), pages 181-197.
    3. Varun Pratap Singh & Siddharth Jain & Ashish Karn & Ashwani Kumar & Gaurav Dwivedi & Chandan Swaroop Meena & Nitesh Dutt & Aritra Ghosh, 2022. "Recent Developments and Advancements in Solar Air Heaters: A Detailed Review," Sustainability, MDPI, vol. 14(19), pages 1-55, September.
    4. Anirudh, K. & Dhinakaran, S., 2020. "Numerical study on performance improvement of a flat-plate solar collector filled with porous foam," Renewable Energy, Elsevier, vol. 147(P1), pages 1704-1717.
    5. Razak, A.A. & Majid, Z.A.A. & Azmi, W.H. & Ruslan, M.H. & Choobchian, Sh. & Najafi, G. & Sopian, K., 2016. "Review on matrix thermal absorber designs for solar air collector," Renewable and Sustainable Energy Reviews, Elsevier, vol. 64(C), pages 682-693.
    6. Dehghan, Maziar & Rahmani, Yousef & Domiri Ganji, Davood & Saedodin, Seyfollah & Valipour, Mohammad Sadegh & Rashidi, Saman, 2015. "Convection–radiation heat transfer in solar heat exchangers filled with a porous medium: Homotopy perturbation method versus numerical analysis," Renewable Energy, Elsevier, vol. 74(C), pages 448-455.
    7. Kumar, Anil & Kim, Man-Hoe, 2017. "Solar air-heating system with packed-bed energy-storage systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 72(C), pages 215-227.
    8. Reddy, K.S. & Nataraj, Sundarraj, 2019. "Thermal analysis of porous volumetric receivers of concentrated solar dish and tower systems," Renewable Energy, Elsevier, vol. 132(C), pages 786-797.
    9. Jouybari, H. Javaniyan & Saedodin, S. & Zamzamian, A. & Nimvari, M. Eshagh & Wongwises, S., 2017. "Effects of porous material and nanoparticles on the thermal performance of a flat plate solar collector: An experimental study," Renewable Energy, Elsevier, vol. 114(PB), pages 1407-1418.
    10. Dhiman, Prashant & Thakur, N.S. & Chauhan, S.R., 2012. "Thermal and thermohydraulic performance of counter and parallel flow packed bed solar air heaters," Renewable Energy, Elsevier, vol. 46(C), pages 259-268.
    11. Vengadesan, Elumalai & Senthil, Ramalingam, 2020. "A review on recent developments in thermal performance enhancement methods of flat plate solar air collector," Renewable and Sustainable Energy Reviews, Elsevier, vol. 134(C).
    12. Ming, Tingzhen & Wu, Yongjia & de_Richter, Renaud K. & Liu, Wei & Sherif, S.A., 2017. "Solar updraft power plant system: A brief review and a case study on a new system with radial partition walls in its collector," Renewable and Sustainable Energy Reviews, Elsevier, vol. 69(C), pages 472-487.
    13. Akbarzadeh, Sanaz & Valipour, Mohammad Sadegh, 2020. "Energy and exergy analysis of a parabolic trough collector using helically corrugated absorber tube," Renewable Energy, Elsevier, vol. 155(C), pages 735-747.
    14. Alam, Tabish & Kim, Man-Hoe, 2017. "Performance improvement of double-pass solar air heater – A state of art of review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 79(C), pages 779-793.
    15. He, Y.L. & Cheng, Z.D. & Cui, F.Q. & Li, Z.Y. & Li, D., 2012. "Numerical investigations on a pressurized volumetric receiver: Solar concentrating and collecting modelling," Renewable Energy, Elsevier, vol. 44(C), pages 368-379.
    16. Torkfar, Arman & Arefian, Amir & Hosseini-Abardeh, Reza & Bahrami, Mohsen, 2023. "Implementation of active and passive control strategies for power generation in a solar chimney power plant: A technical evaluation of Manzanares prototype," Renewable Energy, Elsevier, vol. 216(C).
    17. Kareem, M.W. & Habib, Khairul & Pasha, Amjad A. & Irshad, Kashif & Afolabi, L.O. & Saha, Bidyut Baran, 2022. "Experimental study of multi-pass solar air thermal collector system assisted with sensible energy-storing matrix," Energy, Elsevier, vol. 245(C).
    18. Jin, Xin & Lin, Guiping & Zeiny, Aimen & Jin, Haichuan & Bai, Lizhan & Wen, Dongsheng, 2019. "Solar photothermal conversion characteristics of hybrid nanofluids: An experimental and numerical study," Renewable Energy, Elsevier, vol. 141(C), pages 937-949.
    19. Li, Qing & Bai, Fengwu & Yang, Bei & Wang, Zhifeng & El Hefni, Baligh & Liu, Sijie & Kubo, Syuichi & Kiriki, Hiroaki & Han, Mingxu, 2016. "Dynamic simulation and experimental validation of an open air receiver and a thermal energy storage system for solar thermal power plant," Applied Energy, Elsevier, vol. 178(C), pages 281-293.
    20. Oztop, Hakan F. & Bayrak, Fatih & Hepbasli, Arif, 2013. "Energetic and exergetic aspects of solar air heating (solar collector) systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 21(C), pages 59-83.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:rensus:v:73:y:2017:i:c:p:1198-1210. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/600126/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.