IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v77y2015icp308-319.html
   My bibliography  Save this article

Experimental investigation of porous disc enhanced receiver for solar parabolic trough collector

Author

Listed:
  • Reddy, K.S.
  • Ravi Kumar, K.
  • Ajay, C.S.

Abstract

In this article, experimental investigation of 15 m2 solar parabolic trough collector with porous disc enhanced receiver is carried out according to ASHRAE 93-1986 test procedure. Six different receiver configurations are developed and investigated to compare their performance. The performance of solar parabolic trough collector with two conventional and four porous disc receivers is characterized in terms of time constant, collector acceptance angle, peak performance, daily performance and heat loss tests. The tests are carried out for wide range of flow rates (100 L/h–1000 L/h) and weather conditions. Based on experimental investigation, the time constant of the parabolic trough collector is varied from 70 s to 260 s for different receiver configurations. The collector acceptance angle is determined for both un-shielded tubular receiver (USTR) and shielded tubular receiver (STR) as 0.58° and 0.68° respectively. The collector efficiencies are obtained as in the range of 63.9%–66.66% under ASHRAE standard test condition. Off-Sunset heat loss test is conducted to determine the steady state heat losses from the parabolic trough collector receiver. The heat losses from the parabolic trough collector are in the range of 455 W/m2–1732 W/m2 for average fluid temperature of Tamb + 30 °C. Stagnation temperature of the collector is obtained as 258 °C and 312 °C respectively for USTR and STR corresponding to direct normal insolation (DNI) of 786 W/m2 and 761 W/m2. Based on the above analysis, the porous disc enhanced receiver improves the performance of the parabolic trough collector significantly and it can be used effectively for process heat applications.

Suggested Citation

  • Reddy, K.S. & Ravi Kumar, K. & Ajay, C.S., 2015. "Experimental investigation of porous disc enhanced receiver for solar parabolic trough collector," Renewable Energy, Elsevier, vol. 77(C), pages 308-319.
    • Handle: RePEc:eee:renene:v:77:y:2015:i:c:p:308-319
    DOI: 10.1016/j.renene.2014.12.016
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148114008428
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2014.12.016?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Bakos, George C., 2006. "Design and construction of a two-axis Sun tracking system for parabolic trough collector (PTC) efficiency improvement," Renewable Energy, Elsevier, vol. 31(15), pages 2411-2421.
    2. Kalogirou, Soteris, 2003. "The potential of solar industrial process heat applications," Applied Energy, Elsevier, vol. 76(4), pages 337-361, December.
    3. Kalogirou, Soteris, 1996. "Parabolic trough collector system for low temperature steam generation: Design and performance characteristics," Applied Energy, Elsevier, vol. 55(1), pages 1-19, September.
    4. Ravi Kumar, K. & Reddy, K.S., 2009. "Thermal analysis of solar parabolic trough with porous disc receiver," Applied Energy, Elsevier, vol. 86(9), pages 1804-1812, September.
    5. Al-Nimr, M.A. & Alkam, M.K., 1998. "A modified tubeless solar collector partially filled with porous substrate," Renewable Energy, Elsevier, vol. 13(2), pages 165-173.
    6. Eck, Markus & Steinmann, Wolf-Dieter & Rheinländer, Jürgen, 2004. "Maximum temperature difference in horizontal and tilted absorber pipes with direct steam generation," Energy, Elsevier, vol. 29(5), pages 665-676.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ajbar, Wassila & Parrales, A. & Huicochea, A. & Hernández, J.A., 2022. "Different ways to improve parabolic trough solar collectors’ performance over the last four decades and their applications: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 156(C).
    2. Wang, P. & Liu, D.Y. & Xu, C., 2013. "Numerical study of heat transfer enhancement in the receiver tube of direct steam generation with parabolic trough by inserting metal foams," Applied Energy, Elsevier, vol. 102(C), pages 449-460.
    3. Jebasingh, V.K. & Herbert, G.M. Joselin, 2016. "A review of solar parabolic trough collector," Renewable and Sustainable Energy Reviews, Elsevier, vol. 54(C), pages 1085-1091.
    4. Wang, Ruilin & Qu, Wanjun & Hong, Hui & Sun, Jie & Jin, Hongguang, 2018. "Experimental performance of 300 kWth prototype of parabolic trough collector with rotatable axis and irreversibility analysis," Energy, Elsevier, vol. 161(C), pages 595-609.
    5. Stanek, Bartosz & Węcel, Daniel & Bartela, Łukasz & Rulik, Sebastian, 2022. "Solar tracker error impact on linear absorbers efficiency in parabolic trough collector – Optical and thermodynamic study," Renewable Energy, Elsevier, vol. 196(C), pages 598-609.
    6. El Ghazzani, Badreddine & Martinez Plaza, Diego & Ait El Cadi, Radia & Ihlal, Ahmed & Abnay, Brahim & Bouabid, Khalid, 2017. "Thermal plant based on parabolic trough collectors for industrial process heat generation in Morocco," Renewable Energy, Elsevier, vol. 113(C), pages 1261-1275.
    7. Abdulhamed, Ali Jaber & Adam, Nor Mariah & Ab-Kadir, Mohd Zainal Abidin & Hairuddin, Abdul Aziz, 2018. "Review of solar parabolic-trough collector geometrical and thermal analyses, performance, and applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 91(C), pages 822-831.
    8. Carnevale, Ennio A. & Ferrari, Lorenzo & Paganelli, Simone, 2011. "Investigation on the feasibility of integration of high temperature solar energy in a textile factory," Renewable Energy, Elsevier, vol. 36(12), pages 3517-3529.
    9. Manikandan, G.K. & Iniyan, S. & Goic, Ranko, 2019. "Enhancing the optical and thermal efficiency of a parabolic trough collector – A review," Applied Energy, Elsevier, vol. 235(C), pages 1524-1540.
    10. Moghimi, M.A. & Ahmadi, G., 2018. "Wind barriers optimization for minimizing collector mirror soiling in a parabolic trough collector plant," Applied Energy, Elsevier, vol. 225(C), pages 413-423.
    11. Tian, Y. & Zhao, C.Y., 2013. "A review of solar collectors and thermal energy storage in solar thermal applications," Applied Energy, Elsevier, vol. 104(C), pages 538-553.
    12. Qu, Wanjun & Wang, Ruilin & Hong, Hui & Sun, Jie & Jin, Hongguang, 2017. "Test of a solar parabolic trough collector with rotatable axis tracking," Applied Energy, Elsevier, vol. 207(C), pages 7-17.
    13. Kizilkan, Onder & Kabul, Ahmet & Dincer, Ibrahim, 2016. "Development and performance assessment of a parabolic trough solar collector-based integrated system for an ice-cream factory," Energy, Elsevier, vol. 100(C), pages 167-176.
    14. Reddy, K.S. & Nataraj, Sundarraj, 2019. "Thermal analysis of porous volumetric receivers of concentrated solar dish and tower systems," Renewable Energy, Elsevier, vol. 132(C), pages 786-797.
    15. Deymi-Dashtebayaz, Mahdi & Kheir Abadi, Majid & Asadi, Mostafa & Khutornaya, Julia & Sergienko, Olga, 2024. "Investigation of a new solar-wind energy-based heat pump dryer for food waste drying based on different weather conditions," Energy, Elsevier, vol. 290(C).
    16. Lozano-Medina, Alexis & Manzano, Luis & Marcos, José D. & Blanco-Marigorta, Ana M., 2019. "Design of a concentrating solar thermal collector installation for a hotel complex in Gran Canaria," Energy, Elsevier, vol. 183(C), pages 803-811.
    17. Bitam, El Wardi & Demagh, Yassine & Hachicha, Ahmed A. & Benmoussa, Hocine & Kabar, Yassine, 2018. "Numerical investigation of a novel sinusoidal tube receiver for parabolic trough technology," Applied Energy, Elsevier, vol. 218(C), pages 494-510.
    18. Zhou, Liqun & Wang, Yiping & Huang, Qunwu, 2019. "Parametric analysis on the performance of flat plate collector with transparent insulation material," Energy, Elsevier, vol. 174(C), pages 534-542.
    19. de Sá, Alexandre Bittencourt & Pigozzo Filho, Victor César & Tadrist, Lounès & Passos, Júlio César, 2018. "Direct steam generation in linear solar concentration: Experimental and modeling investigation – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 90(C), pages 910-936.
    20. Ehab AlShamaileh & Iessa Sabbe Moosa & Heba Al-Fayyad & Bashar Lahlouh & Hussein A. Kazem & Qusay Abu-Afifeh & Bety S. Al-Saqarat & Muayad Esaifan & Imad Hamadneh, 2022. "Performance Comparison and Light Reflectance of Al, Cu, and Fe Metals in Direct Contact Flat Solar Heating Systems," Energies, MDPI, vol. 15(23), pages 1-15, November.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:77:y:2015:i:c:p:308-319. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.