IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v224y2024ics0960148124002477.html
   My bibliography  Save this article

Co-processing of organic fraction from groundnut shell biocrude with VGO in FCC unit to produce petrochemical products

Author

Listed:
  • Kakku, Sivasankar
  • Naidu, Sowkhya
  • Chakinala, Anand G.
  • Joshi, Jyeshtharaj
  • Thota, Chiranjeevi
  • Maity, Pintu
  • Sharma, Abhishek

Abstract

This research work explores the transformative potential of biomass leading to sustainable production of biocrude and its utilization in refinery and petrochemical sector for reducing reliance on fossil fuels. In this study, groundnut shell biomass was thermally converted in a customized continuous semi pilot auger reactor in temperature range of 400–700 °C. The optimum temperature for maximizing biocrude was studied, and detailed chemical analysis revealed that biocrude contains hydrocarbons and alcohols with a calorific value of 29 MJ/kg. Furthermore, this study demonstrates the performance of the FCC (Fluid Catalytic Cracking) catalyst and feedstock (H-T- VGO (Hydrothermal vacuum gasoline oil) & Biocrude) in a laboratory-scale utilizing ACE R + MM (Advanced Cracking Evaluation - Residue and Metals Management) unit under predetermined temperatures (515 °C, 525 °C) and a fixed cat-to-oil weight ratio (CTO = 6 w/w). The organic phase and FCC feedstock in different weight ratios from 5 to 20 wt % were blended. There are marginal changes in the yields of dry gas, LCO (light cycle oil) and HCO (heavy cycle oil), with significant increase in the yields of LPG (liquified petroleum gas) and gasoline. Bottoms have been reduced, and coke formation has been adjusted. However, this process requires prudent blending and temperature choices, with future recommendations including improvement in the quality of biocrude to enhance the yields of both LPG and gasoline along with reduced coke formation.

Suggested Citation

  • Kakku, Sivasankar & Naidu, Sowkhya & Chakinala, Anand G. & Joshi, Jyeshtharaj & Thota, Chiranjeevi & Maity, Pintu & Sharma, Abhishek, 2024. "Co-processing of organic fraction from groundnut shell biocrude with VGO in FCC unit to produce petrochemical products," Renewable Energy, Elsevier, vol. 224(C).
    • Handle: RePEc:eee:renene:v:224:y:2024:i:c:s0960148124002477
    DOI: 10.1016/j.renene.2024.120182
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148124002477
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2024.120182?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Pradhan, Debalaxmi & Bendu, Harisankar & Singh, R.K. & Murugan, S., 2017. "Mahua seed pyrolysis oil blends as an alternative fuel for light-duty diesel engines," Energy, Elsevier, vol. 118(C), pages 600-612.
    2. Chiaramonti, David & Oasmaa, Anja & Solantausta, Yrjö, 2007. "Power generation using fast pyrolysis liquids from biomass," Renewable and Sustainable Energy Reviews, Elsevier, vol. 11(6), pages 1056-1086, August.
    3. Douvartzides, Savvas & Charisiou, Nikolaos D. & Wang, Wen & Papadakis, Vagelis G. & Polychronopoulou, Kyriaki & Goula, Maria A., 2022. "Catalytic fast pyrolysis of agricultural residues and dedicated energy crops for the production of high energy density transportation biofuels. Part I: Chemical pathways and bio-oil upgrading," Renewable Energy, Elsevier, vol. 185(C), pages 483-505.
    4. Amutio, M. & Lopez, G. & Artetxe, M. & Elordi, G. & Olazar, M. & Bilbao, J., 2012. "Influence of temperature on biomass pyrolysis in a conical spouted bed reactor," Resources, Conservation & Recycling, Elsevier, vol. 59(C), pages 23-31.
    5. Hossain, A.K. & Davies, P.A., 2013. "Pyrolysis liquids and gases as alternative fuels in internal combustion engines – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 21(C), pages 165-189.
    6. Dimitriadis, Athanasios & Chrysikou, Loukia P. & Meletidis, George & Terzis, George & Auersvald, Miloš & Kubička, David & Bezergianni, Stella, 2021. "Bio-based refinery intermediate production via hydrodeoxygenation of fast pyrolysis bio-oil," Renewable Energy, Elsevier, vol. 168(C), pages 593-605.
    7. Alberto Veses & Juan Daniel Martínez & María Soledad Callén & Ramón Murillo & Tomás García, 2020. "Application of Upgraded Drop-In Fuel Obtained from Biomass Pyrolysis in a Spark Ignition Engine," Energies, MDPI, vol. 13(8), pages 1-15, April.
    8. Bhatt, Arpit H. & Zhang, Yimin & Heath, Garvin, 2020. "Bio-oil co-processing can substantially contribute to renewable fuel production potential and meet air quality standards," Applied Energy, Elsevier, vol. 268(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Fernandez, Enara & Santamaria, Laura & Amutio, Maider & Artetxe, Maite & Arregi, Aitor & Lopez, Gartzen & Bilbao, Javier & Olazar, Martin, 2022. "Role of temperature in the biomass steam pyrolysis in a conical spouted bed reactor," Energy, Elsevier, vol. 238(PC).
    2. Chintala, Venkateswarlu, 2018. "Production, upgradation and utilization of solar assisted pyrolysis fuels from biomass – A technical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 90(C), pages 120-130.
    3. Gunerhan, Ali & Altuntas, Onder & Caliskan, Hakan, 2024. "Analyzing the influence of feedstock selection in pyrolysis on aviation gas turbine engines: A study on performance, combustion efficiency, and emission profiles," Energy, Elsevier, vol. 306(C).
    4. Nguyen, Quynh Van & Choi, Yeon Seok & Jeong, Yeon Woo & Han, So Young & Choi, Sang Kyu, 2024. "Catalytic co-pyrolysis of coffee-grounds and waste polystyrene foam by calcium oxide in bubbling fluidized bed reactor," Renewable Energy, Elsevier, vol. 224(C).
    5. Feng, Qunjie & Lin, Yunqin, 2017. "Integrated processes of anaerobic digestion and pyrolysis for higher bioenergy recovery from lignocellulosic biomass: A brief review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 77(C), pages 1272-1287.
    6. Alberto Veses & Juan Daniel Martínez & María Soledad Callén & Ramón Murillo & Tomás García, 2020. "Application of Upgraded Drop-In Fuel Obtained from Biomass Pyrolysis in a Spark Ignition Engine," Energies, MDPI, vol. 13(8), pages 1-15, April.
    7. González, Arnau & Riba, Jordi-Roger & Puig, Rita & Navarro, Pere, 2015. "Review of micro- and small-scale technologies to produce electricity and heat from Mediterranean forests׳ wood chips," Renewable and Sustainable Energy Reviews, Elsevier, vol. 43(C), pages 143-155.
    8. Broumand, Mohsen & Khan, Muhammad Shahzeb & Yun, Sean & Hong, Zekai & Thomson, Murray J., 2021. "Feasibility of running a micro gas turbine on wood-derived fast pyrolysis bio-oils: Effect of the fuel spray formation and preparation," Renewable Energy, Elsevier, vol. 178(C), pages 775-784.
    9. Buffi, Marco & Seljak, Tine & Cappelletti, Alessandro & Bettucci, Lorenzo & Valera-Medina, Agustin & Katrašnik, Tomaž & Chiaramonti, David, 2018. "Performance and emissions of liquefied wood as fuel for a small scale gas turbine," Applied Energy, Elsevier, vol. 230(C), pages 1193-1204.
    10. Chen, Dengyu & Zhou, Jianbin & Zhang, Qisheng & Zhu, Xifeng, 2014. "Evaluation methods and research progresses in bio-oil storage stability," Renewable and Sustainable Energy Reviews, Elsevier, vol. 40(C), pages 69-79.
    11. Bergthorson, Jeffrey M. & Thomson, Murray J., 2015. "A review of the combustion and emissions properties of advanced transportation biofuels and their impact on existing and future engines," Renewable and Sustainable Energy Reviews, Elsevier, vol. 42(C), pages 1393-1417.
    12. Taghizadeh-Alisaraei, Ahmad & Assar, Hossein Alizadeh & Ghobadian, Barat & Motevali, Ali, 2017. "Potential of biofuel production from pistachio waste in Iran," Renewable and Sustainable Energy Reviews, Elsevier, vol. 72(C), pages 510-522.
    13. Fan, Jiqing & Kalnes, Tom N. & Alward, Matthew & Klinger, Jordan & Sadehvandi, Adam & Shonnard, David R., 2011. "Life cycle assessment of electricity generation using fast pyrolysis bio-oil," Renewable Energy, Elsevier, vol. 36(2), pages 632-641.
    14. Yang, S.I. & Hsu, T.C. & Wu, C.Y. & Chen, K.H. & Hsu, Y.L. & Li, Y.H., 2014. "Application of biomass fast pyrolysis part II: The effects that bio-pyrolysis oil has on the performance of diesel engines," Energy, Elsevier, vol. 66(C), pages 172-180.
    15. Moon, Hyeong-Bin & Lee, Ji-Hwan & Kim, Hyung-Tae & Lee, Jin-Wook & Lee, Byoung-Hwa & Jeon, Chung-Hwan, 2024. "Effect of high-pressure pyrolysis on syngas and char structure of petroleum coke," Energy, Elsevier, vol. 299(C).
    16. Ji, Li-Qun & Zhang, Chuang & Fang, Jing-Qi, 2017. "Economic analysis of converting of waste agricultural biomass into liquid fuel: A case study on a biofuel plant in China," Renewable and Sustainable Energy Reviews, Elsevier, vol. 70(C), pages 224-229.
    17. Fox, James A. & Stacey, Neil T., 2019. "Process targeting: An energy based comparison of waste plastic processing technologies," Energy, Elsevier, vol. 170(C), pages 273-283.
    18. Van de Beld, Bert & Holle, Elmar & Florijn, Jan, 2013. "The use of pyrolysis oil and pyrolysis oil derived fuels in diesel engines for CHP applications," Applied Energy, Elsevier, vol. 102(C), pages 190-197.
    19. Singh, Rawel & Krishna, Bhavya B. & Mishra, Garima & Kumar, Jitendra & Bhaskar, Thallada, 2016. "Strategies for selection of thermo-chemical processes for the valorisation of biomass," Renewable Energy, Elsevier, vol. 98(C), pages 226-237.
    20. Sulaiman, F. & Abdullah, N., 2011. "Optimum conditions for maximising pyrolysis liquids of oil palm empty fruit bunches," Energy, Elsevier, vol. 36(5), pages 2352-2359.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:224:y:2024:i:c:s0960148124002477. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.