IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v219y2023ip1s0960148123013782.html
   My bibliography  Save this article

Evaluating the effects of bifurcation angle on the performance of a novel heat exchanger based on contractual theory

Author

Listed:
  • Marzouk, S.A.
  • Abou Al-Sood, M.M.
  • M.S. El-Said, Emad
  • Younes, M.M.
  • K. El-Fakharany, Magda

Abstract

In this study, numerical and experimental analysis is presented to study the influences of bifurcation angles on the thermo-hydraulic performance in a novel heat exchanger by adopting contractual theory. The parameters of overall heat transfer coefficient, exergy efficiency, pressure drop, and coefficient of performance are investigated with three bifurcation angles (α = 120o, 150o, 180o). The mass flow rate in shell side is constant at 0.33 kg/s whereas the mass flow rates in tubes fluctuate from 0.169 to 0.331 kg/s. The numerical model was accomplished and the numerical results were validated by the experimental results and the error percentages are agreeable. The results show that the novel configurations of the heat exchanger based on constructed theory enhance heat transfer compared to standard shapes. The bifurcation angle of 150o accomplishes the highest enhancement of heat transfer whereas the heat exchanger with a bifurcation angle of 180o has the highest pressure drop. The configuration with α = 150o achieves higher values of COP compared to the other angles. The exergy efficiency improves with Re where the configuration with α = 180o has higher exergy efficiency. The contours, streamlines, and vectors of the temperature, velocity, and pressure distributions give investigation for the fluid stream inside the shell and tubes.

Suggested Citation

  • Marzouk, S.A. & Abou Al-Sood, M.M. & M.S. El-Said, Emad & Younes, M.M. & K. El-Fakharany, Magda, 2023. "Evaluating the effects of bifurcation angle on the performance of a novel heat exchanger based on contractual theory," Renewable Energy, Elsevier, vol. 219(P1).
    • Handle: RePEc:eee:renene:v:219:y:2023:i:p1:s0960148123013782
    DOI: 10.1016/j.renene.2023.119463
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148123013782
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2023.119463?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Yu, Guojun & Li, Huyu & Liu, Cong & Cheng, Wan & Xu, Huijin, 2023. "Thermal and hydraulic characteristics of a new proposed flyover-crossing fracture configuration for the enhanced geothermal system," Renewable Energy, Elsevier, vol. 211(C), pages 859-873.
    2. Xinmei Luo & Shengming Liao, 2018. "Numerical Study on Melting Heat Transfer in Dendritic Heat Exchangers," Energies, MDPI, vol. 11(10), pages 1-11, September.
    3. Manjunath, K. & Kaushik, S.C., 2014. "Second law thermodynamic study of heat exchangers: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 40(C), pages 348-374.
    4. Siddiqui, Osman K. & Zubair, Syed M., 2017. "Efficient energy utilization through proper design of microchannel heat exchanger manifolds: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 74(C), pages 969-1002.
    5. Ganjehkaviri, A. & Mohd Jaafar, M.N., 2020. "Multi-objective particle swarm optimization of flat plate solar collector using constructal theory," Energy, Elsevier, vol. 194(C).
    6. Zheng, Jiayi & Wang, Jing & Chen, Taotao & Yu, Yanshun, 2020. "Solidification performance of heat exchanger with tree-shaped fins," Renewable Energy, Elsevier, vol. 150(C), pages 1098-1107.
    7. Daniali, Omid Ali & Toghraie, Davood & Eftekhari, S. Ali, 2020. "Thermo-hydraulic and economic optimization of Iranol refinery oil heat exchanger with Copper oxide nanoparticles using MOMBO," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 540(C).
    8. Peng, Hao & Du, Yanlian & Hu, Fenfen & Tian, Zhen & Shen, Yijun, 2023. "Thermal management of high concentrator photovoltaic system using a novel double-layer tree-shaped fractal microchannel heat sink," Renewable Energy, Elsevier, vol. 204(C), pages 77-93.
    9. Humbert, Gabriele & Ding, Yulong & Sciacovelli, Adriano, 2022. "Combined enhancement of thermal and chemical performance of closed thermochemical energy storage system by optimized tree-like heat exchanger structures," Applied Energy, Elsevier, vol. 311(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Bejan, Adrian, 2018. "Thermodynamics today," Energy, Elsevier, vol. 160(C), pages 1208-1219.
    2. Zhao, Kai & Tian, Zhenyu & Zhang, Jinrui & Lu, Buchu & Hao, Yong, 2023. "Methanol steam reforming reactor with fractal tree-shaped structures for photovoltaic–thermochemical hybrid power generation," Applied Energy, Elsevier, vol. 330(PB).
    3. Gilmore, Nicholas & Timchenko, Victoria & Menictas, Chris, 2018. "Microchannel cooling of concentrator photovoltaics: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 90(C), pages 1041-1059.
    4. Liu, Zhan & Liu, Zihui & Guo, Junfei & Wang, Fan & Yang, Xiaohu & Yan, Jinyue, 2022. "Innovative ladder-shaped fin design on a latent heat storage device for waste heat recovery," Applied Energy, Elsevier, vol. 321(C).
    5. Bai, Xiao-Shuai & Yang, Wei-Wei & Tang, Xin-Yuan & Yang, Fu-Sheng & Jiao, Yu-Hang & Yang, Yu, 2021. "Optimization of tree-shaped fin structures towards enhanced absorption performance of metal hydride hydrogen storage device: A numerical study," Energy, Elsevier, vol. 220(C).
    6. Facci, Andrea L. & Sánchez, David & Jannelli, Elio & Ubertini, Stefano, 2015. "Trigenerative micro compressed air energy storage: Concept and thermodynamic assessment," Applied Energy, Elsevier, vol. 158(C), pages 243-254.
    7. Wanruo Lou & Lingai Luo & Yuchao Hua & Yilin Fan & Zhenyu Du, 2021. "A Review on the Performance Indicators and Influencing Factors for the Thermocline Thermal Energy Storage Systems," Energies, MDPI, vol. 14(24), pages 1-19, December.
    8. Wenwen Ye & Dourna Jamshideasli & Jay M. Khodadadi, 2023. "Improved Performance of Latent Heat Energy Storage Systems in Response to Utilization of High Thermal Conductivity Fins," Energies, MDPI, vol. 16(3), pages 1-83, January.
    9. El-Behery, Samy M. & Hussien, A.A. & Kotb, H. & El-Shafie, Mostafa, 2017. "Performance evaluation of industrial glass furnace regenerator," Energy, Elsevier, vol. 119(C), pages 1119-1130.
    10. Zhao, Zhigao & Yang, Jiandong & Chung, C.Y. & Yang, Weijia & He, Xianghui & Chen, Man, 2021. "Performance enhancement of pumped storage units for system frequency support based on a novel small signal model," Energy, Elsevier, vol. 234(C).
    11. Zhu, Chen & Mou, Xiaofeng & Bao, Zewei, 2024. "Optimization of tree-shaped fin structures towards enhanced discharging performance of metal hydride reactor for thermochemical heat storage based on entransy theory," Renewable Energy, Elsevier, vol. 220(C).
    12. Li, Nianqi & Chen, Jian & Cheng, Tao & Klemeš, Jiří Jaromír & Varbanov, Petar Sabev & Wang, Qiuwang & Yang, Weisheng & Liu, Xia & Zeng, Min, 2020. "Analysing thermal-hydraulic performance and energy efficiency of shell-and-tube heat exchangers with longitudinal flow based on experiment and numerical simulation," Energy, Elsevier, vol. 202(C).
    13. Yin, Qian & Du, Wen-Jing & Cheng, Lin, 2017. "Optimization design of heat recovery systems on rotary kilns using genetic algorithms," Applied Energy, Elsevier, vol. 202(C), pages 153-168.
    14. Ewelina Radomska & Lukasz Mika & Karol Sztekler & Lukasz Lis, 2020. "The Impact of Heat Exchangers’ Constructions on the Melting and Solidification Time of Phase Change Materials," Energies, MDPI, vol. 13(18), pages 1-44, September.
    15. Spengler, Fernando Claudio & Oliveski, Rejane De Césaro & Eberhardt, Gabriel Eduardo Strohm, 2022. "Effect of proportions of fins with radial branches on the lauric acid melting process in an annular cavity," Energy, Elsevier, vol. 255(C).
    16. Liu, Zichu & Quan, Zhenhua & Zhao, Yaohua & Jing, Heran & Wang, Lincheng & Liu, Xin, 2022. "Numerical research on the solidification heat transfer characteristics of ice thermal storage device based on a compact multichannel flat tube-closed rectangular fin heat exchanger," Energy, Elsevier, vol. 239(PD).
    17. Huang, Yongping & Yao, Feng & Liu, Xiangdong, 2021. "Numerical study on the thermal enhancement of horizontal latent heat storage units with hierarchical fins," Renewable Energy, Elsevier, vol. 180(C), pages 383-397.
    18. Zhao, B.C. & Wang, R.Z., 2020. "A novel 3-D model of an industrial-scale tube-fin latent heat storage using salt hydrates with supercooling: A model validation," Energy, Elsevier, vol. 213(C).
    19. Liu, Yang & Zheng, Ruowei & Li, Ji, 2022. "High latent heat phase change materials (PCMs) with low melting temperature for thermal management and storage of electronic devices and power batteries: Critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 168(C).
    20. Adrian Bejan, 2020. "Discipline in Thermodynamics," Energies, MDPI, vol. 13(10), pages 1-8, May.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:219:y:2023:i:p1:s0960148123013782. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.