IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v217y2023ics0960148123010686.html
   My bibliography  Save this article

Design and experimental analysis of a parallel-flow photovoltaic-thermal air collector with finned latent heat thermal energy storage unit

Author

Listed:
  • Gürbüz, Emine Yağız
  • Şahinkesen, İstemihan
  • Tuncer, Azim Doğuş
  • Keçebaş, Ali

Abstract

In this work, it is aimed to improve the performance of a photovoltaic-thermal (PVT) air collector using finned latent heat thermal energy storage unit. In this regard, four different types of parallel-flow PVT (PPVT) systems have been designed, manufactured and tested including a conventional PPVT, a PPVT with paraffin-based thermal energy storage unit, a PPVT with 3-finned storage unit and a PPVT with 6-finned storage unit. A parallel-flow collector geometry has been designed to convey excess heat from both surfaces of the photovoltaic panel in the systems. Moreover, the effect of increasing the number of fins in the storage system in the PPVT on the performance has been analyzed within the scope of this work and the developed systems have been tested simultaneously. According to the experimentally obtained findings, overall efficiency value of the PPVT was improved from 55.83% to 76.79% using thermal energy storage with 6-fins. The performance ratio and sustainability index values were obtained between 0.64-0.76 and 1.0277–1.0474, respectively. Enviro-economic analysis has been performed and payback periods of the systems were attained between 0.991 and 1.146 years. Also, employing 6-finned storage unit in the PPVT upgraded the annual carbon dioxide savings as 33.71% in comparison to the unmodified PPVT.

Suggested Citation

  • Gürbüz, Emine Yağız & Şahinkesen, İstemihan & Tuncer, Azim Doğuş & Keçebaş, Ali, 2023. "Design and experimental analysis of a parallel-flow photovoltaic-thermal air collector with finned latent heat thermal energy storage unit," Renewable Energy, Elsevier, vol. 217(C).
    • Handle: RePEc:eee:renene:v:217:y:2023:i:c:s0960148123010686
    DOI: 10.1016/j.renene.2023.119154
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148123010686
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2023.119154?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Cui, Yuanlong & Zhu, Jie & Zhang, Fan & Shao, Yiming & Xue, Yibing, 2022. "Current status and future development of hybrid PV/T system with PCM module: 4E (energy, exergy, economic and environmental) assessments," Renewable and Sustainable Energy Reviews, Elsevier, vol. 158(C).
    2. Afshari, Faraz & Mandev, Emre & Muratçobanoğlu, Burak & Yetim, Ali Fatih & Ceviz, Mehmet Akif, 2023. "Experimental and numerical study on a novel fanless air-to-air solar thermoelectric refrigerator equipped with boosted heat exchanger," Renewable Energy, Elsevier, vol. 207(C), pages 253-265.
    3. Çiftçi, Erdem & Khanlari, Ataollah & Sözen, Adnan & Aytaç, İpek & Tuncer, Azim Doğuş, 2021. "Energy and exergy analysis of a photovoltaic thermal (PVT) system used in solar dryer: A numerical and experimental investigation," Renewable Energy, Elsevier, vol. 180(C), pages 410-423.
    4. Abadeh, Abazar & Rejeb, Oussama & Sardarabadi, Mohammad & Menezo, Christophe & Passandideh-Fard, Mohammad & Jemni, Abdelmajid, 2018. "Economic and environmental analysis of using metal-oxides/water nanofluid in photovoltaic thermal systems (PVTs)," Energy, Elsevier, vol. 159(C), pages 1234-1243.
    5. Nižetić, Sandro & Jurčević, Mišo & Čoko, Duje & Arıcı, Müslüm, 2021. "A novel and effective passive cooling strategy for photovoltaic panel," Renewable and Sustainable Energy Reviews, Elsevier, vol. 145(C).
    6. Chow, T.T. & Pei, G. & Fong, K.F. & Lin, Z. & Chan, A.L.S. & Ji, J., 2009. "Energy and exergy analysis of photovoltaic-thermal collector with and without glass cover," Applied Energy, Elsevier, vol. 86(3), pages 310-316, March.
    7. Ceylin Şirin & Fatih Selimefendigil & Hakan Fehmi Öztop, 2023. "Performance Analysis and Identification of an Indirect Photovoltaic Thermal Dryer with Aluminum Oxide Nano-Embedded Thermal Energy Storage Modification," Sustainability, MDPI, vol. 15(3), pages 1-27, January.
    8. Azim Doğuş Tuncer & Emine Yağız Gürbüz & Ali Keçebaş & Aleksandar G. Georgiev, 2023. "Experimental Evaluation of a Photovoltaic/Thermal Air Heater with Metal Mesh-Integrated Thermal Energy Storage System," Energies, MDPI, vol. 16(8), pages 1-19, April.
    9. Selimefendigil, Fatih & Bayrak, Fatih & Oztop, Hakan F., 2018. "Experimental analysis and dynamic modeling of a photovoltaic module with porous fins," Renewable Energy, Elsevier, vol. 125(C), pages 193-205.
    10. Erdem Cuce & Tulin Bali & Suphi Anil Sekucoglu, 2011. "Effects of passive cooling on performance of silicon photovoltaic cells," International Journal of Low-Carbon Technologies, Oxford University Press, vol. 6(4), pages 299-308, July.
    11. Kazemian, Arash & Khatibi, Meysam & Ma, Tao & Peng, Jinqing & Hongxing, Yang, 2023. "A thermal performance-enhancing strategy of photovoltaic thermal systems by applying surface area partially covered by solar cells," Applied Energy, Elsevier, vol. 329(C).
    12. Shakibi, Hamid & Shokri, Afshar & Sobhani, Behnam & Yari, Mortaza, 2023. "Numerical analysis and optimization of a novel photovoltaic thermal solar unit improved by Nano-PCM as an energy storage media and finned collector," Renewable and Sustainable Energy Reviews, Elsevier, vol. 179(C).
    13. Qiu, Zhongzhu & Zhao, Xudong & Li, Peng & Zhang, Xingxing & Ali, Samira & Tan, Junyi, 2015. "Theoretical investigation of the energy performance of a novel MPCM (Microencapsulated Phase Change Material) slurry based PV/T module," Energy, Elsevier, vol. 87(C), pages 686-698.
    14. Ahmed, Omer Khalil & Mohammed, Zala Aziz, 2017. "Influence of porous media on the performance of hybrid PV/Thermal collector," Renewable Energy, Elsevier, vol. 112(C), pages 378-387.
    15. Rosa-Clot, M. & Rosa-Clot, P. & Tina, G.M. & Scandura, P.F., 2010. "Submerged photovoltaic solar panel: SP2," Renewable Energy, Elsevier, vol. 35(8), pages 1862-1865.
    16. Barone, Giovanni & Buonomano, Annamaria & Forzano, Cesare & Palombo, Adolfo & Panagopoulos, Orestis, 2019. "Photovoltaic thermal collectors: Experimental analysis and simulation model of an innovative low-cost water-based prototype," Energy, Elsevier, vol. 179(C), pages 502-516.
    17. M. Granström & K. Petritsch & A. C. Arias & A. Lux & M. R. Andersson & R. H. Friend, 1998. "Laminated fabrication of polymeric photovoltaic diodes," Nature, Nature, vol. 395(6699), pages 257-260, September.
    18. Park, S.R. & Pandey, A.K. & Tyagi, V.V. & Tyagi, S.K., 2014. "Energy and exergy analysis of typical renewable energy systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 30(C), pages 105-123.
    19. MD Shouquat Hossain & Laveet Kumar & Adeel Arshad & Jeyraj Selvaraj & A. K. Pandey & Nasrudin Abd Rahim, 2023. "A Comparative Investigation on Solar PVT- and PVT-PCM-Based Collector Constancy Performance," Energies, MDPI, vol. 16(5), pages 1-26, February.
    20. Tripathy, M. & Joshi, H. & Panda, S.K., 2017. "Energy payback time and life-cycle cost analysis of building integrated photovoltaic thermal system influenced by adverse effect of shadow," Applied Energy, Elsevier, vol. 208(C), pages 376-389.
    21. Khanlari, Ataollah & Sözen, Adnan & Afshari, Faraz & Tuncer, Azim Doğuş, 2021. "Energy-exergy and sustainability analysis of a PV-driven quadruple-flow solar drying system," Renewable Energy, Elsevier, vol. 175(C), pages 1151-1166.
    22. Wang, Zhangyuan & Qiu, Feng & Yang, Wansheng & Zhao, Xudong & Mei, Sheng, 2016. "Experimental investigation of the thermal and electrical performance of the heat pipe BIPV/T system with metal wires," Applied Energy, Elsevier, vol. 170(C), pages 314-323.
    23. Riggs, Brian C. & Biedenharn, Richard & Dougher, Christopher & Ji, Yaping Vera & Xu, Qi & Romanin, Vince & Codd, Daniel S. & Zahler, James M. & Escarra, Matthew D., 2017. "Techno-economic analysis of hybrid PV/T systems for process heat using electricity to subsidize the cost of heat," Applied Energy, Elsevier, vol. 208(C), pages 1370-1378.
    24. Yazdanifard, Farideh & Ebrahimnia-Bajestan, Ehsan & Ameri, Mehran, 2016. "Investigating the performance of a water-based photovoltaic/thermal (PV/T) collector in laminar and turbulent flow regime," Renewable Energy, Elsevier, vol. 99(C), pages 295-306.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Karkaba, H. & Etienne, L. & Pelay, U. & Russeil, S. & Simo tala, J. & Boonaert, J. & Lecoeuche, S. & Bougeard, D., 2023. "Performance improvement of air cooled photo-voltaic thermal panel using economic model predictive control and vortex generators," Renewable Energy, Elsevier, vol. 218(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Khanlari, Ataollah & Tuncer, Azim Doğuş, 2023. "Analysis of an infrared-assisted triple-flow prototype solar drying system with nano-embedded absorber coating: An experimental and numerical study," Renewable Energy, Elsevier, vol. 216(C).
    2. Çiftçi, Erdem & Khanlari, Ataollah & Sözen, Adnan & Aytaç, İpek & Tuncer, Azim Doğuş, 2021. "Energy and exergy analysis of a photovoltaic thermal (PVT) system used in solar dryer: A numerical and experimental investigation," Renewable Energy, Elsevier, vol. 180(C), pages 410-423.
    3. Azim Doğuş Tuncer & Emine Yağız Gürbüz & Ali Keçebaş & Aleksandar G. Georgiev, 2023. "Experimental Evaluation of a Photovoltaic/Thermal Air Heater with Metal Mesh-Integrated Thermal Energy Storage System," Energies, MDPI, vol. 16(8), pages 1-19, April.
    4. Das, Dudul & Kalita, Pankaj & Roy, Omkar, 2018. "Flat plate hybrid photovoltaic- thermal (PV/T) system: A review on design and development," Renewable and Sustainable Energy Reviews, Elsevier, vol. 84(C), pages 111-130.
    5. Kazemian, Arash & Hosseinzadeh, Mohammad & Sardarabadi, Mohammad & Passandideh-Fard, Mohammad, 2018. "Experimental study of using both ethylene glycol and phase change material as coolant in photovoltaic thermal systems (PVT) from energy, exergy and entropy generation viewpoints," Energy, Elsevier, vol. 162(C), pages 210-223.
    6. Tuncer, Azim Doğuş & Khanlari, Ataollah, 2023. "Improving the performance of a triple-flow solar air collector using recyclable aluminum cans as extended heat transfer surfaces: An energetic, exergetic, economic and environmental survey," Energy, Elsevier, vol. 282(C).
    7. Al-Amri, Fahad & Saeed, Farooq & Mujeebu, Muhammad Abdul, 2022. "Novel dual-function racking structure for passive cooling of solar PV panels –thermal performance analysis," Renewable Energy, Elsevier, vol. 198(C), pages 100-113.
    8. Sardarabadi, Mohammad & Hosseinzadeh, Mohammad & Kazemian, Arash & Passandideh-Fard, Mohammad, 2017. "Experimental investigation of the effects of using metal-oxides/water nanofluids on a photovoltaic thermal system (PVT) from energy and exergy viewpoints," Energy, Elsevier, vol. 138(C), pages 682-695.
    9. Ceylin Şirin & Fatih Selimefendigil & Hakan Fehmi Öztop, 2023. "Performance Analysis and Identification of an Indirect Photovoltaic Thermal Dryer with Aluminum Oxide Nano-Embedded Thermal Energy Storage Modification," Sustainability, MDPI, vol. 15(3), pages 1-27, January.
    10. Tian, Xinyi & Wang, Jun & Wang, Chuyao & Ji, Jie, 2023. "Comparison analysis of the glazed and unglazed curved water-based PV/T roofs in the non-heating season," Renewable Energy, Elsevier, vol. 205(C), pages 899-917.
    11. Islam, M.M. & Hasanuzzaman, M. & Rahim, N.A. & Pandey, A.K. & Rawa, M. & Kumar, L., 2021. "Real time experimental performance investigation of a NePCM based photovoltaic thermal system: An energetic and exergetic approach," Renewable Energy, Elsevier, vol. 172(C), pages 71-87.
    12. Pang, Wei & Cui, Yanan & Zhang, Qian & Wilson, Gregory.J. & Yan, Hui, 2020. "A comparative analysis on performances of flat plate photovoltaic/thermal collectors in view of operating media, structural designs, and climate conditions," Renewable and Sustainable Energy Reviews, Elsevier, vol. 119(C).
    13. Shahsavar, Amin & Alwaeli, Ali H.A. & Azimi, Neda & Rostami, Shirin & Sopian, Kamaruzzaman & Arıcı, Müslüm & Estellé, Patrice & Nižetić, Sandro & Kasaeian, Alibakhsh & Ali, Hafiz Muhammad & Ma, Zhenju, 2022. "Exergy studies in water-based and nanofluid-based photovoltaic/thermal collectors: Status and prospects," Renewable and Sustainable Energy Reviews, Elsevier, vol. 168(C).
    14. Chen, Heng & Mansir, Ibrahim B. & Chauhan, Bhupendra Singh & Al-Zahrani, Ahmed & Deifalla, Ahmed & Hua, Yinhai & Peng, Fan, 2023. "A comprehensive numerical study on the effectiveness of a rotational-based PTC collector integrated porous foam and PV module," Renewable Energy, Elsevier, vol. 215(C).
    15. Chen, Haiping & Zhang, Heng & Li, Mingjie & Liu, Haowen & Huang, Jiguang, 2018. "Experimental investigation of a novel LCPV/T system with micro-channel heat pipe array," Renewable Energy, Elsevier, vol. 115(C), pages 773-782.
    16. Kazemian, Arash & Ma, Tao & Hongxing, Yang, 2024. "Evaluation of various collector configurations for a photovoltaic thermal system to achieve high performance, low cost, and lightweight," Applied Energy, Elsevier, vol. 357(C).
    17. Hosseinzadeh, Mohammad & Sardarabadi, Mohammad & Passandideh-Fard, Mohammad, 2018. "Energy and exergy analysis of nanofluid based photovoltaic thermal system integrated with phase change material," Energy, Elsevier, vol. 147(C), pages 636-647.
    18. Liu, Liu & Niu, Jianlei & Wu, Jian-Yong, 2023. "Improving energy efficiency of photovoltaic/thermal systems by cooling with PCM nano-emulsions: An indoor experimental study," Renewable Energy, Elsevier, vol. 203(C), pages 568-582.
    19. Chen, J.F. & Zhang, L. & Dai, Y.J., 2018. "Performance analysis and multi-objective optimization of a hybrid photovoltaic/thermal collector for domestic hot water application," Energy, Elsevier, vol. 143(C), pages 500-516.
    20. Kumar, Laveet & Hasanuzzaman, M. & Rahim, N.A. & Islam, M.M., 2021. "Modeling, simulation and outdoor experimental performance analysis of a solar-assisted process heating system for industrial process heat," Renewable Energy, Elsevier, vol. 164(C), pages 656-673.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:217:y:2023:i:c:s0960148123010686. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.