IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v197y2022icp1081-1093.html
   My bibliography  Save this article

Modelled annual thermal performance of a 50MWth refractory-lined particle-laden solar receiver operating above 1000°C

Author

Listed:
  • Rafique, Muhammad M.
  • Nathan, Graham
  • Saw, Woei

Abstract

The paper reports on the thermal performance of the sub-system for a solar thermal particle technology used to generate high temperature air, including refractory-lined particle-laden receiver, particle separator, particle storage and particle feeder. These assessments are made with a transient mathematical model developed to calculate the heat and mass transfer within the cavity of the receiver together with the thermal losses to the surroundings, incorporating the influence of solar transients during start-up, turndown or shutdown periods. New insights are provided of the influences of the variables of refractory configuration and of the potential operating controller parameters to manage the influence of solar variability on the annual thermal performance of the system, considering the useful thermal gain of hot air. The model is further used to advance the understanding of the sensitivity of the thermal performance to the mass flow rate of inlet air and mass loading of particles in the receiver on the sensible energy harnessed. The influence of the returned air temperature on the receiver thermal performance is also assessed, to provide insights on the suitability of the present configuration to re-heat already hot air in a CST system. Further to this, the thermal outputs are compared with available CFD data for this configuration, and with that reported for a cavity reactor, to provide information on the model validation.

Suggested Citation

  • Rafique, Muhammad M. & Nathan, Graham & Saw, Woei, 2022. "Modelled annual thermal performance of a 50MWth refractory-lined particle-laden solar receiver operating above 1000°C," Renewable Energy, Elsevier, vol. 197(C), pages 1081-1093.
  • Handle: RePEc:eee:renene:v:197:y:2022:i:c:p:1081-1093
    DOI: 10.1016/j.renene.2022.07.111
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148122011144
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.renene.2022.07.111?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Rafique, Muhammad M. & Nathan, Graham & Saw, Woei, 2021. "A mathematical model to assess the influence of transients on a refractory-lined solar receiver," Renewable Energy, Elsevier, vol. 167(C), pages 217-235.
    2. Zhang, Huili & Benoit, Hadrien & Perez-Lopèz, Inmaculada & Flamant, Gilles & Tan, Tianwei & Baeyens, Jan, 2017. "High-efficiency solar power towers using particle suspensions as heat carrier in the receiver and in the thermal energy storage," Renewable Energy, Elsevier, vol. 111(C), pages 438-446.
    3. Ho, Clifford K. & Iverson, Brian D., 2014. "Review of high-temperature central receiver designs for concentrating solar power," Renewable and Sustainable Energy Reviews, Elsevier, vol. 29(C), pages 835-846.
    4. Merchán, R.P. & Santos, M.J. & Medina, A. & Calvo Hernández, A., 2022. "High temperature central tower plants for concentrated solar power: 2021 overview," Renewable and Sustainable Energy Reviews, Elsevier, vol. 155(C).
    5. Godini, Ali & Kheradmand, Saeid, 2021. "Optimization of volumetric solar receiver geometry and porous media specifications," Renewable Energy, Elsevier, vol. 172(C), pages 574-581.
    6. Xie, Xiangyu & Xu, Haoran & Gan, Di & Ni, Mingjiang & Yan, Jianhua & Cen, Kefa & Xiao, Gang, 2022. "A sliding-bed particle solar receiver with controlling particle flow velocity for high-temperature thermal power generation," Renewable Energy, Elsevier, vol. 183(C), pages 41-50.
    7. Tan, Taide & Chen, Yitung, 2010. "Review of study on solid particle solar receivers," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(1), pages 265-276, January.
    8. Nakakura, Mitsuho & Matsubara, Koji & Bellan, Selvan & Kodama, Tatsuya, 2020. "Direct simulation of a volumetric solar receiver with different cell sizes at high outlet temperatures (1,000–1,500 °C)," Renewable Energy, Elsevier, vol. 146(C), pages 1143-1152.
    9. Brantley H. Mills & Clifford K. Ho & Nathaniel R. Schroeder & Reid Shaeffer & Hendrik F. Laubscher & Kevin J. Albrecht, 2022. "Design Evaluation of a Next-Generation High-Temperature Particle Receiver for Concentrating Solar Thermal Applications," Energies, MDPI, vol. 15(5), pages 1-20, February.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Arias, I. & Cardemil, J. & Zarza, E. & Valenzuela, L. & Escobar, R., 2022. "Latest developments, assessments and research trends for next generation of concentrated solar power plants using liquid heat transfer fluids," Renewable and Sustainable Energy Reviews, Elsevier, vol. 168(C).
    2. Gimeno-Furio, A. & Hernandez, L. & Martinez-Cuenca, R. & Mondragón, R. & Vela, A. & Cabedo, L. & Barreneche, C. & Iacob, M., 2020. "New coloured coatings to enhance silica sand absorbance for direct particle solar receiver applications," Renewable Energy, Elsevier, vol. 152(C), pages 1-8.
    3. Avila-Marin, Antonio L. & Fernandez-Reche, Jesus & Carballo, Jose Antonio & Carra, Maria Elena & Gianella, Sandro & Ferrari, Luca & Sanchez-Señoran, Daniel, 2022. "CFD analysis of the performance impact of geometrical shape on volumetric absorbers in a standard cup," Renewable Energy, Elsevier, vol. 201(P1), pages 256-272.
    4. Conroy, Tim & Collins, Maurice N. & Grimes, Ronan, 2020. "A review of steady-state thermal and mechanical modelling on tubular solar receivers," Renewable and Sustainable Energy Reviews, Elsevier, vol. 119(C).
    5. Calderón, Alejandro & Palacios, Anabel & Barreneche, Camila & Segarra, Mercè & Prieto, Cristina & Rodriguez-Sanchez, Alfonso & Fernández, A. Inés, 2018. "High temperature systems using solid particles as TES and HTF material: A review," Applied Energy, Elsevier, vol. 213(C), pages 100-111.
    6. Avila-Marin, Antonio L. & Fernandez-Reche, Jesus & Gianella, Sandro & Ferrari, Luca & Sanchez-Señoran, Daniel, 2022. "Experimental study of innovative periodic cellular structures as air volumetric absorbers," Renewable Energy, Elsevier, vol. 184(C), pages 391-404.
    7. Zhang, Huili & Kong, Weibin & Tan, Tianwei & Baeyens, Jan, 2017. "High-efficiency concentrated solar power plants need appropriate materials for high-temperature heat capture, conveying and storage," Energy, Elsevier, vol. 139(C), pages 52-64.
    8. Lucía Arribas & José González-Aguilar & Manuel Romero, 2018. "Solar-Driven Thermochemical Water-Splitting by Cerium Oxide: Determination of Operational Conditions in a Directly Irradiated Fixed Bed Reactor," Energies, MDPI, vol. 11(9), pages 1-15, September.
    9. Brantley H. Mills & Clifford K. Ho & Nathaniel R. Schroeder & Reid Shaeffer & Hendrik F. Laubscher & Kevin J. Albrecht, 2022. "Design Evaluation of a Next-Generation High-Temperature Particle Receiver for Concentrating Solar Thermal Applications," Energies, MDPI, vol. 15(5), pages 1-20, February.
    10. Rafique, Muhammad M. & Nathan, Graham & Saw, Woei, 2021. "A mathematical model to assess the influence of transients on a refractory-lined solar receiver," Renewable Energy, Elsevier, vol. 167(C), pages 217-235.
    11. Matthew L. Bauer, 2022. "De-Risking Solar Receivers to Achieve SunShot Targets," Energies, MDPI, vol. 15(7), pages 1-13, March.
    12. Li Wang & Long Yang & Junjie Liu & Pei Wang, 2021. "Study on Spectral Radiative Heat Transfer Characteristics of a Windowed Receiver with Particle Curtain," Energies, MDPI, vol. 14(10), pages 1-16, May.
    13. Ingenhoven, Philip & Lee, Leok & Saw, Woei & Rafique, Muhammad Mujahid & Potter, Daniel & Nathan, Graham J., 2023. "Techno-economic assessment from a transient simulation of a concentrated solar thermal plant to deliver high-temperature industrial process heat," Renewable and Sustainable Energy Reviews, Elsevier, vol. 185(C).
    14. Akba, Tufan & Baker, Derek & Mengüç, M. Pınar, 2023. "Gradient-based optimization of micro-scale pressurized volumetric receiver geometry and flow rate," Renewable Energy, Elsevier, vol. 203(C), pages 741-752.
    15. Godini, Ali & Kheradmand, Saeid, 2021. "Optimization of volumetric solar receiver geometry and porous media specifications," Renewable Energy, Elsevier, vol. 172(C), pages 574-581.
    16. Wang, Yanjuan & Li, Yi & Zhu, Zheng & Chen, Zhewen & Xu, Jinliang, 2024. "Thermal-hydraulic-structural analysis and optimization of supercritical CO2 solar tower receiver," Energy, Elsevier, vol. 293(C).
    17. Tawfik, Mohamed, 2022. "A review of directly irradiated solid particle receivers: Technologies and influencing parameters," Renewable and Sustainable Energy Reviews, Elsevier, vol. 167(C).
    18. Rovense, Francesco & Reyes-Belmonte, Miguel Ángel & Romero, Manuel & González-Aguilar, José, 2022. "Thermo-economic analysis of a particle-based multi-tower solar power plant using unfired combined cycle for evening peak power generation," Energy, Elsevier, vol. 240(C).
    19. Okoroigwe, Edmund & Madhlopa, Amos, 2016. "An integrated combined cycle system driven by a solar tower: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 57(C), pages 337-350.
    20. Ma, Xiaojing & Xu, Jinliang & Xie, Jian, 2021. "In-situ phase separation to improve phase change heat transfer performance," Energy, Elsevier, vol. 230(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:197:y:2022:i:c:p:1081-1093. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.