IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v160y2020icp788-802.html
   My bibliography  Save this article

Assessment of blade element momentum codes under varying turbulence levels by comparing with blade resolved computational fluid dynamics

Author

Listed:
  • Kim, Yusik
  • Madsen, Helge Aa
  • Aparicio-Sanchez, Maria
  • Pirrung, Georg
  • Lutz, Thorsten

Abstract

Unsteady load calculations for a large wind turbine using two blade element momentum (BEM) codes (FAST, HAWC2) are compared with results from blade resolved computational fluid dynamics simulations (FLOWer). This is to assess the performance of BEM under varying turbulence levels. Instantaneous and mean of power, spectral data and sectional blade forces are analysed for the three codes. The AVATAR research turbine with a radius of 102.88 m is used in this study. Based on comparisons, FLOWer and HAWC2 show a very close trend in mean power variations with different turbulence intensities. In contrast, FAST does not show a similar trend. This is conjectured to be due to different implementation in the BEM codes of the unsteady turbulence inflows, such as azimuthal variation of induction and dynamic inflow. The maximum error of CP is 6% for FAST and 1% for HAWC2 compared to FLOWer.

Suggested Citation

  • Kim, Yusik & Madsen, Helge Aa & Aparicio-Sanchez, Maria & Pirrung, Georg & Lutz, Thorsten, 2020. "Assessment of blade element momentum codes under varying turbulence levels by comparing with blade resolved computational fluid dynamics," Renewable Energy, Elsevier, vol. 160(C), pages 788-802.
  • Handle: RePEc:eee:renene:v:160:y:2020:i:c:p:788-802
    DOI: 10.1016/j.renene.2020.06.006
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148120308995
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.renene.2020.06.006?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Kim, Taeseong & Hansen, Anders M. & Branner, Kim, 2013. "Development of an anisotropic beam finite element for composite wind turbine blades in multibody system," Renewable Energy, Elsevier, vol. 59(C), pages 172-183.
    2. Li, Y. & Castro, A.M. & Sinokrot, T. & Prescott, W. & Carrica, P.M., 2015. "Coupled multi-body dynamics and CFD for wind turbine simulation including explicit wind turbulence," Renewable Energy, Elsevier, vol. 76(C), pages 338-361.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Bangga, Galih & Lutz, Thorsten, 2021. "Aerodynamic modeling of wind turbine loads exposed to turbulent inflow and validation with experimental data," Energy, Elsevier, vol. 223(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Li, Y. & Castro, A.M. & Martin, J.E. & Sinokrot, T. & Prescott, W. & Carrica, P.M., 2017. "Coupled computational fluid dynamics/multibody dynamics method for wind turbine aero-servo-elastic simulation including drivetrain dynamics," Renewable Energy, Elsevier, vol. 101(C), pages 1037-1051.
    2. Meng, Hang & Lien, Fue-Sang & Yee, Eugene & Shen, Jingfang, 2020. "Modelling of anisotropic beam for rotating composite wind turbine blade by using finite-difference time-domain (FDTD) method," Renewable Energy, Elsevier, vol. 162(C), pages 2361-2379.
    3. Zhou, Yang & Xiao, Qing & Liu, Yuanchuan & Incecik, Atilla & Peyrard, Christophe & Wan, Decheng & Pan, Guang & Li, Sunwei, 2022. "Exploring inflow wind condition on floating offshore wind turbine aerodynamic characterisation and platform motion prediction using blade resolved CFD simulation," Renewable Energy, Elsevier, vol. 182(C), pages 1060-1079.
    4. Huang, Haoda & Liu, Qingsong & Yue, Minnan & Miao, Weipao & Wang, Peilin & Li, Chun, 2023. "Fully coupled aero-hydrodynamic analysis of a biomimetic fractal semi-submersible floating offshore wind turbine under wind-wave excitation conditions," Renewable Energy, Elsevier, vol. 203(C), pages 280-300.
    5. Pavese, Christian & Kim, Taeseong & Murcia, Juan Pablo, 2017. "Design of a wind turbine swept blade through extensive load analysis," Renewable Energy, Elsevier, vol. 102(PA), pages 21-34.
    6. Liew, Jaime & Lio, Wai Hou & Urbán, Albert Meseguer & Holierhoek, Jessica & Kim, Taeseong, 2020. "Active tip deflection control for wind turbines," Renewable Energy, Elsevier, vol. 149(C), pages 445-454.
    7. Shah, Owaisur Rahman & Tarfaoui, Mostapha, 2016. "The identification of structurally sensitive zones subject to failure in a wind turbine blade using nodal displacement based finite element sub-modeling," Renewable Energy, Elsevier, vol. 87(P1), pages 168-181.
    8. Sessarego, Matias & Feng, Ju & Ramos-García, Néstor & Horcas, Sergio González, 2020. "Design optimization of a curved wind turbine blade using neural networks and an aero-elastic vortex method under turbulent inflow," Renewable Energy, Elsevier, vol. 146(C), pages 1524-1535.
    9. Bei Li & De Tian & Xiaoxuan Wu & Huiwen Meng & Yi Su, 2023. "The Impact of Bend–Twist Coupling on Structural Characteristics and Flutter Limit of Ultra-Long Flexible Wind Turbine Composite Blades," Energies, MDPI, vol. 16(15), pages 1-20, August.
    10. Ozan Gözcü & Taeseong Kim & David Robert Verelst & Michael K. McWilliam, 2022. "Swept Blade Dynamic Investigations for a 100 kW Small Wind Turbine," Energies, MDPI, vol. 15(9), pages 1-22, April.
    11. Ebrahimi, Abbas & Sekandari, Mahmood, 2018. "Transient response of the flexible blade of horizontal-axis wind turbines in wind gusts and rapid yaw changes," Energy, Elsevier, vol. 145(C), pages 261-275.
    12. Tran, Thanh Toan & Kim, Dong-Hyun, 2016. "Fully coupled aero-hydrodynamic analysis of a semi-submersible FOWT using a dynamic fluid body interaction approach," Renewable Energy, Elsevier, vol. 92(C), pages 244-261.
    13. Gilberto Santo & Mathijs Peeters & Wim Van Paepegem & Joris Degroote, 2019. "Numerical Investigation of the Effect of Tower Dam and Rotor Misalignment on Performance and Loads of a Large Wind Turbine in the Atmospheric Boundary Layer," Energies, MDPI, vol. 12(7), pages 1-19, March.
    14. Kim, T. & Madsen, F.J. & Bredmose, H. & Pegalajar-Jurado, A., 2023. "Numerical analysis and comparison study of the 1:60 scaled DTU 10 MW TLP floating wind turbine," Renewable Energy, Elsevier, vol. 202(C), pages 210-221.
    15. Zhang, Dongqin & Liu, Zhenqing & Li, Weipeng & Hu, Gang, 2023. "LES simulation study of wind turbine aerodynamic characteristics with fluid-structure interaction analysis considering blade and tower flexibility," Energy, Elsevier, vol. 282(C).
    16. Della Posta, Giacomo & Leonardi, Stefano & Bernardini, Matteo, 2022. "A two-way coupling method for the study of aeroelastic effects in large wind turbines," Renewable Energy, Elsevier, vol. 190(C), pages 971-992.
    17. Thé, Jesse & Yu, Hesheng, 2017. "A critical review on the simulations of wind turbine aerodynamics focusing on hybrid RANS-LES methods," Energy, Elsevier, vol. 138(C), pages 257-289.
    18. Tran, Thanh Toan & Kim, Dong-Hyun, 2016. "A CFD study into the influence of unsteady aerodynamic interference on wind turbine surge motion," Renewable Energy, Elsevier, vol. 90(C), pages 204-228.
    19. Quallen, Sean & Xing, Tao, 2016. "CFD simulation of a floating offshore wind turbine system using a variable-speed generator-torque controller," Renewable Energy, Elsevier, vol. 97(C), pages 230-242.
    20. Wang, Lin & Liu, Xiongwei & Kolios, Athanasios, 2016. "State of the art in the aeroelasticity of wind turbine blades: Aeroelastic modelling," Renewable and Sustainable Energy Reviews, Elsevier, vol. 64(C), pages 195-210.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:160:y:2020:i:c:p:788-802. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.