IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v149y2020icp445-454.html
   My bibliography  Save this article

Active tip deflection control for wind turbines

Author

Listed:
  • Liew, Jaime
  • Lio, Wai Hou
  • Urbán, Albert Meseguer
  • Holierhoek, Jessica
  • Kim, Taeseong

Abstract

This paper studies the use of blade tip sensors for load reductions and blade-tower clearance control. Typically, modern blade tip sensors measure flapwise tip deflection distances at a high sampling rate, and such measurements can be utilised as feedback signals for control operations. Thus, this paper proposes a novel blade pitch control design based on the tip deflection measurements and individual pitch control (IPC). Firstly, an IPC system design is presented, using the tip deflection measurements to alleviate turbine fatigue loads caused by differential loads such as wind shear, yaw misalignment and turbulence. Secondly, a novel implementation of IPC with tip trajectory tracking feature is proposed where the blade tips are guided along a fixed trajectory to maximise blade-tower clearance. The motivation of this implementation is to reduce the chance of blade-tower interactions for large and flexible rotors. The presented controller is implemented in HAWC2, and high fidelity load measurements are produced using the DTU10MW reference wind turbine. The simulation results showed that the fatigue damage reduction on key turbine components and the improved blade-tower clearance can be achieved simultaneously. Lifetime equivalent load reductions were seen in both rotating and fixed frame components under the normal operating conditions.

Suggested Citation

  • Liew, Jaime & Lio, Wai Hou & Urbán, Albert Meseguer & Holierhoek, Jessica & Kim, Taeseong, 2020. "Active tip deflection control for wind turbines," Renewable Energy, Elsevier, vol. 149(C), pages 445-454.
    • Handle: RePEc:eee:renene:v:149:y:2020:i:c:p:445-454
    DOI: 10.1016/j.renene.2019.12.036
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148119319081
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2019.12.036?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Bottasso, C.L. & Croce, A. & Riboldi, C.E.D. & Nam, Y., 2013. "Multi-layer control architecture for the reduction of deterministic and non-deterministic loads on wind turbines," Renewable Energy, Elsevier, vol. 51(C), pages 159-169.
    2. Kim, Taeseong & Hansen, Anders M. & Branner, Kim, 2013. "Development of an anisotropic beam finite element for composite wind turbine blades in multibody system," Renewable Energy, Elsevier, vol. 59(C), pages 172-183.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. López-Queija, Javier & Robles, Eider & Jugo, Josu & Alonso-Quesada, Santiago, 2022. "Review of control technologies for floating offshore wind turbines," Renewable and Sustainable Energy Reviews, Elsevier, vol. 167(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Meng, Hang & Lien, Fue-Sang & Yee, Eugene & Shen, Jingfang, 2020. "Modelling of anisotropic beam for rotating composite wind turbine blade by using finite-difference time-domain (FDTD) method," Renewable Energy, Elsevier, vol. 162(C), pages 2361-2379.
    2. Pavese, Christian & Kim, Taeseong & Murcia, Juan Pablo, 2017. "Design of a wind turbine swept blade through extensive load analysis," Renewable Energy, Elsevier, vol. 102(PA), pages 21-34.
    3. Chen, Z.J. & Stol, K.A. & Mace, B.R., 2017. "Wind turbine blade optimisation with individual pitch and trailing edge flap control," Renewable Energy, Elsevier, vol. 103(C), pages 750-765.
    4. Xu, Jin & Zhang, Lei & Li, Xue & Li, Shuang & Yang, Ke, 2020. "A study of dynamic response of a wind turbine blade based on the multi-body dynamics method," Renewable Energy, Elsevier, vol. 155(C), pages 358-368.
    5. Kang, Yujoo & Kim, Hyebin & Lee, Sang, 2023. "Benefits of individual pitch control on offshore wind turbine submerged in upstream wake," Renewable Energy, Elsevier, vol. 217(C).
    6. Shah, Owaisur Rahman & Tarfaoui, Mostapha, 2016. "The identification of structurally sensitive zones subject to failure in a wind turbine blade using nodal displacement based finite element sub-modeling," Renewable Energy, Elsevier, vol. 87(P1), pages 168-181.
    7. Sessarego, Matias & Feng, Ju & Ramos-García, Néstor & Horcas, Sergio González, 2020. "Design optimization of a curved wind turbine blade using neural networks and an aero-elastic vortex method under turbulent inflow," Renewable Energy, Elsevier, vol. 146(C), pages 1524-1535.
    8. Novaes Menezes, Eduardo José & Araújo, Alex Maurício & Rohatgi, Janardan Singh & González del Foyo, Pedro Manuel, 2018. "Active load control of large wind turbines using state-space methods and disturbance accommodating control," Energy, Elsevier, vol. 150(C), pages 310-319.
    9. Bei Li & De Tian & Xiaoxuan Wu & Huiwen Meng & Yi Su, 2023. "The Impact of Bend–Twist Coupling on Structural Characteristics and Flutter Limit of Ultra-Long Flexible Wind Turbine Composite Blades," Energies, MDPI, vol. 16(15), pages 1-20, August.
    10. Ozan Gözcü & Taeseong Kim & David Robert Verelst & Michael K. McWilliam, 2022. "Swept Blade Dynamic Investigations for a 100 kW Small Wind Turbine," Energies, MDPI, vol. 15(9), pages 1-22, April.
    11. Kim, T. & Madsen, F.J. & Bredmose, H. & Pegalajar-Jurado, A., 2023. "Numerical analysis and comparison study of the 1:60 scaled DTU 10 MW TLP floating wind turbine," Renewable Energy, Elsevier, vol. 202(C), pages 210-221.
    12. Rezaeiha, Abdolrahim & Pereira, Ricardo & Kotsonis, Marios, 2017. "Fluctuations of angle of attack and lift coefficient and the resultant fatigue loads for a large Horizontal Axis Wind turbine," Renewable Energy, Elsevier, vol. 114(PB), pages 904-916.
    13. Kim, Yusik & Madsen, Helge Aa & Aparicio-Sanchez, Maria & Pirrung, Georg & Lutz, Thorsten, 2020. "Assessment of blade element momentum codes under varying turbulence levels by comparing with blade resolved computational fluid dynamics," Renewable Energy, Elsevier, vol. 160(C), pages 788-802.
    14. Petrović, Vlaho & Jelavić, Mate & Baotić, Mato, 2015. "Advanced control algorithms for reduction of wind turbine structural loads," Renewable Energy, Elsevier, vol. 76(C), pages 418-431.
    15. Njiri, Jackson G. & Söffker, Dirk, 2016. "State-of-the-art in wind turbine control: Trends and challenges," Renewable and Sustainable Energy Reviews, Elsevier, vol. 60(C), pages 377-393.
    16. Hawari, Qusay & Kim, Taeseong & Ward, Christopher & Fleming, James, 2022. "A robust gain scheduling method for a PI collective pitch controller of multi-MW onshore wind turbines," Renewable Energy, Elsevier, vol. 192(C), pages 443-455.
    17. Sang, Le Quang & Takao, Maeda & Kamada, Yasunari & Li, Qing'an, 2017. "Experimental investigation of the cyclic pitch control on a horizontal axis wind turbine in diagonal inflow wind condition," Energy, Elsevier, vol. 134(C), pages 269-278.
    18. Li, Y. & Castro, A.M. & Martin, J.E. & Sinokrot, T. & Prescott, W. & Carrica, P.M., 2017. "Coupled computational fluid dynamics/multibody dynamics method for wind turbine aero-servo-elastic simulation including drivetrain dynamics," Renewable Energy, Elsevier, vol. 101(C), pages 1037-1051.
    19. Lasheen, Ahmed & Elshafei, Abdel Latif, 2016. "Wind-turbine collective-pitch control via a fuzzy predictive algorithm," Renewable Energy, Elsevier, vol. 87(P1), pages 298-306.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:149:y:2020:i:c:p:445-454. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.