IDEAS home Printed from https://ideas.repec.org/a/eee/reensy/v198y2020ics0951832019305034.html
   My bibliography  Save this article

Architectural design and analysis of a steer-by-wire system in view of functional safety concept

Author

Listed:
  • Huang, Chao
  • Li, Liang

Abstract

In the context of intelligent and automated vehicles, drive-by-wire (DBW) systems have aroused wide attention, both in academia and industries. Over the years, a lot of discussion has been made about the architectural design of brake-by-wire (BBW) systems. However, the architectural design of the steer-by-wire (SBW) system hasn’t been emphasized enough, especially in the context of functional safety concept. In view of this, based on the newly released version of ISO 26262:2018 as well as the technical report from National Highway Traffic Safety Administration (NHTSA), a fail-operational architecture for the SBW system is proposed in this paper, following the detailed analysis results of the concept phase as suggested in ISO 26262:2018. Further utilizing state transition diagrams and quantitative fault-tree-analysis (FTA) analysis respectively, detailed qualitative as well well as quantitative analysis results are provided, proving the safety and reliability of the proposed architecture. The aim is to provide guidance as well as some references for the SBW system design and analysis, where the essential problem is safety and reliability of the system, so that safety and reliability of automated vehicles can be guaranteed.

Suggested Citation

  • Huang, Chao & Li, Liang, 2020. "Architectural design and analysis of a steer-by-wire system in view of functional safety concept," Reliability Engineering and System Safety, Elsevier, vol. 198(C).
    • Handle: RePEc:eee:reensy:v:198:y:2020:i:c:s0951832019305034
    DOI: 10.1016/j.ress.2020.106822
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0951832019305034
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ress.2020.106822?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Hayama, Ryouhei & Higashi, Masayasu & Kawahara, Sadahiro & Nakano, Shirou & Kumamoto, Hiromitsu, 2010. "Fault-tolerant automobile steering based on diversity of steer-by-wire, braking and acceleration," Reliability Engineering and System Safety, Elsevier, vol. 95(1), pages 10-17.
    2. Huang, Shuang & Zhou, Chunjie & Yang, Lili & Qin, Yuanqing & Huang, Xiongfeng & Hu, Bowen, 2016. "Transient fault tolerant control for vehicle brake-by-wire systems," Reliability Engineering and System Safety, Elsevier, vol. 149(C), pages 148-163.
    3. Bhattacharyya, S.K. & Cheliyan, A.S., 2019. "Optimization of a subsea production system for cost and reliability using its fault tree model," Reliability Engineering and System Safety, Elsevier, vol. 185(C), pages 213-219.
    4. Gascard, Eric & Simeu-Abazi, Zineb, 2018. "Quantitative Analysis of Dynamic Fault Trees by means of Monte Carlo Simulations: Event-Driven Simulation Approach," Reliability Engineering and System Safety, Elsevier, vol. 180(C), pages 487-504.
    5. Sinha, Purnendu, 2011. "Architectural design and reliability analysis of a fail-operational brake-by-wire system from ISO 26262 perspectives," Reliability Engineering and System Safety, Elsevier, vol. 96(10), pages 1349-1359.
    6. Volkanovski, Andrija & ÄŒepin, Marko & Mavko, Borut, 2009. "Application of the fault tree analysis for assessment of power system reliability," Reliability Engineering and System Safety, Elsevier, vol. 94(6), pages 1116-1127.
    7. Ghadhab, Majdi & Junges, Sebastian & Katoen, Joost-Pieter & Kuntz, Matthias & Volk, Matthias, 2019. "Safety analysis for vehicle guidance systems with dynamic fault trees," Reliability Engineering and System Safety, Elsevier, vol. 186(C), pages 37-50.
    8. Beckers, Kristian & Holling, Dominik & Côté, Isabelle & Hatebur, Denis, 2017. "A structured hazard analysis and risk assessment method for automotive systems—A descriptive study," Reliability Engineering and System Safety, Elsevier, vol. 158(C), pages 185-195.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Pauer, Gábor & Török, à rpád, 2022. "Introducing a novel safety assessment method through the example of a reduced complexity binary integer autonomous transport model," Reliability Engineering and System Safety, Elsevier, vol. 217(C).
    2. Schranner, Felix S. & Misheni, Alireza Abassi & Warnecke, Jork, 2021. "Deriving a representative variant for the functional safety development according to ISO 26262," Reliability Engineering and System Safety, Elsevier, vol. 209(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Pauer, Gábor & Török, à rpád, 2022. "Introducing a novel safety assessment method through the example of a reduced complexity binary integer autonomous transport model," Reliability Engineering and System Safety, Elsevier, vol. 217(C).
    2. Huang, Shuang & Zhou, Chunjie & Yang, Lili & Qin, Yuanqing & Huang, Xiongfeng & Hu, Bowen, 2016. "Transient fault tolerant control for vehicle brake-by-wire systems," Reliability Engineering and System Safety, Elsevier, vol. 149(C), pages 148-163.
    3. Kai Pan & Hui Liu & Xiaoqing Gou & Rui Huang & Dong Ye & Haining Wang & Adam Glowacz & Jie Kong, 2022. "Towards a Systematic Description of Fault Tree Analysis Studies Using Informetric Mapping," Sustainability, MDPI, vol. 14(18), pages 1-28, September.
    4. Zhou, Siwei & Ye, Luyao & Xiong, Shengwu & Xiang, Jianwen, 2022. "Reliability analysis of dynamic fault trees with Priority-AND gates based on irrelevance coverage model," Reliability Engineering and System Safety, Elsevier, vol. 224(C).
    5. Schranner, Felix S. & Misheni, Alireza Abassi & Warnecke, Jork, 2021. "Deriving a representative variant for the functional safety development according to ISO 26262," Reliability Engineering and System Safety, Elsevier, vol. 209(C).
    6. Han, Zhong & Tian, Liting & Cheng, Lin, 2021. "A deducing-based reliability optimization for electrical equipment with constant failure rate components duration their mission profile," Reliability Engineering and System Safety, Elsevier, vol. 212(C).
    7. Tang, Ming & Liao, Huchang, 2021. "Failure mode and effect analysis considering the fairness-oriented consensus of a large group with core-periphery structure," Reliability Engineering and System Safety, Elsevier, vol. 215(C).
    8. Vaurio, Jussi K., 2011. "Importance measures in risk-informed decision making: Ranking, optimisation and configuration control," Reliability Engineering and System Safety, Elsevier, vol. 96(11), pages 1426-1436.
    9. Leonardo Leoni & Farshad BahooToroody & Saeed Khalaj & Filippo De Carlo & Ahmad BahooToroody & Mohammad Mahdi Abaei, 2021. "Bayesian Estimation for Reliability Engineering: Addressing the Influence of Prior Choice," IJERPH, MDPI, vol. 18(7), pages 1-16, March.
    10. Tao, Haohan & Jia, Peng & Wang, Xiangyu & Wang, Liquan, 2024. "Reliability analysis of subsea control module based on dynamic Bayesian network and digital twin," Reliability Engineering and System Safety, Elsevier, vol. 248(C).
    11. Niu, Yi-Feng & Gao, Zi-You & Lam, William H.K., 2017. "A new efficient algorithm for finding all d-minimal cuts in multi-state networks," Reliability Engineering and System Safety, Elsevier, vol. 166(C), pages 151-163.
    12. Wu, Baichao & Tang, Aiping & Wu, Jie, 2016. "Modeling cascading failures in interdependent infrastructures under terrorist attacks," Reliability Engineering and System Safety, Elsevier, vol. 147(C), pages 1-8.
    13. Cheng, Shikun & Li, Zifu & Mang, Heinz-Peter & Neupane, Kalidas & Wauthelet, Marc & Huba, Elisabeth-Maria, 2014. "Application of fault tree approach for technical assessment of small-sized biogas systems in Nepal," Applied Energy, Elsevier, vol. 113(C), pages 1372-1381.
    14. Darwish, Molham & Almouahed, Shaban & de Lamotte, Florent, 2017. "The integration of expert-defined importance factors to enrich Bayesian Fault Tree Analysis," Reliability Engineering and System Safety, Elsevier, vol. 162(C), pages 81-90.
    15. Abdul Rahman, Fariz & Varuttamaseni, Athi & Kintner-Meyer, Michael & Lee, John C., 2013. "Application of fault tree analysis for customer reliability assessment of a distribution power system," Reliability Engineering and System Safety, Elsevier, vol. 111(C), pages 76-85.
    16. Zio, E. & Golea, L.R., 2012. "Analyzing the topological, electrical and reliability characteristics of a power transmission system for identifying its critical elements," Reliability Engineering and System Safety, Elsevier, vol. 101(C), pages 67-74.
    17. Henneaux, Pierre & Labeau, Pierre-Etienne & Maun, Jean-Claude, 2012. "A level-1 probabilistic risk assessment to blackout hazard in transmission power systems," Reliability Engineering and System Safety, Elsevier, vol. 102(C), pages 41-52.
    18. Zheng, Junjun & Okamura, Hiroyuki & Pang, Taoming & Dohi, Tadashi, 2021. "Availability importance measures of components in smart electric power grid systems," Reliability Engineering and System Safety, Elsevier, vol. 205(C).
    19. Shuai Lin & Limin Jia & Hengrun Zhang & Yanhui Wang, 2021. "A method for assessing resilience of high-speed EMUs considering a network-based system topology and performance data," Journal of Risk and Reliability, , vol. 235(5), pages 877-895, October.
    20. Hamzeh Soltanali & Mehdi Khojastehpour & José Torres Farinha & José Edmundo de Almeida e Pais, 2021. "An Integrated Fuzzy Fault Tree Model with Bayesian Network-Based Maintenance Optimization of Complex Equipment in Automotive Manufacturing," Energies, MDPI, vol. 14(22), pages 1-21, November.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:reensy:v:198:y:2020:i:c:s0951832019305034. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: https://www.journals.elsevier.com/reliability-engineering-and-system-safety .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.