IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v246y2022ics0925527322000111.html
   My bibliography  Save this article

To be more innovative and more competitive in dynamic environments: The role of additive manufacturing

Author

Listed:
  • Turkcan, Hulya
  • Imamoglu, Salih Zeki
  • Ince, Huseyin

Abstract

The emergence and rapid evolution of additive manufacturing have led to disruptive changes in the business landscape. However, empirical research on how additive manufacturing creates value for firms is still limited. This study, therefore, examines the relationships between additive manufacturing, new product development performance, and competitive advantage with moderating role of environmental dynamism. The sample consists of 226 manufacturing firms in Turkey. The results indicate that additive manufacturing is positively related to new product development performance and competitive advantage. For these relationships, a positive moderating effect of environmental dynamism is found. It is further demonstrated that new product development performance fully mediates the association between additive manufacturing and competitive advantage.

Suggested Citation

  • Turkcan, Hulya & Imamoglu, Salih Zeki & Ince, Huseyin, 2022. "To be more innovative and more competitive in dynamic environments: The role of additive manufacturing," International Journal of Production Economics, Elsevier, vol. 246(C).
    • Handle: RePEc:eee:proeco:v:246:y:2022:i:c:s0925527322000111
    DOI: 10.1016/j.ijpe.2022.108418
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925527322000111
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ijpe.2022.108418?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Zhao, Yushan & Cavusgil, Erin & Cavusgil, S. Tamer, 2014. "An investigation of the black-box supplier integration in new product development," Journal of Business Research, Elsevier, vol. 67(6), pages 1058-1064.
    2. Candi, Marina & Beltagui, Ahmad, 2019. "Effective use of 3D printing in the innovation process," Technovation, Elsevier, vol. 80, pages 63-73.
    3. Yu, Li & Hurley, Terrance M. & Kliebenstein, James B. & Orazem, Peter F., 2012. "Firm Size, Technical Change, and Wages in the Pork Sector, 1990-2005," Journal of Agricultural and Resource Economics, Western Agricultural Economics Association, vol. 37(2), pages 1-17, August.
    4. Schriber, Svante & Löwstedt, Jan, 2018. "Managing asset orchestration: A processual approach to adapting to dynamic environments," Journal of Business Research, Elsevier, vol. 90(C), pages 307-317.
    5. Iheanachor, Nkemdilim & Umukoro, Immanuel Ovemeso & David-West, Olayinka, 2021. "The role of product development practices on new product performance: Evidence from Nigeria's financial services providers," Technological Forecasting and Social Change, Elsevier, vol. 164(C).
    6. Schniederjans, Dara G., 2017. "Adoption of 3D-printing technologies in manufacturing: A survey analysis," International Journal of Production Economics, Elsevier, vol. 183(PA), pages 287-298.
    7. Afshari, Hamid & Searcy, Cory & Jaber, Mohamad Y., 2020. "The role of eco-innovation drivers in promoting additive manufacturing in supply chains," International Journal of Production Economics, Elsevier, vol. 223(C).
    8. Chikán, Attila & Czakó, Erzsébet & Kiss-Dobronyi, Bence & Losonci, Dávid, 2022. "Firm competitiveness: A general model and a manufacturing application," International Journal of Production Economics, Elsevier, vol. 243(C).
    9. Chin, Tachia & Wang, Wannan & Yang, Meng & Duan, Yunlong & Chen, Yantai, 2021. "The moderating effect of managerial discretion on blockchain technology and the firms’ innovation quality: Evidence from Chinese manufacturing firms," International Journal of Production Economics, Elsevier, vol. 240(C).
    10. Wamba, Samuel Fosso & Dubey, Rameshwar & Gunasekaran, Angappa & Akter, Shahriar, 2020. "The performance effects of big data analytics and supply chain ambidexterity: The moderating effect of environmental dynamism," International Journal of Production Economics, Elsevier, vol. 222(C).
    11. Nusair, Khaldoon & Hua, Nan, 2010. "Comparative assessment of structural equation modeling and multiple regression research methodologies: E-commerce context," Tourism Management, Elsevier, vol. 31(3), pages 314-324.
    12. Harshad Chandrakant Sonar & Vivek Khanzode & Milind Akarte, 2020. "A Conceptual Framework on Implementing Additive Manufacturing Technology Towards Firm Competitiveness," International Journal of Global Business and Competitiveness, Springer, vol. 15(2), pages 121-135, December.
    13. Dominik Eckstein & Matthias Goellner & Constantin Blome & Michael Henke, 2015. "The performance impact of supply chain agility and supply chain adaptability: the moderating effect of product complexity," International Journal of Production Research, Taylor & Francis Journals, vol. 53(10), pages 3028-3046, May.
    14. Romero-Silva, Rodrigo & Hernández-López, Gabriel, 2020. "Shop-floor scheduling as a competitive advantage: A study on the relevance of cyber-physical systems in different manufacturing contexts," International Journal of Production Economics, Elsevier, vol. 224(C).
    15. Armstrong, J. Scott & Overton, Terry S., 1977. "Estimating Nonresponse Bias in Mail Surveys," MPRA Paper 81694, University Library of Munich, Germany.
    16. Li, Da-yuan & Liu, Juan, 2014. "Dynamic capabilities, environmental dynamism, and competitive advantage: Evidence from China," Journal of Business Research, Elsevier, vol. 67(1), pages 2793-2799.
    17. Delic, Mia & Eyers, Daniel R., 2020. "The effect of additive manufacturing adoption on supply chain flexibility and performance: An empirical analysis from the automotive industry," International Journal of Production Economics, Elsevier, vol. 228(C).
    18. Mellor, Stephen & Hao, Liang & Zhang, David, 2014. "Additive manufacturing: A framework for implementation," International Journal of Production Economics, Elsevier, vol. 149(C), pages 194-201.
    19. Martin, Silvia L. & Javalgi, Rajshekhar (Raj) G. & Ciravegna, Luciano, 2020. "Marketing capabilities and international new venture performance: The mediation role of marketing communication and the moderation effect of technological turbulence," Journal of Business Research, Elsevier, vol. 107(C), pages 25-37.
    20. Dalenogare, Lucas Santos & Benitez, Guilherme Brittes & Ayala, Néstor Fabián & Frank, Alejandro Germán, 2018. "The expected contribution of Industry 4.0 technologies for industrial performance," International Journal of Production Economics, Elsevier, vol. 204(C), pages 383-394.
    21. Li, Ying & Dai, Jing & Cui, Li, 2020. "The impact of digital technologies on economic and environmental performance in the context of industry 4.0: A moderated mediation model," International Journal of Production Economics, Elsevier, vol. 229(C).
    22. Blichfeldt, Henrik & Faullant, Rita, 2021. "Performance effects of digital technology adoption and product & service innovation – A process-industry perspective," Technovation, Elsevier, vol. 105(C).
    23. Maresch, Daniela & Gartner, Johannes, 2020. "Make disruptive technological change happen - The case of additive manufacturing," Technological Forecasting and Social Change, Elsevier, vol. 155(C).
    24. Attaran, Mohsen, 2017. "The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing," Business Horizons, Elsevier, vol. 60(5), pages 677-688.
    25. Weller, Christian & Kleer, Robin & Piller, Frank T., 2015. "Economic implications of 3D printing: Market structure models in light of additive manufacturing revisited," International Journal of Production Economics, Elsevier, vol. 164(C), pages 43-56.
    26. Caviggioli, Federico & Ughetto, Elisa, 2019. "A bibliometric analysis of the research dealing with the impact of additive manufacturing on industry, business and society," International Journal of Production Economics, Elsevier, vol. 208(C), pages 254-268.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Marić, Josip & Opazo-Basáez, Marco & Vlačić, Božidar & Dabić, Marina, 2023. "Innovation management of three-dimensional printing (3DP) technology: Disclosing insights from existing literature and determining future research streams," Technological Forecasting and Social Change, Elsevier, vol. 193(C).
    2. Wong, David T.W. & Ngai, Eric W.T., 2023. "The impact of advanced manufacturing technology, sensing and analytics capabilities, and planning comprehensiveness on sustained competitive advantage: The moderating role of environmental uncertainty," International Journal of Production Economics, Elsevier, vol. 265(C).
    3. Jiawang Tang & Along Liu & Jibao Gu & Hefu Liu, 2024. "Can CEO environmental awareness promote new product development performance? Empirical research on Chinese manufacturing firms," Business Strategy and the Environment, Wiley Blackwell, vol. 33(2), pages 985-1003, February.
    4. Haug, Anders & Wickstrøm, Kent Adsbøll & Stentoft, Jan & Philipsen, Kristian, 2023. "Adoption of additive manufacturing: A survey of the role of knowledge networks and maturity in small and medium-sized Danish production firms," International Journal of Production Economics, Elsevier, vol. 255(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Marić, Josip & Opazo-Basáez, Marco & Vlačić, Božidar & Dabić, Marina, 2023. "Innovation management of three-dimensional printing (3DP) technology: Disclosing insights from existing literature and determining future research streams," Technological Forecasting and Social Change, Elsevier, vol. 193(C).
    2. Naghshineh, Bardia & Carvalho, Helena, 2022. "The implications of additive manufacturing technology adoption for supply chain resilience: A systematic search and review," International Journal of Production Economics, Elsevier, vol. 247(C).
    3. Wong, David T.W. & Ngai, Eric W.T., 2023. "The impact of advanced manufacturing technology, sensing and analytics capabilities, and planning comprehensiveness on sustained competitive advantage: The moderating role of environmental uncertainty," International Journal of Production Economics, Elsevier, vol. 265(C).
    4. Beltagui, Ahmad & Kunz, Nathan & Gold, Stefan, 2020. "The role of 3D printing and open design on adoption of socially sustainable supply chain innovation," International Journal of Production Economics, Elsevier, vol. 221(C).
    5. Harshad Sonar & Vivek Khanzode & Milind Akarte, 2022. "Additive Manufacturing Enabled Supply Chain Management: A Review and Research Directions," Vision, , vol. 26(2), pages 147-162, June.
    6. Shivam Gupta & Sachin Modgil & Piera Centobelli & Roberto Cerchione & Serena Strazzullo, 2022. "Additive Manufacturing and Green Information Systems as Technological Capabilities for Firm Performance," Global Journal of Flexible Systems Management, Springer;Global Institute of Flexible Systems Management, vol. 23(4), pages 515-534, December.
    7. Belhadi, Amine & Kamble, Sachin S. & Venkatesh, Mani & Chiappetta Jabbour, Charbel Jose & Benkhati, Imane, 2022. "Building supply chain resilience and efficiency through additive manufacturing: An ambidextrous perspective on the dynamic capability view," International Journal of Production Economics, Elsevier, vol. 249(C).
    8. Dhir, Amandeep & Talwar, Shalini & Islam, Nazrul & Alghafes, Rasha & Badghish, Saeed, 2023. "Different strokes for different folks: Comparative analysis of 3D printing in large, medium and small firms," Technovation, Elsevier, vol. 125(C).
    9. Culot, Giovanna & Orzes, Guido & Sartor, Marco & Nassimbeni, Guido, 2020. "The future of manufacturing: A Delphi-based scenario analysis on Industry 4.0," Technological Forecasting and Social Change, Elsevier, vol. 157(C).
    10. Hettiarachchi, Biman Darshana & Brandenburg, Marcus & Seuring, Stefan, 2022. "Connecting additive manufacturing to circular economy implementation strategies: Links, contingencies and causal loops," International Journal of Production Economics, Elsevier, vol. 246(C).
    11. Ukobitz, Desirée Valeria & Faullant, Rita, 2022. "The relative impact of isomorphic pressures on the adoption of radical technology: Evidence from 3D printing," Technovation, Elsevier, vol. 113(C).
    12. Beltagui, Ahmad & Gold, Stefan & Kunz, Nathan & Reiner, Gerald, 2023. "Special Issue: Rethinking operations and supply chain management in light of the 3D printing revolution," International Journal of Production Economics, Elsevier, vol. 255(C).
    13. Holzmann, Patrick & Breitenecker, Robert J. & Schwarz, Erich J. & Gregori, Patrick, 2020. "Business model design for novel technologies in nascent industries: An investigation of 3D printing service providers," Technological Forecasting and Social Change, Elsevier, vol. 159(C).
    14. Amine Belhadi & Sachin S. Kamble & Venkatesh Mani & Charbel Jose Chiappetta Jabbour & Imane Benkhati, 2022. "Building supply chain resilience and efficiency through additive manufacturing : An ambidextrous perspective on the dynamic capability view," Post-Print hal-04325568, HAL.
    15. Stornelli, Aldo & Ozcan, Sercan & Simms, Christopher, 2021. "Advanced manufacturing technology adoption and innovation: A systematic literature review on barriers, enablers, and innovation types," Research Policy, Elsevier, vol. 50(6).
    16. Foshammer, Jeppe & Søberg, Peder Veng & Helo, Petri & Ituarte, Iñigo Flores, 2022. "Identification of aftermarket and legacy parts suitable for additive manufacturing: A knowledge management-based approach," International Journal of Production Economics, Elsevier, vol. 253(C).
    17. Robert B. Handfield & James Aitken & Neil Turner & Tillmann Boehme & Cecil Bozarth, 2022. "Assessing Adoption Factors for Additive Manufacturing: Insights from Case Studies," Logistics, MDPI, vol. 6(2), pages 1-22, June.
    18. Delic, Mia & Eyers, Daniel R., 2020. "The effect of additive manufacturing adoption on supply chain flexibility and performance: An empirical analysis from the automotive industry," International Journal of Production Economics, Elsevier, vol. 228(C).
    19. Davide Castellani & Fabio Lamperti & Katiuscia Lavoratori, 2022. "Measuring adoption of industry 4.0 technologies via international trade data: insights from European countries," Economia e Politica Industriale: Journal of Industrial and Business Economics, Springer;Associazione Amici di Economia e Politica Industriale, vol. 49(1), pages 51-93, March.
    20. Li Cui & Hao Wu & Lin Wu & Ajay Kumar & Kim Hua Tan, 2023. "Investigating the relationship between digital technologies, supply chain integration and firm resilience in the context of COVID-19," Annals of Operations Research, Springer, vol. 327(2), pages 825-853, August.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:246:y:2022:i:c:s0925527322000111. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.