IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v255y2023ics0925527322002961.html
   My bibliography  Save this article

Adoption of additive manufacturing: A survey of the role of knowledge networks and maturity in small and medium-sized Danish production firms

Author

Listed:
  • Haug, Anders
  • Wickstrøm, Kent Adsbøll
  • Stentoft, Jan
  • Philipsen, Kristian

Abstract

Additive manufacturing (AM) has had a significant impact on manufacturing processes in many industries, which is expected to increase much further in the coming years. AM is, however, not easy to implement, as this involves several knowledge-related challenges, particularly for small and medium-sized enterprises (SMEs). To add to the understanding of this phenomenon, we develop a theoretical model that describes the use of external networks for overcoming such challenges in part by acquiring AM knowledge to increase internal AM maturity. We test our model of direct and mediated network effects on AM-related competitive advantages through a survey of Danish manufacturing SMEs. The results show that increased AM maturity explains around 40 percent of the relationship between knowledge acquisition from networks and AM-related competitive advantages. Results also show that building internal AM maturity was especially driven by networking with AM developers, AM suppliers, and AM organizations, while networking with AM consultants and other AM users promoted competitive advantages through other mechanisms. This suggests two overall strategies for achieving competitive advantages from AM: (1) using networks to build AM maturity, and (2) using external AM resources to compensate for low internal AM maturity.

Suggested Citation

  • Haug, Anders & Wickstrøm, Kent Adsbøll & Stentoft, Jan & Philipsen, Kristian, 2023. "Adoption of additive manufacturing: A survey of the role of knowledge networks and maturity in small and medium-sized Danish production firms," International Journal of Production Economics, Elsevier, vol. 255(C).
    • Handle: RePEc:eee:proeco:v:255:y:2023:i:c:s0925527322002961
    DOI: 10.1016/j.ijpe.2022.108714
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925527322002961
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ijpe.2022.108714?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Robert M. Grant, 1996. "Prospering in Dynamically-Competitive Environments: Organizational Capability as Knowledge Integration," Organization Science, INFORMS, vol. 7(4), pages 375-387, August.
    2. Kolade, Oluwaseun & Adegbile, Abiodun & Sarpong, David, 2022. "Can university-industry-government collaborations drive a 3D printing revolution in Africa? A triple helix model of technological leapfrogging in additive manufacturing," Technology in Society, Elsevier, vol. 69(C).
    3. Bruce Kogut & Udo Zander, 1992. "Knowledge of the Firm, Combinative Capabilities, and the Replication of Technology," Organization Science, INFORMS, vol. 3(3), pages 383-397, August.
    4. A.J. Thomas & R. Barton & E.G. John, 2008. "Advanced manufacturing technology implementation," International Journal of Productivity and Performance Management, Emerald Group Publishing Limited, vol. 57(2), pages 156-176, January.
    5. Berman, Barry, 2012. "3-D printing: The new industrial revolution," Business Horizons, Elsevier, vol. 55(2), pages 155-162.
    6. Delic, Mia & Eyers, Daniel R., 2020. "The effect of additive manufacturing adoption on supply chain flexibility and performance: An empirical analysis from the automotive industry," International Journal of Production Economics, Elsevier, vol. 228(C).
    7. Mellor, Stephen & Hao, Liang & Zhang, David, 2014. "Additive manufacturing: A framework for implementation," International Journal of Production Economics, Elsevier, vol. 149(C), pages 194-201.
    8. Katrin Oettmeier & Erik Hofmann, 2017. "Additive manufacturing technology adoption: an empirical analysis of general and supply chain-related determinants," Journal of Business Economics, Springer, vol. 87(1), pages 97-124, January.
    9. Gartner, Johannes & Fink, Matthias & Maresch, Daniela, 2022. "The Role of Fear of Missing Out and Experience in the Formation of SME Decision Makers’ Intentions to Adopt New Manufacturing Technologies," Technological Forecasting and Social Change, Elsevier, vol. 180(C).
    10. Baldwin, John & Lin, Zhengxi, 2002. "Impediments to advanced technology adoption for Canadian manufacturers," Research Policy, Elsevier, vol. 31(1), pages 1-18, January.
    11. BarNir, Anat & Gallaugher, John M. & Auger, Pat, 2003. "Business process digitization, strategy, and the impact of firm age and size: the case of the magazine publishing industry," Journal of Business Venturing, Elsevier, vol. 18(6), pages 789-814, November.
    12. Birger Wernerfelt, 1984. "A resource‐based view of the firm," Strategic Management Journal, Wiley Blackwell, vol. 5(2), pages 171-180, April.
    13. Tether, Bruce S., 2002. "Who co-operates for innovation, and why: An empirical analysis," Research Policy, Elsevier, vol. 31(6), pages 947-967, August.
    14. Turkcan, Hulya & Imamoglu, Salih Zeki & Ince, Huseyin, 2022. "To be more innovative and more competitive in dynamic environments: The role of additive manufacturing," International Journal of Production Economics, Elsevier, vol. 246(C).
    15. Baumers, Martin & Dickens, Phill & Tuck, Chris & Hague, Richard, 2016. "The cost of additive manufacturing: machine productivity, economies of scale and technology-push," Technological Forecasting and Social Change, Elsevier, vol. 102(C), pages 193-201.
    16. Matthew Fulton & Bernard Hon, 2010. "Managing advanced manufacturing technology (AMT) implementation in manufacturing SMEs," International Journal of Productivity and Performance Management, Emerald Group Publishing Limited, vol. 59(4), pages 351-371, April.
    17. Lui, Steven S. & Wong, Yin-yee & Liu, Weiping, 2009. "Asset specificity roles in interfirm cooperation: Reducing opportunistic behavior or increasing cooperative behavior?," Journal of Business Research, Elsevier, vol. 62(11), pages 1214-1219, November.
    18. José M. González-Varona & David Poza & Fernando Acebes & Félix Villafáñez & Javier Pajares & Adolfo López-Paredes, 2020. "New Business Models for Sustainable Spare Parts Logistics: A Case Study," Sustainability, MDPI, vol. 12(8), pages 1-16, April.
    19. Ding, Jin & Baumers, Martin & Clark, Elizabeth A. & Wildman, Ricky D., 2021. "The economics of additive manufacturing: Towards a general cost model including process failure," International Journal of Production Economics, Elsevier, vol. 237(C).
    20. Fernando Galindo-Rueda & Fabien Verger, 2016. "OECD Taxonomy of Economic Activities Based on R&D Intensity," OECD Science, Technology and Industry Working Papers 2016/4, OECD Publishing.
    21. Ghobadian, Abby & Talavera, Irene & Bhattacharya, Arijit & Kumar, Vikas & Garza-Reyes, Jose Arturo & O'Regan, Nicholas, 2020. "Examining legitimatisation of additive manufacturing in the interplay between innovation, lean manufacturing and sustainability," International Journal of Production Economics, Elsevier, vol. 219(C), pages 457-468.
    22. Weller, Christian & Kleer, Robin & Piller, Frank T., 2015. "Economic implications of 3D printing: Market structure models in light of additive manufacturing revisited," International Journal of Production Economics, Elsevier, vol. 164(C), pages 43-56.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Naghshineh, Bardia & Carvalho, Helena, 2022. "The implications of additive manufacturing technology adoption for supply chain resilience: A systematic search and review," International Journal of Production Economics, Elsevier, vol. 247(C).
    2. Beltagui, Ahmad & Gold, Stefan & Kunz, Nathan & Reiner, Gerald, 2023. "Special Issue: Rethinking operations and supply chain management in light of the 3D printing revolution," International Journal of Production Economics, Elsevier, vol. 255(C).
    3. Harshad Sonar & Vivek Khanzode & Milind Akarte, 2022. "Additive Manufacturing Enabled Supply Chain Management: A Review and Research Directions," Vision, , vol. 26(2), pages 147-162, June.
    4. Culot, Giovanna & Orzes, Guido & Sartor, Marco & Nassimbeni, Guido, 2020. "The future of manufacturing: A Delphi-based scenario analysis on Industry 4.0," Technological Forecasting and Social Change, Elsevier, vol. 157(C).
    5. Martin Baumers & Luca Beltrametti & Angelo Gasparre & Richard Hague, 2017. "Informing additive manufacturing technology adoption: total cost and the impact of capacity utilisation," International Journal of Production Research, Taylor & Francis Journals, vol. 55(23), pages 6957-6970, December.
    6. Marić, Josip & Opazo-Basáez, Marco & Vlačić, Božidar & Dabić, Marina, 2023. "Innovation management of three-dimensional printing (3DP) technology: Disclosing insights from existing literature and determining future research streams," Technological Forecasting and Social Change, Elsevier, vol. 193(C).
    7. Nazanin Hosseini Arian & Alireza Pooya & Fariborz Rahimnia & Ali Sibevei, 2021. "Assessment the effect of rapid prototyping implementation on supply chain sustainability: a system dynamics approach," Operations Management Research, Springer, vol. 14(3), pages 467-493, December.
    8. Caviggioli, Federico & Ughetto, Elisa, 2019. "A bibliometric analysis of the research dealing with the impact of additive manufacturing on industry, business and society," International Journal of Production Economics, Elsevier, vol. 208(C), pages 254-268.
    9. Holzmann, Patrick & Breitenecker, Robert J. & Schwarz, Erich J. & Gregori, Patrick, 2020. "Business model design for novel technologies in nascent industries: An investigation of 3D printing service providers," Technological Forecasting and Social Change, Elsevier, vol. 159(C).
    10. Jiang, Ruth & Kleer, Robin & Piller, Frank T., 2017. "Predicting the future of additive manufacturing: A Delphi study on economic and societal implications of 3D printing for 2030," Technological Forecasting and Social Change, Elsevier, vol. 117(C), pages 84-97.
    11. Radu Godina & Inês Ribeiro & Florinda Matos & Bruna T. Ferreira & Helena Carvalho & Paulo Peças, 2020. "Impact Assessment of Additive Manufacturing on Sustainable Business Models in Industry 4.0 Context," Sustainability, MDPI, vol. 12(17), pages 1-21, August.
    12. Foshammer, Jeppe & Søberg, Peder Veng & Helo, Petri & Ituarte, Iñigo Flores, 2022. "Identification of aftermarket and legacy parts suitable for additive manufacturing: A knowledge management-based approach," International Journal of Production Economics, Elsevier, vol. 253(C).
    13. Yeh, Ching-Chiang & Chen, Yi-Fan, 2018. "Critical success factors for adoption of 3D printing," Technological Forecasting and Social Change, Elsevier, vol. 132(C), pages 209-216.
    14. Kleer, Robin & Piller, Frank T., 2019. "Local manufacturing and structural shifts in competition: Market dynamics of additive manufacturing," International Journal of Production Economics, Elsevier, vol. 216(C), pages 23-34.
    15. Dhir, Amandeep & Talwar, Shalini & Islam, Nazrul & Alghafes, Rasha & Badghish, Saeed, 2023. "Different strokes for different folks: Comparative analysis of 3D printing in large, medium and small firms," Technovation, Elsevier, vol. 125(C).
    16. Marco Savastano & Carlo Amendola & Francesco Bellini & Fabrizio D’Ascenzo, 2019. "Contextual Impacts on Industrial Processes Brought by the Digital Transformation of Manufacturing: A Systematic Review," Sustainability, MDPI, vol. 11(3), pages 1-38, February.
    17. Hettiarachchi, Biman Darshana & Brandenburg, Marcus & Seuring, Stefan, 2022. "Connecting additive manufacturing to circular economy implementation strategies: Links, contingencies and causal loops," International Journal of Production Economics, Elsevier, vol. 246(C).
    18. Victor Verboeket & Harold Krikke, 2019. "Additive Manufacturing: A Game Changer in Supply Chain Design," Logistics, MDPI, vol. 3(2), pages 1-27, April.
    19. Turkcan, Hulya & Imamoglu, Salih Zeki & Ince, Huseyin, 2022. "To be more innovative and more competitive in dynamic environments: The role of additive manufacturing," International Journal of Production Economics, Elsevier, vol. 246(C).
    20. Venugopal Ramachandran, 2011. "Strategic corporate social responsibility: a ‘dynamic capabilities’ perspective," Corporate Social Responsibility and Environmental Management, John Wiley & Sons, vol. 18(5), pages 285-293, September.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:255:y:2023:i:c:s0925527322002961. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.