IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v245y2022ics0925527321003753.html
   My bibliography  Save this article

Value, product delivery strategies and operational performance in the medical technology industry

Author

Listed:
  • Bhamra, Ran
  • Hicks, Christian
  • Small, Adrian
  • García-Villarreal, Enrique

Abstract

Healthcare systems face increasing demand and expectations due to globally aging populations and new technologies which will increase the demand for medical technology products. The ‘value’ of health technologies is based upon health technology assessment rather than customer perceptions. This research contributes to product delivery strategy and mass customization theory and contributes to practice by explaining how the proposed conceptual framework could enhance the value proposition of medical technology products, improving company performance and competitiveness. This paper used a 13-month, longitudinal, participative Action Research strategy to understand and improve the performance of a German medical technology company that manufactures prostheses with varying levels of customization. The conceptual framework was successfully applied in the case organization. It provided a structure for product segmentation which grouped products according to their value propositions which reflected different trade-offs in terms of health technology assessment (HTA). Appropriate delivery strategies were then determined for each group. This research demonstrated that product delivery strategies based upon postponement improved productivity and delivery performance, whilst reducing inventory and enhancing value.

Suggested Citation

  • Bhamra, Ran & Hicks, Christian & Small, Adrian & García-Villarreal, Enrique, 2022. "Value, product delivery strategies and operational performance in the medical technology industry," International Journal of Production Economics, Elsevier, vol. 245(C).
    • Handle: RePEc:eee:proeco:v:245:y:2022:i:c:s0925527321003753
    DOI: 10.1016/j.ijpe.2021.108399
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925527321003753
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ijpe.2021.108399?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. de Blok, Carolien & Meijboom, Bert & Luijkx, Katrien & Schols, Jos, 2013. "The human dimension of modular care provision: Opportunities for personalization and customization," International Journal of Production Economics, Elsevier, vol. 142(1), pages 16-26.
    2. Zhang, Min & Zhao, Xiande & Qi, Yinan, 2014. "The effects of organizational flatness, coordination, and product modularity on mass customization capability," International Journal of Production Economics, Elsevier, vol. 158(C), pages 145-155.
    3. Gunasekaran, Angappa & Ngai, Eric W.T., 2009. "Modeling and analysis of build-to-order supply chains," European Journal of Operational Research, Elsevier, vol. 195(2), pages 319-334, June.
    4. Clegg, Ben & Little, Paul & Govette, Steve & Logue, Joel, 2017. "Transformation of a small-to-medium-sized enterprise to a multi-organisation product-service solution provider," International Journal of Production Economics, Elsevier, vol. 192(C), pages 81-91.
    5. Schmidberger, Stephan & Bals, Lydia & Hartmann, Evi & Jahns, Christopher, 2009. "Ground handling services at European hub airports: Development of a performance measurement system for benchmarking," International Journal of Production Economics, Elsevier, vol. 117(1), pages 104-116, January.
    6. Gylling, Michael & Heikkilä, Jussi & Jussila, Kari & Saarinen, Markku, 2015. "Making decisions on offshore outsourcing and backshoring: A case study in the bicycle industry," International Journal of Production Economics, Elsevier, vol. 162(C), pages 92-100.
    7. Fogliatto, Flavio S. & da Silveira, Giovani J.C. & Borenstein, Denis, 2012. "The mass customization decade: An updated review of the literature," International Journal of Production Economics, Elsevier, vol. 138(1), pages 14-25.
    8. Formentini, Marco & Romano, Pietro, 2011. "Using value analysis to support knowledge transfer in the multi-project setting," International Journal of Production Economics, Elsevier, vol. 131(2), pages 545-560, June.
    9. Dimitris Kyriazis & Christos Anastassis, 2007. "The Validity of the Economic Value Added Approach: an Empirical Application," European Financial Management, European Financial Management Association, vol. 13(1), pages 71-100, January.
    10. McGovern, Tom & Hicks, Christian, 2006. "Specifications and supplier development in the UK electrical transmission and distribution equipment industry," International Journal of Production Economics, Elsevier, vol. 104(1), pages 164-178, November.
    11. Min Zhang & Fiona Lettice & Xiande Zhao, 2015. "The impact of social capital on mass customisation and product innovation capabilities," International Journal of Production Research, Taylor & Francis Journals, vol. 53(17), pages 5251-5264, September.
    12. Hicks, C. & McGovern, T. & Earl, C. F., 2000. "Supply chain management: A strategic issue in engineer to order manufacturing," International Journal of Production Economics, Elsevier, vol. 65(2), pages 179-190, April.
    13. Dey, Prasanta Kumar & Bhattacharya, Arijit & Ho, William, 2015. "Strategic supplier performance evaluation: A case-based action research of a UK manufacturing organisation," International Journal of Production Economics, Elsevier, vol. 166(C), pages 192-214.
    14. Turner, Frances & Merle, Aurélie & Gotteland, David, 2020. "Enhancing consumer value of the co-design experience in mass customization," Journal of Business Research, Elsevier, vol. 117(C), pages 473-483.
    15. Wolfgang Ulaga & Andreas Eggert, 2006. "Value-Based Differentiation in Business Relationships: Gaining and Sustaining Key Supplier Status," Post-Print hal-00482456, HAL.
    16. Tavares Thomé, Antônio Márcio & Scavarda, Luiz Felipe & Fernandez, Nicole Suclla & Scavarda, Annibal José, 2012. "Sales and operations planning: A research synthesis," International Journal of Production Economics, Elsevier, vol. 138(1), pages 1-13.
    17. Qi, Yinan & Mao, Zhigang & Zhang, Min & Guo, Hangfei, 2020. "Manufacturing practices and servitization: The role of mass customization and product innovation capabilities," International Journal of Production Economics, Elsevier, vol. 228(C).
    18. Hales, Douglas N. & Chakravorty, Satya S., 2006. "Implementation of Deming's style of quality management: An action research study in a plastics company," International Journal of Production Economics, Elsevier, vol. 103(1), pages 131-148, September.
    19. Soman, Chetan Anil & van Donk, Dirk Pieter & Gaalman, Gerard, 2004. "Combined make-to-order and make-to-stock in a food production system," International Journal of Production Economics, Elsevier, vol. 90(2), pages 223-235, July.
    20. Bernd Scholz‐Reiter & Jens Heger & Christian Meinecke & Johann Bergmann, 2012. "Integration of demand forecasts in ABC‐XYZ analysis: practical investigation at an industrial company," International Journal of Productivity and Performance Management, Emerald Group Publishing Limited, vol. 61(4), pages 445-451, April.
    21. Benn Lawson & Frits K. Pil & Matthias Holweg, 2018. "Multi†Modal Order Fulfillment: Concept and Application," Production and Operations Management, Production and Operations Management Society, vol. 27(2), pages 269-284, February.
    22. Tyson R. Browning, 2003. "On customer value and improvement in product development processes," Systems Engineering, John Wiley & Sons, vol. 6(1), pages 49-61.
    23. Salerno, Mario Sergio, 2009. "Reconfigurable organisation to cope with unpredictable goals," International Journal of Production Economics, Elsevier, vol. 122(1), pages 419-428, November.
    24. Nikolaus Franke & Martin Schreier & Ulrike Kaiser, 2010. "The "I Designed It Myself" Effect in Mass Customization," Management Science, INFORMS, vol. 56(1), pages 125-140, January.
    25. Olhager, Jan, 2003. "Strategic positioning of the order penetration point," International Journal of Production Economics, Elsevier, vol. 85(3), pages 319-329, September.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ghafoori, Arman & Gupta, Manjul & Merhi, Mohammad I. & Gupta, Samrat & Shore, Adam P., 2024. "Toward the role of organizational culture in data-driven digital transformation," International Journal of Production Economics, Elsevier, vol. 271(C).
    2. Olivia McDermott & Ida Foley & Jiju Antony & Michael Sony & Mary Butler, 2022. "The Impact of Industry 4.0 on the Medical Device Regulatory Product Life Cycle Compliance," Sustainability, MDPI, vol. 14(21), pages 1-22, November.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Pereira, Daniel Filipe & Oliveira, José Fernando & Carravilla, Maria Antónia, 2022. "Merging make-to-stock/make-to-order decisions into sales and operations planning: A multi-objective approach," Omega, Elsevier, vol. 107(C).
    2. Unai Apaolaza & Aitor Orue & Aitor Lizarralde & Aitor Oyarbide-Zubillaga, 2022. "Competitive Improvement through Integrated Management of Sales and Operations," Sustainability, MDPI, vol. 14(5), pages 1-18, February.
    3. Natalia Szozda & Artur Świerczek, 2022. "Upstream and downstream dyad governance within the network structures: Creating supply chain governance for the customized products," Electronic Markets, Springer;IIM University of St. Gallen, vol. 32(2), pages 873-898, June.
    4. Na Liu & Pui-Sze Chow & Hongshan Zhao, 2020. "Challenges and critical successful factors for apparel mass customization operations: recent development and case study," Annals of Operations Research, Springer, vol. 291(1), pages 531-563, August.
    5. Linda Zhang & Sara Shafiee, 2022. "Developing separate or integrated configurators? A longitudinal case study," Post-Print hal-03707380, HAL.
    6. Sandrin, Enrico & Trentin, Alessio & Forza, Cipriano, 2018. "Leveraging high-involvement practices to develop mass customization capability: A contingent configurational perspective," International Journal of Production Economics, Elsevier, vol. 196(C), pages 335-345.
    7. Guo, Chiquan & Wang, Yong J. & Metcalf, Ashley, 2014. "How to calibrate conventional market-oriented organizational culture in 21st century production-centered firms? A customer relationship perspective," International Journal of Production Economics, Elsevier, vol. 156(C), pages 235-245.
    8. Liu, Weihua & Wang, Qian & Mao, Qiaomei & Wang, Shuqing & Zhu, Donglei, 2015. "A scheduling model of logistics service supply chain based on the mass customization service and uncertainty of FLSP’s operation time," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 83(C), pages 189-215.
    9. Frank Wiengarten & Prakash J. Singh & Brian Fynes & Ali Nazarpour, 2017. "Impact of mass customization on cost and flexiblity performances: the role of social capital," Operations Management Research, Springer, vol. 10(3), pages 137-147, December.
    10. Kerkkanen, Annastiina, 2007. "Determining semi-finished products to be stocked when changing the MTS-MTO policy: Case of a steel mill," International Journal of Production Economics, Elsevier, vol. 108(1-2), pages 111-118, July.
    11. Mihiotis A., 2014. "Management of Supply Chain: X-to-order Concepts vs Make-to-stock Model," International Journal of Business Administration, International Journal of Business Administration, Sciedu Press, vol. 5(3), pages 30-33, May.
    12. Cannas, Violetta G. & Gosling, Jonathan & Pero, Margherita & Rossi, Tommaso, 2020. "Determinants for order-fulfilment strategies in engineer-to-order companies: Insights from the machinery industry," International Journal of Production Economics, Elsevier, vol. 228(C).
    13. Helia Yousefnejad & Maryam Esmaeili, 2020. "Tactical production planning in a hybrid MTS/MTO system using Stackelberg game," Operational Research, Springer, vol. 20(3), pages 1791-1809, September.
    14. Lin, Shunzhi & Lin, Jiabao, 2023. "How organizations leverage digital technology to develop customization and enhance customer relationship performance: An empirical investigation," Technological Forecasting and Social Change, Elsevier, vol. 188(C).
    15. Romano, Pietro & Formentini, Marco, 2012. "Designing and implementing open book accounting in buyer–supplier dyads: A framework for supplier selection and motivation," International Journal of Production Economics, Elsevier, vol. 137(1), pages 68-83.
    16. Gosling, Jonathan & Naim, Mohamed M., 2009. "Engineer-to-order supply chain management: A literature review and research agenda," International Journal of Production Economics, Elsevier, vol. 122(2), pages 741-754, December.
    17. Bersch, Christopher V. & Akkerman, Renzo & Kolisch, Rainer, 2021. "Strategic planning of new product introductions: Integrated planning of products and modules in the automotive industry," Omega, Elsevier, vol. 105(C).
    18. Hu, Xiaojian & Wang, Guanxiong & Li, Xiaozheng & Zhang, Yue & Feng, Shuai & Yang, Aifeng, 2018. "Joint decision model of supplier selection and order allocation for the mass customization of logistics services," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 120(C), pages 76-95.
    19. Noroozi, Sayeh & Wikner, Joakim, 2017. "Sales and operations planning in the process industry: A literature review," International Journal of Production Economics, Elsevier, vol. 188(C), pages 139-155.
    20. Brun, Alessandro & Zorzini, Marta, 2009. "Evaluation of product customization strategies through modularization and postponement," International Journal of Production Economics, Elsevier, vol. 120(1), pages 205-220, July.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:245:y:2022:i:c:s0925527321003753. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.