IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v162y2020icp30-42.html
   My bibliography  Save this article

Sediment-laden flow and erosion modeling in a Pelton turbine injector

Author

Listed:
  • Guo, Bao
  • Xiao, Yexiang
  • Rai, Anant Kumar
  • Zhang, Jin
  • Liang, Quanwei

Abstract

A major challenge in the operation and development of the high-head water resources, especially in the mountains with high sediment yield, is the erosion of Pelton turbine components. In this work, a numerical study was carried out based on sediment properties measured in field conditions, such as particle distributions and concentrations, to analyze the erosion mechanism of a prototype Pelton turbine injector. The Volume of Fluid (VOF) method was combined with a Lagrangian particle tracking approach to simulate the air-water-sediment flow, followed by the application of Mansouri’s model to estimate the erosion. The predicted erosion patterns were in good agreement with field observations, especially in physically reproducing the asymmetrical erosion distribution on the needle surface. To elucidate this asymmetry, fundamental analysis of the flow patterns including the vortex structures and the secondary flow on the particle behaviors was carried out. Interestingly results were found about the secondary flow induced by the von Kármán vortex shedding, which increased the particle separations, and consequently, enhanced the erosion in shedding areas. The current work may provide important engineering insights to reduce erosion of components with inner obstructions.

Suggested Citation

  • Guo, Bao & Xiao, Yexiang & Rai, Anant Kumar & Zhang, Jin & Liang, Quanwei, 2020. "Sediment-laden flow and erosion modeling in a Pelton turbine injector," Renewable Energy, Elsevier, vol. 162(C), pages 30-42.
    • Handle: RePEc:eee:renene:v:162:y:2020:i:c:p:30-42
    DOI: 10.1016/j.renene.2020.08.032
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148120312696
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2020.08.032?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Messa, Gianandrea Vittorio & Mandelli, Simone & Malavasi, Stefano, 2019. "Hydro-abrasive erosion in Pelton turbine injectors: A numerical study," Renewable Energy, Elsevier, vol. 130(C), pages 474-488.
    2. Han, L. & Duan, X.L. & Gong, R.Z. & Zhang, G.F. & Wang, H.J. & Wei, X.Z., 2019. "Physic of secondary flow phenomenon in distributor and bifurcation pipe of Pelton turbine," Renewable Energy, Elsevier, vol. 131(C), pages 159-167.
    3. Mulu, B.G. & Jonsson, P.P. & Cervantes, M.J., 2012. "Experimental investigation of a Kaplan draft tube – Part I: Best efficiency point," Applied Energy, Elsevier, vol. 93(C), pages 695-706.
    4. Leguizamón, Sebastián & Alimirzazadeh, Siamak & Jahanbakhsh, Ebrahim & Avellan, François, 2020. "Multiscale simulation of erosive wear in a prototype-scale Pelton runner," Renewable Energy, Elsevier, vol. 151(C), pages 204-215.
    5. Yexiang Xiao & Bao Guo & Soo-Hwang Ahn & Yongyao Luo & Zhengwei Wang & Guangtai Shi & Yanhao Li, 2019. "Slurry Flow and Erosion Prediction in a Centrifugal Pump after Long-Term Operation," Energies, MDPI, vol. 12(8), pages 1-17, April.
    6. Aponte, R.D. & Teran, L.A. & Grande, J.F. & Coronado, J.J. & Ladino, J.A. & Larrahondo, F.J. & Rodríguez, S.A., 2020. "Minimizing erosive wear through a CFD multi-objective optimization methodology for different operating points of a Francis turbine," Renewable Energy, Elsevier, vol. 145(C), pages 2217-2232.
    7. Jung, In Hyuk & Kim, Young Soo & Shin, Dong Ho & Chung, Jin Taek & Shin, Youhwan, 2019. "Influence of spear needle eccentricity on jet quality in micro Pelton turbine for power generation," Energy, Elsevier, vol. 175(C), pages 58-65.
    8. Jonsson, P.P. & Mulu, B.G. & Cervantes, M.J., 2012. "Experimental investigation of a Kaplan draft tube – Part II: Off-design conditions," Applied Energy, Elsevier, vol. 94(C), pages 71-83.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ge, Xinfeng & Sun, Jie & Zhou, Ye & Cai, Jianguo & Zhang, Hui & Zhang, Lei & Ding, Mingquan & Deng, Chaozhong & Binama, Maxime & Zheng, Yuan, 2021. "Experimental and Numerical studies on Opening and Velocity Influence on Sediment Erosion of Pelton Turbine Buckets," Renewable Energy, Elsevier, vol. 173(C), pages 1040-1056.
    2. Xiao, Yexiang & Guo, Bao & Rai, Anant Kumar & Liu, Jie & Liang, Quanwei & Zhang, Jin, 2022. "Analysis of hydro-abrasive erosion in Pelton buckets using a Eulerian-Lagrangian approach," Renewable Energy, Elsevier, vol. 197(C), pages 472-485.
    3. Khan, Rehan & Ullah, Sati & Qahtani, Faez & Pao, William & Talha, Tariq, 2024. "Experimental and numerical investigation of hydro-abrasive erosion in the Pelton turbine buckets for multiphase flow," Renewable Energy, Elsevier, vol. 222(C).
    4. Li, Lihao & Lu, Jiaxing & Gong, Yong & Zhao, Haoyu & Liu, Xiaobing & Zhu, Baoshan, 2024. "Sediment erosion characteristics of Pelton turbine runner: Effects of sediment concentration and diameter," Renewable Energy, Elsevier, vol. 220(C).
    5. Guo, Bao & Xiao, Yexiang & Rai, Anant Kumar & Liang, Quanwei & Liu, Jie, 2021. "Analysis of the air-water-sediment flow behavior in Pelton buckets using a Eulerian-Lagrangian approach," Energy, Elsevier, vol. 218(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Xiao, Yexiang & Guo, Bao & Rai, Anant Kumar & Liu, Jie & Liang, Quanwei & Zhang, Jin, 2022. "Analysis of hydro-abrasive erosion in Pelton buckets using a Eulerian-Lagrangian approach," Renewable Energy, Elsevier, vol. 197(C), pages 472-485.
    2. Guo, Bao & Xiao, Yexiang & Rai, Anant Kumar & Liang, Quanwei & Liu, Jie, 2021. "Analysis of the air-water-sediment flow behavior in Pelton buckets using a Eulerian-Lagrangian approach," Energy, Elsevier, vol. 218(C).
    3. Lai, Xi-De & Liang, Quan-Wei & Ye, Dao-Xing & Chen, Xiao-Ming & Xia, Mi-Mi, 2019. "Experimental investigation of flows inside draft tube of a high-head pump-turbine," Renewable Energy, Elsevier, vol. 133(C), pages 731-742.
    4. Martinez, J.J. & Deng, Z.D. & Titzler, P.S. & Duncan, J.P. & Lu, J. & Mueller, R.P. & Tian, C. & Trumbo, B.A. & Ahmann, M.L. & Renholds, J.F., 2019. "Hydraulic and biological characterization of a large Kaplan turbine," Renewable Energy, Elsevier, vol. 131(C), pages 240-249.
    5. Li, Lihao & Lu, Jiaxing & Gong, Yong & Zhao, Haoyu & Liu, Xiaobing & Zhu, Baoshan, 2024. "Sediment erosion characteristics of Pelton turbine runner: Effects of sediment concentration and diameter," Renewable Energy, Elsevier, vol. 220(C).
    6. Li, Deyou & Wang, Hongjie & Qin, Yonglin & Li, Zhenggui & Wei, Xianzhu & Qin, Daqing, 2018. "Mechanism of high amplitude low frequency fluctuations in a pump-turbine in pump mode," Renewable Energy, Elsevier, vol. 126(C), pages 668-680.
    7. Gabl, Roman & Innerhofer, Daniel & Achleitner, Stefan & Righetti, Maurizio & Aufleger, Markus, 2018. "Evaluation criteria for velocity distributions in front of bulb hydro turbines," Renewable Energy, Elsevier, vol. 121(C), pages 745-756.
    8. Daniels, S.J. & Rahat, A.A.M. & Tabor, G.R. & Fieldsend, J.E. & Everson, R.M., 2020. "Shape optimisation of the sharp-heeled Kaplan draft tube: Performance evaluation using Computational Fluid Dynamics," Renewable Energy, Elsevier, vol. 160(C), pages 112-126.
    9. Hong, Sheng & Wu, Yuping & Wu, Jianhua & Zhang, Yuquan & Zheng, Yuan & Li, Jiahui & Lin, Jinran, 2021. "Microstructure and cavitation erosion behavior of HVOF sprayed ceramic-metal composite coatings for application in hydro-turbines," Renewable Energy, Elsevier, vol. 164(C), pages 1089-1099.
    10. Ni, Dan & Zhang, Ning & Gao, Bo & Li, Zhong & Yang, Minguan, 2020. "Dynamic measurements on unsteady pressure pulsations and flow distributions in a nuclear reactor coolant pump," Energy, Elsevier, vol. 198(C).
    11. Chitrakar, Sailesh & Solemslie, Bjørn Winther & Neopane, Hari Prasad & Dahlhaug, Ole Gunnar, 2020. "Review on numerical techniques applied in impulse hydro turbines," Renewable Energy, Elsevier, vol. 159(C), pages 843-859.
    12. Raluca G. Iovănel & Georgiana Dunca & Diana M. Bucur & Michel J. Cervantes, 2020. "Numerical Simulation of the Flow in a Kaplan Turbine Model during Transient Operation from the Best Efficiency Point to Part Load," Energies, MDPI, vol. 13(12), pages 1-21, June.
    13. Bosioc, Alin Ilie & Tănasă, Constantin, 2020. "Experimental study of swirling flow from conical diffusers using the water jet control method," Renewable Energy, Elsevier, vol. 152(C), pages 385-398.
    14. Xiaobo Zheng & Yaping Zhao & Huan Zhang & Yongjian Pu & Zhihua Li & Pengcheng Guo, 2022. "Optimization and Performance Analysis of Francis Turbine Runner Based on Super-Transfer Approximate Method under Multi-Energy Complementary Conditions," Sustainability, MDPI, vol. 14(16), pages 1-16, August.
    15. Ge, Xinfeng & Sun, Jie & Zhou, Ye & Cai, Jianguo & Zhang, Hui & Zhang, Lei & Ding, Mingquan & Deng, Chaozhong & Binama, Maxime & Zheng, Yuan, 2021. "Experimental and Numerical studies on Opening and Velocity Influence on Sediment Erosion of Pelton Turbine Buckets," Renewable Energy, Elsevier, vol. 173(C), pages 1040-1056.
    16. Franz Josef Johann Hahn & Anton Maly & Bernhard Semlitsch & Christian Bauer, 2023. "Numerical Investigation of Pelton Turbine Distributor Systems with Axial Inflow," Energies, MDPI, vol. 16(6), pages 1-20, March.
    17. Kumar, Prashant & Singal, S.K. & Gohil, Pankaj P., 2024. "A technical review on combined effect of cavitation and silt erosion on Francis turbine," Renewable and Sustainable Energy Reviews, Elsevier, vol. 190(PB).
    18. Ivan Litvinov & Daniil Suslov & Evgeny Gorelikov & Sergey Shtork, 2021. "Experimental Study of Transient Flow Regimes in a Model Hydroturbine Draft Tube," Energies, MDPI, vol. 14(5), pages 1-13, February.
    19. Leguizamón, Sebastián & Alimirzazadeh, Siamak & Jahanbakhsh, Ebrahim & Avellan, François, 2020. "Multiscale simulation of erosive wear in a prototype-scale Pelton runner," Renewable Energy, Elsevier, vol. 151(C), pages 204-215.
    20. Li, Deyou & Wang, Hongjie & Qin, Yonglin & Wei, Xianzhu & Qin, Daqing, 2018. "Numerical simulation of hysteresis characteristic in the hump region of a pump-turbine model," Renewable Energy, Elsevier, vol. 115(C), pages 433-447.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:162:y:2020:i:c:p:30-42. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.