IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v284y2023ics0360544223026257.html
   My bibliography  Save this article

Parametric analysis and multi-objective optimization of a heat pump dryer based on working conditions and using different refrigerants

Author

Listed:
  • Deymi-Dashtebayaz, Mahdi
  • Davoodi, Vajihe
  • Khutornaya, Julia
  • Sergienko, Olga

Abstract

Considering Heat pump dryers are extensively used in the food industry, evaluating and optimizing their performance can be beneficial. Therefore, a comprehensive model is presented in this study using for waste food with considerations of energy, exergy, and exergoeconomy. Several influential parameters, such as evaporator and condenser temperatures, heat pump capacity, dry and wet-basis moisture content, along with the product mass and refrigerant types, are considered in the investigation. Five environmentally-friendly refrigerants of, R134a, R1234yf, R1234ze, R717, and R152a, are used as the working fluid of the heat pump. The parametric study shows that evaporator and condenser temperatures and heat pump capacity have significant effects on the heat pump COP, exergy efficiency, drying time, and cost of dried product. Hence, assuming these four objective functions, a multi-objective optimization model based on the TOPSIS method is presented. According to this, the optimal point of the system is found at the evaporator and condenser temperatures of 10.32 °C and 69.68 °C, respectively. Results of the refrigerant analysis demonstrate that although R717 has the best energetic performance, using R1234yf results in the shortest drying time and lowest cost of dried product.

Suggested Citation

  • Deymi-Dashtebayaz, Mahdi & Davoodi, Vajihe & Khutornaya, Julia & Sergienko, Olga, 2023. "Parametric analysis and multi-objective optimization of a heat pump dryer based on working conditions and using different refrigerants," Energy, Elsevier, vol. 284(C).
    • Handle: RePEc:eee:energy:v:284:y:2023:i:c:s0360544223026257
    DOI: 10.1016/j.energy.2023.129231
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544223026257
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2023.129231?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Davoodi, Vajihe & Kazemiani-Najafabadi, Parisa & Amiri Rad, Ehsan, 2022. "Presenting a power and cascade cooling cycle driven using solar energy and natural gas," Renewable Energy, Elsevier, vol. 186(C), pages 802-813.
    2. Atalay, Halil, 2019. "Comparative assessment of solar and heat pump dryers with regards to exergy and exergoeconomic performance," Energy, Elsevier, vol. 189(C).
    3. Tayyeban, Edris & Deymi-Dashtebayaz, Mahdi & Gholizadeh, Mohammad, 2021. "Investigation of a new heat recovery system for simultaneously producing power, cooling and distillate water," Energy, Elsevier, vol. 229(C).
    4. Hamid, Khalid & Sajjad, Uzair & Yang, Kai Shing & Wu, Shih-Kuo & Wang, Chi-Chuan, 2022. "Assessment of an energy efficient closed loop heat pump dryer for high moisture contents materials: An experimental investigation and AI based modelling," Energy, Elsevier, vol. 238(PB).
    5. Abas, Naeem & Kalair, Ali Raza & Khan, Nasrullah & Haider, Aun & Saleem, Zahid & Saleem, Muhammad Shoaib, 2018. "Natural and synthetic refrigerants, global warming: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 90(C), pages 557-569.
    6. Nikitin, Andrey & Farahnak, Mehdi & Deymi-Dashtebayaz, Mahdi & Muraveinikov, Sergei & Nikitina, Veronika & Nazeri, Reza, 2022. "Effect of ice thickness and snow cover depth on performance optimization of ground source heat pump based on the energy, exergy, economic and environmental analysis," Renewable Energy, Elsevier, vol. 185(C), pages 1301-1317.
    7. Yu, Xinyi & Wu, Weidong & Wang, Jing & Jin, Yunfei & Li, Zhenbo, 2022. "Experimental study on effect of drying air supply temperature on performance of a quasi-two-stage closed loop heat pump drying system for lentinus edodes," Renewable Energy, Elsevier, vol. 201(P1), pages 1038-1049.
    8. Yu, F.W. & Chan, K.T., 2005. "Experimental determination of the energy efficiency of an air-cooled chiller under part load conditions," Energy, Elsevier, vol. 30(10), pages 1747-1758.
    9. Choi, JunYoung & Lee, DongChan & Park, Myeong Hyeon & Lee, Yongju & Kim, Yongchan, 2021. "Effects of compressor frequency and heat exchanger geometry on dynamic performance characteristics of heat pump dryers," Energy, Elsevier, vol. 235(C).
    10. Fudholi, Ahmad & Sopian, Kamaruzzaman, 2019. "A review of solar air flat plate collector for drying application," Renewable and Sustainable Energy Reviews, Elsevier, vol. 102(C), pages 333-345.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Deymi-Dashtebayaz, Mahdi & Kheir Abadi, Majid & Asadi, Mostafa & Khutornaya, Julia & Sergienko, Olga, 2024. "Investigation of a new solar-wind energy-based heat pump dryer for food waste drying based on different weather conditions," Energy, Elsevier, vol. 290(C).
    2. Kheir Abadi, Majid & Davoodi, Vajihe & Deymi-Dashtebayaz, Mahdi & Ebrahimi-Moghadam, Amir, 2023. "Determining the best scenario for providing electrical, cooling, and hot water consuming of a building with utilizing a novel wind/solar-based hybrid system," Energy, Elsevier, vol. 273(C).
    3. Yu, Mengqi & Zou, Lingeng & Yu, Jianlin, 2024. "Experimental study on effects of compressor speed on a heat pump dryer system with auxiliary solar source," Renewable Energy, Elsevier, vol. 228(C).
    4. Ghorbani, Sobhan & Deymi-Dashtebayaz, Mahdi & Dadpour, Daryoush & Delpisheh, Mostafa, 2023. "Parametric study and optimization of a novel geothermal-driven combined cooling, heating, and power (CCHP) system," Energy, Elsevier, vol. 263(PF).
    5. Zou, Lingeng & Yu, Jianlin, 2024. "4E assessment of ejector-enhanced R290 heat pump cycle with a sub-cooler for cold region applications," Energy, Elsevier, vol. 298(C).
    6. Mastrowski, Mikolaj & Smolka, Jacek & Hafner, Armin & Haida, Michal & Palacz, Michal & Banasiak, Krzysztof, 2019. "Experimental study of the heat transfer problem in expansion devices in CO2 refrigeration systems," Energy, Elsevier, vol. 173(C), pages 586-597.
    7. Zhao, Zhen & Luo, Jielin & Zou, Dexin & Yang, Kaiyin & Wang, Qin & Chen, Guangming, 2023. "Experimental investigation on the inhibition of flame retardants on the flammability of R1234ze(E)," Energy, Elsevier, vol. 263(PE).
    8. Jiang, Sufan & Gao, Shan & Pan, Guangsheng & Zhao, Xin & Liu, Yu & Guo, Yasen & Wang, Sicheng, 2020. "A novel robust security constrained unit commitment model considering HVDC regulation," Applied Energy, Elsevier, vol. 278(C).
    9. Ghavami, Morteza & Gholizadeh, Mohammad & Deymi-Dashtebayaz, Mahdi, 2023. "Parametric study and optimization analysis of a multi-generation system using waste heat in natural gas refinery- an energy and exergoeconomic analysis," Energy, Elsevier, vol. 272(C).
    10. EL-Mesery, Hany S. & EL-Seesy, Ahmed I. & Hu, Zicheng & Li, Yang, 2022. "Recent developments in solar drying technology of food and agricultural products: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 157(C).
    11. Evangelisti, Luca & De Lieto Vollaro, Roberto & Asdrubali, Francesco, 2019. "Latest advances on solar thermal collectors: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 114(C), pages 1-1.
    12. Joshua Adeniyi Depiver & Sabuj Mallik, 2023. "An Empirical Study on Convective Drying of Ginger Rhizomes Leveraging Environmental Stress Chambers and Linear Heat Conduction Methodology," Agriculture, MDPI, vol. 13(7), pages 1-28, June.
    13. Kasaeian, Alibakhsh & Hosseini, Seyed Mohsen & Sheikhpour, Mojgan & Mahian, Omid & Yan, Wei-Mon & Wongwises, Somchai, 2018. "Applications of eco-friendly refrigerants and nanorefrigerants: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 96(C), pages 91-99.
    14. Qi Chen & Yinsong Li, 2022. "Experimental Investigation on Intermittent Operation Characteristics of Dual-Temperature Refrigeration System Using Hydrocarbon Mixture," Energies, MDPI, vol. 15(11), pages 1-19, May.
    15. Alipour, Mehran & Deymi-Dashtebayaz, Mahdi & Asadi, Mostafa, 2023. "Investigation of energy, exergy, and economy of co-generation system of solar electricity and cooling using linear parabolic collector for a data center," Energy, Elsevier, vol. 279(C).
    16. Atilgan, Ramazan & Onder Turan,, 2020. "Economy and exergy of aircraft turboprop engine at dynamic loads," Energy, Elsevier, vol. 213(C).
    17. Uzair Sajjad & Imtiyaz Hussain & Muhammad Sultan & Sadaf Mehdi & Chi-Chuan Wang & Kashif Rasool & Sayed M. Saleh & Ashraf Y. Elnaggar & Enas E. Hussein, 2021. "Determining the Factors Affecting the Boiling Heat Transfer Coefficient of Sintered Coated Porous Surfaces," Sustainability, MDPI, vol. 13(22), pages 1-19, November.
    18. Vengadesan, Elumalai & Senthil, Ramalingam, 2020. "A review on recent developments in thermal performance enhancement methods of flat plate solar air collector," Renewable and Sustainable Energy Reviews, Elsevier, vol. 134(C).
    19. Zou, Lingeng & Liu, Ye & Yu, Jianlin, 2023. "Energy, exergy and economic evaluation of a solar enhanced ejector expansion heat pump cycle," Renewable Energy, Elsevier, vol. 217(C).
    20. Aghaei, Ali Tavakkol & Saray, Rahim Khoshbakhti, 2021. "Optimization of a combined cooling, heating, and power (CCHP) system with a gas turbine prime mover: A case study in the dairy industry," Energy, Elsevier, vol. 229(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:284:y:2023:i:c:s0360544223026257. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.