IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v283y2023ics0360544223026014.html
   My bibliography  Save this article

Wind load and load-carrying optical performance of a large solar dish/stirling power system with 17.7 m diameter

Author

Listed:
  • Yan, Jian
  • Peng, YouDuo
  • Liu, YongXiang

Abstract

Solar dish/Stirling power systems operating in open terrain, the optical performance is very sensitive to wind load because of their large windward area and poor wind permeability, so it is especially important to evaluate the optical performance under wind load. In this paper, a large 38 kW dish/Stirling system with 17.7 m diameter (named XEM-Dish system) is used, the wind loads are simulated and analyzed under 35 sets of wind conditions (17.1 m/s wind speed) with combination of wind direction angle θ∈[0°, 180°] and elevation angle β∈[0°, 90°], the correctness was verified by literature's results. Using an optical-mechanical integrated method, the effects of combined self-weight and wind load on its structural deformation, mirror slope error and flux distribution are evaluated, the main causes and manifestations of the optical deterioration of XEM-Dish system caused by wind load are found, which is similar to deviate-focusing problem affected by tracking errors. Only concentrator is deformed, the mirror slope error components SDx and SDy reach maximum value of 1.755 mrad and 1.828 mrad at worst 45°–0° condition, but optical efficiency still remains at 89.06%, which is excellent. When XEM-Dish system overall deformation, the SDx reached 7.702 mrad and flux distribution is extremely uneven at worst 45°–0° condition, but optical efficiency still reaches about 87.0%.

Suggested Citation

  • Yan, Jian & Peng, YouDuo & Liu, YongXiang, 2023. "Wind load and load-carrying optical performance of a large solar dish/stirling power system with 17.7 m diameter," Energy, Elsevier, vol. 283(C).
    • Handle: RePEc:eee:energy:v:283:y:2023:i:c:s0360544223026014
    DOI: 10.1016/j.energy.2023.129207
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544223026014
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2023.129207?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Yan, Jian & Peng, YouDuo & Liu, YongXiang, 2023. "Optical performance evaluation of a large solar dish/Stirling power generation system under self-weight load based on optical-mechanical integration method," Energy, Elsevier, vol. 264(C).
    2. Christo, Farid C., 2012. "Numerical modelling of wind and dust patterns around a full-scale paraboloidal solar dish," Renewable Energy, Elsevier, vol. 39(1), pages 356-366.
    3. Reddy, K.S. & Singla, Hitesh & Natraj,, 2019. "Gravity & wind load analysis and optical study of solar parabolic trough collector with composite facets using optimized modelling approach," Energy, Elsevier, vol. 189(C).
    4. Hafez, A.Z. & Soliman, Ahmed & El-Metwally, K.A. & Ismail, I.M., 2017. "Design analysis factors and specifications of solar dish technologies for different systems and applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 67(C), pages 1019-1036.
    5. Malan, Anish & Kumar, K. Ravi, 2022. "Investigation on wind-structure interaction of large aperture parabolic trough solar collector," Renewable Energy, Elsevier, vol. 193(C), pages 309-333.
    6. Jian, Yan & Peng, You Duo & Liu, Yong Xiang, 2022. "An optical-mechanical integrated modeling method of solar dish concentrator system for optical performance analysis under service load," Energy, Elsevier, vol. 261(PB).
    7. Zuo, Hongyan & Tan, Jiqiu & Wei, Kexiang & Huang, Zhonghua & Zhong, Dingqing & Xie, Fuchun, 2021. "Effects of different poses and wind speeds on wind-induced vibration characteristics of a dish solar concentrator system," Renewable Energy, Elsevier, vol. 168(C), pages 1308-1326.
    8. Sun, Honghang & Gong, Bo & Yao, Qiang, 2014. "A review of wind loads on heliostats and trough collectors," Renewable and Sustainable Energy Reviews, Elsevier, vol. 32(C), pages 206-221.
    9. Meiser, S. & Schneider, S. & Lüpfert, E. & Schiricke, B. & Pitz-Paal, R., 2017. "Evaluation and assessment of gravity load on mirror shape and focusing quality of parabolic trough solar mirrors using finite-element analysis," Applied Energy, Elsevier, vol. 185(P2), pages 1210-1216.
    10. He, Ya-Ling & Qiu, Yu & Wang, Kun & Yuan, Fan & Wang, Wen-Qi & Li, Ming-Jia & Guo, Jia-Qi, 2020. "Perspective of concentrating solar power," Energy, Elsevier, vol. 198(C).
    11. Winkelmann, Ulf & Kämper, Christoph & Höffer, Rüdiger & Forman, Patrick & Ahrens, Mark Alexander & Mark, Peter, 2020. "Wind actions on large-aperture parabolic trough solar collectors: Wind tunnel tests and structural analysis," Renewable Energy, Elsevier, vol. 146(C), pages 2390-2407.
    12. Tan, Ming-Hui & Chong, Kok-Keong, 2016. "Influence of self-weight on electrical power conversion of dense-array concentrator photovoltaic system," Renewable Energy, Elsevier, vol. 87(P1), pages 445-457.
    13. Yan, Jian & Liu, Yong-xiang & Peng, You-Duo, 2022. "Study on the optical performance of novel dish solar concentrator formed by rotating array of plane mirrors with the same size," Renewable Energy, Elsevier, vol. 195(C), pages 416-430.
    14. Ktistis, Panayiotis & Agathokleous, Rafaela A. & Kalogirou, Soteris A., 2022. "A design tool for a parabolic trough collector system for industrial process heat based on dynamic simulation," Renewable Energy, Elsevier, vol. 183(C), pages 502-514.
    15. Natraj, & Rao, B.N. & Reddy, K.S., 2021. "Wind load and structural analysis for standalone solar parabolic trough collector," Renewable Energy, Elsevier, vol. 173(C), pages 688-703.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Yan, Jian & Peng, YouDuo & Liu, YongXiang, 2023. "Optical performance evaluation of a large solar dish/Stirling power generation system under self-weight load based on optical-mechanical integration method," Energy, Elsevier, vol. 264(C).
    2. Liu, YongXiang & Yan, Jian & Xie, XinYi & Peng, YouDuo & Nie, DuZhong, 2023. "Improving the energy distribution uniformity of solar dish collector system under tracking error using a cavity receiver position adjustment method," Energy, Elsevier, vol. 278(PA).
    3. Malan, Anish & Kumar, K. Ravi, 2022. "Investigation on wind-structure interaction of large aperture parabolic trough solar collector," Renewable Energy, Elsevier, vol. 193(C), pages 309-333.
    4. Jian, Yan & Peng, You Duo & Liu, Yong Xiang, 2022. "An optical-mechanical integrated modeling method of solar dish concentrator system for optical performance analysis under service load," Energy, Elsevier, vol. 261(PB).
    5. Graham, Philip & Fadlallah, Sulaiman O. & Boulbrachene, Khaled, 2024. "Wind incidence and pedestal height effect on the flow behaviour and aerodynamic loading on a stand-alone solar parabolic dish," Renewable Energy, Elsevier, vol. 227(C).
    6. Yan, Jian & Liu, Yong-xiang & Peng, You-Duo, 2022. "Study on the optical performance of novel dish solar concentrator formed by rotating array of plane mirrors with the same size," Renewable Energy, Elsevier, vol. 195(C), pages 416-430.
    7. Wiesinger, F. & Sutter, F. & Fernández-García, A. & Wette, J. & Hanrieder, N., 2021. "Sandstorm erosion on solar reflectors: A field study on height and orientation dependence," Energy, Elsevier, vol. 217(C).
    8. Zuo, Hongyan & Tan, Jiqiu & Wei, Kexiang & Huang, Zhonghua & Zhong, Dingqing & Xie, Fuchun, 2021. "Effects of different poses and wind speeds on wind-induced vibration characteristics of a dish solar concentrator system," Renewable Energy, Elsevier, vol. 168(C), pages 1308-1326.
    9. Natraj, & Reddy, K.S., 2023. "Investigations of thermo-structural instability on the performance of solar parabolic trough collectors," Renewable Energy, Elsevier, vol. 202(C), pages 381-393.
    10. Rahimi Telwar, Donya & Khodaei, Jalal & Samimi-Akhijahani, Hadi, 2024. "Thermo-economic evaluation and structural simulation of a parabolic solar collector (PTC) integrated with a desalination system," Energy, Elsevier, vol. 299(C).
    11. Vengadesan, Elumalai & Ismail Rumaney, Abdul Rahim & Mitra, Rohan & Harichandan, Sattwik & Senthil, Ramalingam, 2022. "Heat transfer enhancement of a parabolic trough solar collector using a semicircular multitube absorber," Renewable Energy, Elsevier, vol. 196(C), pages 111-124.
    12. Yunhong Shi & Davood Toghraie & Farzad Nadi & Gholamreza Ahmadi & As’ad Alizadeh & Long Zhang, 2021. "The effect of the pitch angle, two-axis tracking system, and wind velocity on the parabolic trough solar collector thermal performance," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 23(12), pages 17329-17348, December.
    13. Mammar, Mohamed & Djouimaa, Sihem & Gärtner, Ulrich & Hamidat, Abderrahmane, 2018. "Wind loads on heliostats of various column heights: An experimental study," Energy, Elsevier, vol. 143(C), pages 867-880.
    14. Adis Puška & Miroslav Nedeljković & Branislav Dudić & Anđelka Štilić & Alexandra Mittelman, 2024. "Improving Agricultural Sustainability in Bosnia and Herzegovina through Renewable Energy Integration," Economies, MDPI, vol. 12(8), pages 1-15, July.
    15. Xiao, Gang & Zheng, Guanghua & Ni, Dong & Li, Qiang & Qiu, Min & Ni, Mingjiang, 2018. "Thermodynamic assessment of solar photon-enhanced thermionic conversion," Applied Energy, Elsevier, vol. 223(C), pages 134-145.
    16. Bai, Wengang & Li, Hongzhi & Zhang, Xuwei & Qiao, Yongqiang & Zhang, Chun & Gao, Wei & Yao, Mingyu, 2022. "Thermodynamic analysis of CO2–SF6 mixture working fluid supercritical Brayton cycle used for solar power plants," Energy, Elsevier, vol. 261(PB).
    17. Avila-Marin, Antonio L. & Fernandez-Reche, Jesus & Carballo, Jose Antonio & Carra, Maria Elena & Gianella, Sandro & Ferrari, Luca & Sanchez-Señoran, Daniel, 2022. "CFD analysis of the performance impact of geometrical shape on volumetric absorbers in a standard cup," Renewable Energy, Elsevier, vol. 201(P1), pages 256-272.
    18. Ma, Ruihua & Ma, Dongyan & Ma, Ruijiang & Long, Enshen, 2022. "Theoretical and experimental analysis of temperature variation of V–Ti black ceramic solar collector," Renewable Energy, Elsevier, vol. 194(C), pages 1153-1162.
    19. Li, Xueling & Li, Renfu & Chang, Huawei & Zeng, Lijian & Xi, Zhaojun & Li, Yichao, 2022. "Numerical simulation of a cavity receiver enhanced with transparent aerogel for parabolic dish solar power generation," Energy, Elsevier, vol. 246(C).
    20. Ajbar, Wassila & Parrales, A. & Huicochea, A. & Hernández, J.A., 2022. "Different ways to improve parabolic trough solar collectors’ performance over the last four decades and their applications: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 156(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:283:y:2023:i:c:s0360544223026014. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.