IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v261y2022ipbs0360544222021685.html
   My bibliography  Save this article

An optical-mechanical integrated modeling method of solar dish concentrator system for optical performance analysis under service load

Author

Listed:
  • Jian, Yan
  • Peng, You Duo
  • Liu, Yong Xiang

Abstract

Solar dish concentrator system (SDC system) is an optical device that provides a high-temperature heat source for Stirling engine. However, due to its heavy structural and large windward area, it is easy to be deformed by self-weight or wind load during service, which leads to changes the mirror shape and receiver position of SDC system, thus deteriorating its optical performance. In order to predict and evaluate the optical performance and flux distribution of SDC system under service load, this paper proposes an optical-mechanical integrated modeling method considering the deformation of SDC system by combining the finite element method and ray-tracing method. It discretizes mirror surface into a large number of plane element, and directly establishes the optical model by its deformation information, which is suitable for any concentrator using mirrors. The modeling process is derived, including the optical model of concentrator under non-deformation and deformation, spatial position model and flux distribution model of the receiver, mirror shape error model. Finally, the modeling method is verified by examples and literature results, the flux distribution and mirror shape error calculated by this method are in good agreement with comparison results, and relative error ranges from 0.6% to 5.6%.

Suggested Citation

  • Jian, Yan & Peng, You Duo & Liu, Yong Xiang, 2022. "An optical-mechanical integrated modeling method of solar dish concentrator system for optical performance analysis under service load," Energy, Elsevier, vol. 261(PB).
    • Handle: RePEc:eee:energy:v:261:y:2022:i:pb:s0360544222021685
    DOI: 10.1016/j.energy.2022.125283
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544222021685
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2022.125283?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Thalange, Vinayak C. & Dalvi, Vishwanath H. & Mahajani, Sanjay M. & Panse, Sudhir V. & Joshi, Jyeshtharaj B. & Patil, Raosaheb N., 2017. "Design, optimization and optical performance study of tripod heliostat for solar power tower plant," Energy, Elsevier, vol. 135(C), pages 610-624.
    2. Daabo, Ahmed M. & Mahmoud, Saad & Al-Dadah, Raya K., 2016. "The effect of receiver geometry on the optical performance of a small-scale solar cavity receiver for parabolic dish applications," Energy, Elsevier, vol. 114(C), pages 513-525.
    3. Hafez, A.Z. & Soliman, Ahmed & El-Metwally, K.A. & Ismail, I.M., 2017. "Design analysis factors and specifications of solar dish technologies for different systems and applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 67(C), pages 1019-1036.
    4. Meiser, S. & Schneider, S. & Lüpfert, E. & Schiricke, B. & Pitz-Paal, R., 2017. "Evaluation and assessment of gravity load on mirror shape and focusing quality of parabolic trough solar mirrors using finite-element analysis," Applied Energy, Elsevier, vol. 185(P2), pages 1210-1216.
    5. Yan, Jian & Peng, You-duo & Cheng, Zi-ran, 2018. "Optimization of a discrete dish concentrator for uniform flux distribution on the cavity receiver of solar concentrator system," Renewable Energy, Elsevier, vol. 129(PA), pages 431-445.
    6. He, Ya-Ling & Qiu, Yu & Wang, Kun & Yuan, Fan & Wang, Wen-Qi & Li, Ming-Jia & Guo, Jia-Qi, 2020. "Perspective of concentrating solar power," Energy, Elsevier, vol. 198(C).
    7. Xiao, Lan & He, Song & Shen, Zu-Guo & Wu, Shuang-Ying & Chen, Zhi-Li, 2022. "Wind-induced convective heat loss of cylindrical receiver considering the effect of dish concentrator," Renewable Energy, Elsevier, vol. 182(C), pages 900-912.
    8. Kasaeian, Alibakhsh & Kouravand, Amir & Vaziri Rad, Mohammad Amin & Maniee, Siavash & Pourfayaz, Fathollah, 2021. "Cavity receivers in solar dish collectors: A geometric overview," Renewable Energy, Elsevier, vol. 169(C), pages 53-79.
    9. Tan, Ming-Hui & Chong, Kok-Keong, 2016. "Influence of self-weight on electrical power conversion of dense-array concentrator photovoltaic system," Renewable Energy, Elsevier, vol. 87(P1), pages 445-457.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Xiao, Yang & Bao, Yanqiong & Yu, Linfeng & Zheng, Xiong & Qin, Guangzhao & Chen, Meijie & He, Maogang, 2023. "Ultra-stable carbon quantum dot nanofluids as excellent spectral beam splitters in PV/T applications," Energy, Elsevier, vol. 273(C).
    2. Yan, Jian & Peng, YouDuo & Liu, YongXiang, 2023. "Optical performance evaluation of a large solar dish/Stirling power generation system under self-weight load based on optical-mechanical integration method," Energy, Elsevier, vol. 264(C).
    3. Yan, Jian & Peng, YouDuo & Liu, YongXiang, 2023. "Wind load and load-carrying optical performance of a large solar dish/stirling power system with 17.7 m diameter," Energy, Elsevier, vol. 283(C).
    4. Liu, YongXiang & Yan, Jian & Xie, XinYi & Peng, YouDuo & Nie, DuZhong, 2023. "Improving the energy distribution uniformity of solar dish collector system under tracking error using a cavity receiver position adjustment method," Energy, Elsevier, vol. 278(PA).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Yan, Jian & Peng, YouDuo & Liu, YongXiang, 2023. "Optical performance evaluation of a large solar dish/Stirling power generation system under self-weight load based on optical-mechanical integration method," Energy, Elsevier, vol. 264(C).
    2. Yan, Jian & Peng, YouDuo & Liu, YongXiang, 2023. "Wind load and load-carrying optical performance of a large solar dish/stirling power system with 17.7 m diameter," Energy, Elsevier, vol. 283(C).
    3. Yan, Jian & Liu, Yong-xiang & Peng, You-Duo, 2022. "Study on the optical performance of novel dish solar concentrator formed by rotating array of plane mirrors with the same size," Renewable Energy, Elsevier, vol. 195(C), pages 416-430.
    4. Liu, YongXiang & Yan, Jian & Xie, XinYi & Peng, YouDuo & Nie, DuZhong, 2023. "Improving the energy distribution uniformity of solar dish collector system under tracking error using a cavity receiver position adjustment method," Energy, Elsevier, vol. 278(PA).
    5. Sun, Lulening & Zong, Chenggang & Yu, Liang & Huang, Weidong, 2019. "Evaluation of solar brightness distribution models for performance simulation and optimization of solar dish," Energy, Elsevier, vol. 180(C), pages 192-205.
    6. Tang, Xin-Yuan & Zhang, Kai-Ran & Yang, Wei-Wei & Dou, Pei-Yuan, 2023. "Integrated design of solar concentrator and thermochemical reactor guided by optimal solar radiation distribution," Energy, Elsevier, vol. 263(PB).
    7. Hassan, Atazaz & Quanfang, Chen & Abbas, Sajid & Lu, Wu & Youming, Luo, 2021. "An experimental investigation on thermal and optical analysis of cylindrical and conical cavity copper tube receivers design for solar dish concentrator," Renewable Energy, Elsevier, vol. 179(C), pages 1849-1864.
    8. Danish, Syed Noman & Al-Ansary, Hany & El-Leathy, Abdelrahman & Ba-Abbad, Mazen & Khan, Salah Ud-Din & Rizvi, Arslan & Orfi, Jamel & Al-Nakhli, Ahmed, 2022. "Experimental and techno-economic analysis of two innovative solar thermal receiver designs for a point focus solar Fresnel collector," Energy, Elsevier, vol. 261(PA).
    9. Li, Xueling & Li, Renfu & Chang, Huawei & Zeng, Lijian & Xi, Zhaojun & Li, Yichao, 2022. "Numerical simulation of a cavity receiver enhanced with transparent aerogel for parabolic dish solar power generation," Energy, Elsevier, vol. 246(C).
    10. Soltani, Sara & Bonyadi, Mohammad & Madadi Avargani, Vahid, 2019. "A novel optical-thermal modeling of a parabolic dish collector with a helically baffled cylindrical cavity receiver," Energy, Elsevier, vol. 168(C), pages 88-98.
    11. Rajan, Abhinav & Reddy, K.S., 2023. "Integrated optical and thermal model to investigate the performance of a solar parabolic dish collector coupled with a cavity receiver," Renewable Energy, Elsevier, vol. 219(P1).
    12. Kasaeian, Alibakhsh & Kouravand, Amir & Vaziri Rad, Mohammad Amin & Maniee, Siavash & Pourfayaz, Fathollah, 2021. "Cavity receivers in solar dish collectors: A geometric overview," Renewable Energy, Elsevier, vol. 169(C), pages 53-79.
    13. Zuo, Hongyan & Tan, Jiqiu & Wei, Kexiang & Huang, Zhonghua & Zhong, Dingqing & Xie, Fuchun, 2021. "Effects of different poses and wind speeds on wind-induced vibration characteristics of a dish solar concentrator system," Renewable Energy, Elsevier, vol. 168(C), pages 1308-1326.
    14. Chen, Yuxuan & Wang, Ding & Zou, Chongzhe & Gao, Wei & Zhang, Yanping, 2022. "Thermal performance and thermal stress analysis of a supercritical CO2 solar conical receiver under different flow directions," Energy, Elsevier, vol. 246(C).
    15. Martínez-Manuel, Leopoldo & Wang, Wujun & Laumert, Björn & Peña-Cruz, Manuel I., 2021. "Numerical analysis on the optical geometrical optimization for an axial type impinging solar receiver," Energy, Elsevier, vol. 216(C).
    16. Indora, Sunil & Kandpal, Tara C., 2018. "Institutional cooking with solar energy: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 84(C), pages 131-154.
    17. Yuan, Yu & Wu, Gang & Yang, Qichang & Cheng, Ruifeng & Tong, Yuxin & Zhang, Yi & Fang, Hui & Ma, Qianlei, 2021. "Experimental and analytical optical-thermal performance of evacuated cylindrical tube receiver for solar dish collector," Energy, Elsevier, vol. 234(C).
    18. Li, Qing & Wang, Jikang & Qiu, Yu & Xu, Mingpan & Wei, Xiudong, 2021. "A modified indirect flux mapping system for high-flux solar simulators," Energy, Elsevier, vol. 235(C).
    19. Liu, Fanmao & Wu, Ke & Rao, Zaixing & Peng, Youduo, 2019. "Spatial layouts and absorbing surface design of heater tube arrays of direct-illumination receiver used in high power dish/stirling system," Energy, Elsevier, vol. 188(C).
    20. Adis Puška & Miroslav Nedeljković & Branislav Dudić & Anđelka Štilić & Alexandra Mittelman, 2024. "Improving Agricultural Sustainability in Bosnia and Herzegovina through Renewable Energy Integration," Economies, MDPI, vol. 12(8), pages 1-15, July.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:261:y:2022:i:pb:s0360544222021685. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.