IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v189y2019ics0360544219317608.html
   My bibliography  Save this article

Gravity & wind load analysis and optical study of solar parabolic trough collector with composite facets using optimized modelling approach

Author

Listed:
  • Reddy, K.S.
  • Singla, Hitesh
  • Natraj,

Abstract

In the present work, structural and optical analysis of 23.08 m2 (Aaperture) solar parabolic trough has been done utilizing different composite materials with an optimized modelling approach. The linear parabolic trough collector is subjected to gravity and wind loads and thereby it undergoes surface deformations. Various trough materials are structurally analysed and a hybrid composite is designed. The RMS values of local slope deviations of trough termed as SD value is calculated using Modified Element Approach to observe the behaviour of trough at various tracking positions varying from 0° to 90° orientations. The cases been discussed are trough-alone (stiff) case and full collector (elastic) case under gravity and wind loading conditions with wind speed of 15 m/s. Trough parameters like fibre orientation of laminae, stacking sequence and direction and size of reinforcement conduits are optimized to minimize SD values. Furthermore, the setup is optically studied and the slope deviations are compared for individual models through intercept factors (γ). The comparative study reveals that the solar parabolic trough collector with its facets made of woven jute/glass fibre-reinforced polyester hybrid composite material yields γmax = 0.957 for avg. SD = 1.34 mrad in stiff case and γmax = 0.955 for avg. SD = 1.349 mrad in elastic case under gravity load, and γmax = 0.866 for avg. SD = 3.78 mrad in stiff case and γmax = 0.863 for avg. SD = 3.81 mrad in elastic case under both wind and gravity loads, resulting to be the best among considered models. Maximum weight reduction of up to 30% in stiff case and up to 4.5% in elastic case has also been observed compared to conventional glass collector for hybrid composite model thus reducing the tracking power and producing a cost effective system.

Suggested Citation

  • Reddy, K.S. & Singla, Hitesh & Natraj,, 2019. "Gravity & wind load analysis and optical study of solar parabolic trough collector with composite facets using optimized modelling approach," Energy, Elsevier, vol. 189(C).
    • Handle: RePEc:eee:energy:v:189:y:2019:i:c:s0360544219317608
    DOI: 10.1016/j.energy.2019.116065
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544219317608
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2019.116065?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Reddy, K.S. & Ananthsornaraj, C., 2020. "Design, development and performance investigation of solar Parabolic Trough Collector for large-scale solar power plants," Renewable Energy, Elsevier, vol. 146(C), pages 1943-1957.
    2. Sun, Honghang & Gong, Bo & Yao, Qiang, 2014. "A review of wind loads on heliostats and trough collectors," Renewable and Sustainable Energy Reviews, Elsevier, vol. 32(C), pages 206-221.
    3. Kalogirou, Soteris & Eleftheriou, Polyvios & Lloyd, Stephen & Ward, John, 1994. "Low cost high accuracy parabolic troughs construction and evaluation," Renewable Energy, Elsevier, vol. 5(1), pages 384-386.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Chinnasamy Subramaniyan & Jothirathinam Subramani & Balasubramanian Kalidasan & Natarajan Anbuselvan & Thangaraj Yuvaraj & Natarajan Prabaharan & Tomonobu Senjyu, 2021. "Investigation on the Optical Design and Performance of a Single-Axis-Tracking Solar Parabolic trough Collector with a Secondary Reflector," Sustainability, MDPI, vol. 13(17), pages 1-19, September.
    2. Malan, Anish & Kumar, K. Ravi, 2022. "Investigation on wind-structure interaction of large aperture parabolic trough solar collector," Renewable Energy, Elsevier, vol. 193(C), pages 309-333.
    3. Natraj, & Reddy, K.S., 2023. "Investigations of thermo-structural instability on the performance of solar parabolic trough collectors," Renewable Energy, Elsevier, vol. 202(C), pages 381-393.
    4. Yan, Jian & Peng, YouDuo & Liu, YongXiang, 2023. "Wind load and load-carrying optical performance of a large solar dish/stirling power system with 17.7 m diameter," Energy, Elsevier, vol. 283(C).
    5. Yunhong Shi & Davood Toghraie & Farzad Nadi & Gholamreza Ahmadi & As’ad Alizadeh & Long Zhang, 2021. "The effect of the pitch angle, two-axis tracking system, and wind velocity on the parabolic trough solar collector thermal performance," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 23(12), pages 17329-17348, December.
    6. Natraj, & Rao, B.N. & Reddy, K.S., 2021. "Wind load and structural analysis for standalone solar parabolic trough collector," Renewable Energy, Elsevier, vol. 173(C), pages 688-703.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Natraj, & Rao, B.N. & Reddy, K.S., 2021. "Wind load and structural analysis for standalone solar parabolic trough collector," Renewable Energy, Elsevier, vol. 173(C), pages 688-703.
    2. Mammar, Mohamed & Djouimaa, Sihem & Gärtner, Ulrich & Hamidat, Abderrahmane, 2018. "Wind loads on heliostats of various column heights: An experimental study," Energy, Elsevier, vol. 143(C), pages 867-880.
    3. Ajbar, Wassila & Parrales, A. & Huicochea, A. & Hernández, J.A., 2022. "Different ways to improve parabolic trough solar collectors’ performance over the last four decades and their applications: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 156(C).
    4. Yan, Jian & Peng, YouDuo & Liu, YongXiang, 2023. "Wind load and load-carrying optical performance of a large solar dish/stirling power system with 17.7 m diameter," Energy, Elsevier, vol. 283(C).
    5. Coccia, Gianluca & Di Nicola, Giovanni & Sotte, Marco, 2015. "Design, manufacture, and test of a prototype for a parabolic trough collector for industrial process heat," Renewable Energy, Elsevier, vol. 74(C), pages 727-736.
    6. Hao, Menghao & Chen, Lizhi & Chen, Jianxun & Lu, Luyi & Li, Jianlan, 2022. "Safety and efficiency assessment of absorber with an initial offset in a parabolic trough collector," Renewable Energy, Elsevier, vol. 187(C), pages 774-789.
    7. Rehman, Shafiqur, 2014. "Tower distortion and scatter factors of co-located wind speed sensors and turbulence intensity behavior," Renewable and Sustainable Energy Reviews, Elsevier, vol. 34(C), pages 20-29.
    8. Wiesinger, F. & Sutter, F. & Fernández-García, A. & Wette, J. & Hanrieder, N., 2021. "Sandstorm erosion on solar reflectors: A field study on height and orientation dependence," Energy, Elsevier, vol. 217(C).
    9. Bendjebbas, H. & Abdellah-ElHadj, A. & Abbas, M., 2016. "Full-scale, wind tunnel and CFD analysis methods of wind loads on heliostats: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 54(C), pages 452-472.
    10. Han, Yu & Sun, Yingying & Wu, Junjie, 2021. "A low-cost and efficient solar/coal hybrid power generation mode: Integration of non-concentrating solar energy and air preheating process," Energy, Elsevier, vol. 235(C).
    11. Kalogirou, Soteris, 1996. "Parabolic trough collector system for low temperature steam generation: Design and performance characteristics," Applied Energy, Elsevier, vol. 55(1), pages 1-19, September.
    12. Kalogirou, Soteris, 1997. "Design, construction, performance evaluation and economic analysis of an integrated collector storage system," Renewable Energy, Elsevier, vol. 12(2), pages 179-192.
    13. Mahfuzur Rahman & Solaiman Chowdhury & Mohammad Shorfuzzaman & Mohammad Kamal Hossain & Mohammad Hammoudeh, 2023. "Peer-to-Peer Power Energy Trading in Blockchain Using Efficient Machine Learning Model," Sustainability, MDPI, vol. 15(18), pages 1-15, September.
    14. Natraj, & Reddy, K.S., 2023. "Investigations of thermo-structural instability on the performance of solar parabolic trough collectors," Renewable Energy, Elsevier, vol. 202(C), pages 381-393.
    15. Alamdari, Pedram & Khatamifar, Mehdi & Lin, Wenxian, 2024. "Heat loss analysis review: Parabolic trough and linear Fresnel collectors," Renewable and Sustainable Energy Reviews, Elsevier, vol. 199(C).
    16. Rodriguez-Sanchez, David & Rosengarten, Gary, 2015. "Improving the concentration ratio of parabolic troughs using a second-stage flat mirror," Applied Energy, Elsevier, vol. 159(C), pages 620-632.
    17. Chen, Heng & Mansir, Ibrahim B. & Chauhan, Bhupendra Singh & Al-Zahrani, Ahmed & Deifalla, Ahmed & Hua, Yinhai & Peng, Fan, 2023. "A comprehensive numerical study on the effectiveness of a rotational-based PTC collector integrated porous foam and PV module," Renewable Energy, Elsevier, vol. 215(C).
    18. Winkelmann, Ulf & Kämper, Christoph & Höffer, Rüdiger & Forman, Patrick & Ahrens, Mark Alexander & Mark, Peter, 2020. "Wind actions on large-aperture parabolic trough solar collectors: Wind tunnel tests and structural analysis," Renewable Energy, Elsevier, vol. 146(C), pages 2390-2407.
    19. Yunhong Shi & Davood Toghraie & Farzad Nadi & Gholamreza Ahmadi & As’ad Alizadeh & Long Zhang, 2021. "The effect of the pitch angle, two-axis tracking system, and wind velocity on the parabolic trough solar collector thermal performance," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 23(12), pages 17329-17348, December.
    20. Guler, Omer Faruk & Sen, Ozan & Yilmaz, Ceyhun & Kanoglu, Mehmet, 2022. "Performance evaluation of a geothermal and solar-based multigeneration system and comparison with alternative case studies: Energy, exergy, and exergoeconomic aspects," Renewable Energy, Elsevier, vol. 200(C), pages 1517-1532.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:189:y:2019:i:c:s0360544219317608. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.