IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v283y2023ics0360544223025161.html
   My bibliography  Save this article

Experimental study on improving cold start performance of diesel engines at extremely low ambient temperatures with diethyl ether

Author

Listed:
  • Sun, Hao
  • Zhang, Wugao
  • Wang, Yixuan

Abstract

How to achieve a fast and reliable cold start of diesel engines at extremely low temperatures is a significant and longstanding problem. In this study, a precise amount of diethyl ether was premixed in the intake to facilitate the starting at extremely low ambient temperatures down to −40 °C. The study investigated the effects of diesel fuel injection strategies, diethyl ether concentration, and ambient temperature on the cold-start performance. Additionally, an analysis was conducted on energy consumption and heat loss during the cold start period. The test engine could start quickly and steadily when diethyl ether was premixed in the intake. This was achieved by optimizing the diesel injection quantity to 60% of the original quantity and retarding the injection timing from 6 oCA BTDC to 2 oCA BTDC. The engine exhibited reliable starting at −40 °C when 2.0% v/v diethyl ether was premixed. However, excessive direct injection of diesel had an adverse effect on fuel ignition at such extremely low temperatures. Moreover, the electricity consumption was much lower with diethyl ether premixed in the intake than that with an electric intake heater, greatly reducing the requirements for starting batteries during the cold start under extremely low-temperature conditions.

Suggested Citation

  • Sun, Hao & Zhang, Wugao & Wang, Yixuan, 2023. "Experimental study on improving cold start performance of diesel engines at extremely low ambient temperatures with diethyl ether," Energy, Elsevier, vol. 283(C).
    • Handle: RePEc:eee:energy:v:283:y:2023:i:c:s0360544223025161
    DOI: 10.1016/j.energy.2023.129122
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544223025161
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2023.129122?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Adrian Clenci & Rodica Niculescu & Amélie Danlos & Victor Iorga-Simăn & Alina Trică, 2016. "Impact of Biodiesel Blends and Di-Ethyl-Ether on the Cold Starting Performance of a Compression Ignition Engine," Energies, MDPI, vol. 9(4), pages 1-19, April.
    2. E, Jiaqiang & Liu, Guanlin & Zhang, Zhiqing & Han, Dandan & Chen, Jingwei & Wei, Kexiang & Gong, Jinke & Yin, Zibin, 2019. "Effect analysis on cold starting performance enhancement of a diesel engine fueled with biodiesel fuel based on an improved thermodynamic model," Applied Energy, Elsevier, vol. 243(C), pages 321-335.
    3. Deng, Yuanwang & Liu, Huawei & Zhao, Xiaohuan & E, Jiaqiang & Chen, Jianmei, 2018. "Effects of cold start control strategy on cold start performance of the diesel engine based on a comprehensive preheat diesel engine model," Applied Energy, Elsevier, vol. 210(C), pages 279-287.
    4. Li, Yikai & Wang, Dongfang & Shi, Zhongjie & Chen, Haiyan & Liu, Fushui, 2021. "Environment-adaptive method to control intake preheating for diesel engines at cold-start conditions," Energy, Elsevier, vol. 227(C).
    5. Chao-Yang Wang & Guangsheng Zhang & Shanhai Ge & Terrence Xu & Yan Ji & Xiao-Guang Yang & Yongjun Leng, 2016. "Lithium-ion battery structure that self-heats at low temperatures," Nature, Nature, vol. 529(7587), pages 515-518, January.
    6. Pastor, J.V. & Bermúdez, V. & García-Oliver, J.M. & Ramírez-Hernández, J.G., 2011. "Influence of spray-glow plug configuration on cold start combustion for high-speed direct injection diesel engines," Energy, Elsevier, vol. 36(9), pages 5486-5496.
    7. Broatch, A. & Ruiz, S. & Margot, X. & Gil, A., 2010. "Methodology to estimate the threshold in-cylinder temperature for self-ignition of fuel during cold start of Diesel engines," Energy, Elsevier, vol. 35(5), pages 2251-2260.
    8. Lawler, Benjamin & Lacey, Joshua & Güralp, Orgun & Najt, Paul & Filipi, Zoran, 2018. "HCCI combustion with an actively controlled glow plug: The effects on heat release, thermal stratification, efficiency, and emissions," Applied Energy, Elsevier, vol. 211(C), pages 809-819.
    9. Ä°smet Sezer, 2020. "A review study on using diethyl ether in diesel engines: Effects on fuel properties, injection, and combustion characteristics," Energy & Environment, , vol. 31(2), pages 179-214, March.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Song, Yue & Zhou, Yu & Zhao, Shuai & Du, Fa-rong & Li, Xue-yu & Zhu, Kun & Yan, Huan-song & Xu, Zheng & Ding, Shui-ting, 2024. "Cyclic coupling and working characteristics analysis of a novel combined cycle engine concept for aviation applications," Energy, Elsevier, vol. 301(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Xuewen Zhang & Xiang Huang & Peiyong Ni & Xiang Li, 2023. "Strategies to Reduce Emissions from Diesel Engines under Cold Start Conditions: A Review," Energies, MDPI, vol. 16(13), pages 1-21, July.
    2. Lu, Kangbo & Qiu, Hongjian & Chen, Ziqiang & Shi, Lei & Deng, Kangyao, 2023. "Environmental adaptability method for improving the cold start performance of the diesel engine based on pilot injection strategy," Energy, Elsevier, vol. 281(C).
    3. Zhao, Xiaohuan & E, Jiaqiang & Zhang, Zhiqing & Chen, Jingwei & Liao, Gaoliang & Zhang, Feng & Leng, Erwei & Han, Dandan & Hu, Wenyu, 2020. "A review on heat enhancement in thermal energy conversion and management using Field Synergy Principle," Applied Energy, Elsevier, vol. 257(C).
    4. Deng, Yuanwang & Feng, Changling & E, Jiaqiang & Wei, Kexiang & Zhang, Bin & Zhang, Zhiqing & Han, Dandan & Zhao, Xiaohuan & Xu, Wenwen, 2019. "Performance enhancement of the gasoline engine hydrocarbon catchers for reducing hydrocarbon emission during the cold-start period," Energy, Elsevier, vol. 183(C), pages 869-879.
    5. Zhishuang Li & Ziman Wang & Haoyang Mo & Han Wu, 2022. "Effect of the Air Flow on the Combustion Process and Preheating Effect of the Intake Manifold Burner," Energies, MDPI, vol. 15(9), pages 1-17, April.
    6. Kan, Zechao & Hu, Zhiyuan & Lou, Diming & Tan, Piqiang & Cao, Zhiyi & Yang, Zhenhuan, 2018. "Effects of altitude on combustion and ignition characteristics of speed-up period during cold start in a diesel engine," Energy, Elsevier, vol. 150(C), pages 164-175.
    7. Doppalapudi, A.T. & Azad, A.K. & Khan, M.M.K., 2021. "Combustion chamber modifications to improve diesel engine performance and reduce emissions: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 152(C).
    8. Jemni, Mohamed Ali & Kantchev, Gueorgui & Abid, Mohamed Salah, 2011. "Influence of intake manifold design on in-cylinder flow and engine performances in a bus diesel engine converted to LPG gas fuelled, using CFD analyses and experimental investigations," Energy, Elsevier, vol. 36(5), pages 2701-2715.
    9. Hamedi, M.R. & Doustdar, O. & Tsolakis, A. & Hartland, J., 2019. "Thermal energy storage system for efficient diesel exhaust aftertreatment at low temperatures," Applied Energy, Elsevier, vol. 235(C), pages 874-887.
    10. Pastor, J.V. & Bermúdez, V. & García-Oliver, J.M. & Ramírez-Hernández, J.G., 2011. "Influence of spray-glow plug configuration on cold start combustion for high-speed direct injection diesel engines," Energy, Elsevier, vol. 36(9), pages 5486-5496.
    11. Yang, Jufeng & Cai, Yingfeng & Mi, Chris, 2022. "Lithium-ion battery capacity estimation based on battery surface temperature change under constant-current charge scenario," Energy, Elsevier, vol. 241(C).
    12. Shi, Xingyi & Li, Guangzhe & Zhang, Ruihan & Esan, Oladapo Christopher & Huo, Xiaoyu & Wu, Qixing & An, Liang, 2024. "Operation of rechargeable metal-ion batteries in low-temperature environments," Renewable and Sustainable Energy Reviews, Elsevier, vol. 189(PA).
    13. Liu, Teng & E, Jiaqiang & Yang, W.M. & Deng, Yuangwang & An, H. & Zhang, Zhiqing & Pham, Minhhieu, 2018. "Investigation on the applicability for reaction rates adjustment of the optimized biodiesel skeletal mechanism," Energy, Elsevier, vol. 150(C), pages 1031-1038.
    14. Qin, Yudi & Du, Jiuyu & Lu, Languang & Gao, Ming & Haase, Frank & Li, Jianqiu & Ouyang, Minggao, 2020. "A rapid lithium-ion battery heating method based on bidirectional pulsed current: Heating effect and impact on battery life," Applied Energy, Elsevier, vol. 280(C).
    15. E, Jiaqiang & Pham, MinhHieu & Deng, Yuanwang & Nguyen, Tuannghia & Duy, VinhNguyen & Le, DucHieu & Zuo, Wei & Peng, Qingguo & Zhang, Zhiqing, 2018. "Effects of injection timing and injection pressure on performance and exhaust emissions of a common rail diesel engine fueled by various concentrations of fish-oil biodiesel blends," Energy, Elsevier, vol. 149(C), pages 979-989.
    16. Ma, Ying & Wei, Rongrong & Zuo, Hongyan & Zuo, Qingsong & Luo, Xiaoyu & Chen, Ying & Wu, Shuying & Chen, Wei, 2024. "N-doped EG@MOFs derived porous carbon composite phase change materials for thermal optimization of Li-ion batteries at low temperature," Energy, Elsevier, vol. 286(C).
    17. Shi, Zhicheng & Lee, Chia-fon & Wu, Han & Wu, Yang & Zhang, Lu & Liu, Fushui, 2019. "Optical diagnostics of low-temperature ignition and combustion characteristics of diesel/kerosene blends under cold-start conditions," Applied Energy, Elsevier, vol. 251(C), pages 1-1.
    18. Song, Yue & Zhou, Yu & Zhao, Shuai & Du, Fa-rong & Li, Xue-yu & Zhu, Kun & Yan, Huan-song & Xu, Zheng & Ding, Shui-ting, 2024. "Cyclic coupling and working characteristics analysis of a novel combined cycle engine concept for aviation applications," Energy, Elsevier, vol. 301(C).
    19. Najjar, Yousef S.H., 2011. "Comparison of performance of a Greener direct-injection stratified-charge (DISC) engine with a spark-ignition engine using a simplified model," Energy, Elsevier, vol. 36(7), pages 4136-4143.
    20. Zhang, Zhiqing & Dong, Rui & Tan, Dongli & Duan, Lin & Jiang, Feng & Yao, Xiaoxue & Yang, Dixin & Hu, Jingyi & Zhang, Jian & Zhong, Weihuang & Zhao, Ziheng, 2023. "Effect of structural parameters on diesel particulate filter trapping performance of heavy-duty diesel engines based on grey correlation analysis," Energy, Elsevier, vol. 271(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:283:y:2023:i:c:s0360544223025161. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.