IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v278y2023ics0360544223011660.html
   My bibliography  Save this article

Performance enhancement of small-scale wind turbine featuring morphing blades

Author

Listed:
  • Akhter, Md Zishan
  • Ali, Ahmed Riyadh
  • Jawahar, Hasan Kamliya
  • Omar, Farag Khalifa
  • Elnajjar, Emad

Abstract

The demand for renewable energy is driven by the depletion and adverse environmental impacts of fossil fuels. There is a growing global consensus for research and development of renewable energy, including wind. In the current study, National Renewable Energy Laboratory (NREL) Phase VI wind turbine blade is integrated with morphing trailing-edge, installed on the aft-30% blade chord, across outboard 75% blade span. The morphing trailing-edge generates unique topology for each wind speed such that the glide ratio is maximized along the blade span. Three-dimensional transient computational fluid dynamics (CFD) analyses are conducted over low to medium wind speeds to investigate the blade aerodynamics. The analyses exhibit significant increments in the low-speed shaft torque and power of the morphed blades compared to the baseline. The integration of morphing trailing-edge high-lift flow control mechanism on the NREL Phase VI blade enhanced energy harvesting and reduced the wind turbine cut-in wind speed. Comparative investigations are also conducted to assess the improvements in thrust, bending moment, and aerodynamic load distribution, as well as alterations in the pressure, flow field, turbulence, surface flow, and wake. The aeroacoustics directivity of the wind turbines exhibits marginal far-field noise increment in case of morphing trailing-edge integrated blades.

Suggested Citation

  • Akhter, Md Zishan & Ali, Ahmed Riyadh & Jawahar, Hasan Kamliya & Omar, Farag Khalifa & Elnajjar, Emad, 2023. "Performance enhancement of small-scale wind turbine featuring morphing blades," Energy, Elsevier, vol. 278(C).
    • Handle: RePEc:eee:energy:v:278:y:2023:i:c:s0360544223011660
    DOI: 10.1016/j.energy.2023.127772
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544223011660
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2023.127772?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Tummala, Abhishiktha & Velamati, Ratna Kishore & Sinha, Dipankur Kumar & Indraja, V. & Krishna, V. Hari, 2016. "A review on small scale wind turbines," Renewable and Sustainable Energy Reviews, Elsevier, vol. 56(C), pages 1351-1371.
    2. Kamliya Jawahar, Hasan & Ai, Qing & Azarpeyvand, Mahdi, 2018. "Experimental and numerical investigation of aerodynamic performance for airfoils with morphed trailing edges," Renewable Energy, Elsevier, vol. 127(C), pages 355-367.
    3. Sedighi, Hamed & Akbarzadeh, Pooria & Salavatipour, Ali, 2020. "Aerodynamic performance enhancement of horizontal axis wind turbines by dimples on blades: Numerical investigation," Energy, Elsevier, vol. 195(C).
    4. Wang, Longjun & Alam, Md. Mahbub & Rehman, Shafiqur & Zhou, Yu, 2022. "Effects of blowing and suction jets on the aerodynamic performance of wind turbine airfoil," Renewable Energy, Elsevier, vol. 196(C), pages 52-64.
    5. Ye, Xuemin & Hu, Jiami & Zheng, Nan & Li, Chunxi, 2023. "Numerical study on aerodynamic performance and noise of wind turbine airfoils with serrated gurney flap," Energy, Elsevier, vol. 262(PB).
    6. Chamorro, Leonardo P. & Arndt, R.E.A. & Sotiropoulos, F., 2013. "Drag reduction of large wind turbine blades through riblets: Evaluation of riblet geometry and application strategies," Renewable Energy, Elsevier, vol. 50(C), pages 1095-1105.
    7. Lanzafame, R. & Mauro, S. & Messina, M., 2013. "Wind turbine CFD modeling using a correlation-based transitional model," Renewable Energy, Elsevier, vol. 52(C), pages 31-39.
    8. Simic, Zdenko & Havelka, Juraj George & Bozicevic Vrhovcak, Maja, 2013. "Small wind turbines – A unique segment of the wind power market," Renewable Energy, Elsevier, vol. 50(C), pages 1027-1036.
    9. Özkan, Musa & Erkan, Onur, 2022. "Control of a boundary layer over a wind turbine blade using distributed passive roughness," Renewable Energy, Elsevier, vol. 184(C), pages 421-429.
    10. Md Zishan Akhter & Farag Khalifa Omar, 2021. "Review of Flow-Control Devices for Wind-Turbine Performance Enhancement," Energies, MDPI, vol. 14(5), pages 1-35, February.
    11. Zaki, Abanoub & Abdelrahman, M.A. & Ayad, Samir S. & Abdellatif, O.E., 2022. "Effects of leading edge slat on the aerodynamic performance of low Reynolds number horizontal axis wind turbine," Energy, Elsevier, vol. 239(PD).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Wang, Longjun & Alam, Md. Mahbub & Rehman, Shafiqur & Zhou, Yu, 2022. "Effects of blowing and suction jets on the aerodynamic performance of wind turbine airfoil," Renewable Energy, Elsevier, vol. 196(C), pages 52-64.
    2. Murthy, K.S.R. & Rahi, O.P., 2017. "A comprehensive review of wind resource assessment," Renewable and Sustainable Energy Reviews, Elsevier, vol. 72(C), pages 1320-1342.
    3. Thé, Jesse & Yu, Hesheng, 2017. "A critical review on the simulations of wind turbine aerodynamics focusing on hybrid RANS-LES methods," Energy, Elsevier, vol. 138(C), pages 257-289.
    4. Shafiqur Rehman & Md. Mahbub Alam & Luai M. Alhems & M. Mujahid Rafique, 2018. "Horizontal Axis Wind Turbine Blade Design Methodologies for Efficiency Enhancement—A Review," Energies, MDPI, vol. 11(3), pages 1-34, February.
    5. Sun, Yukun & Qian, Yaoru & Gao, Yang & Wang, Tongguang & Wang, Long, 2024. "Stall control on the wind turbine airfoil via the single and dual-channel of combining bowing and suction technique," Energy, Elsevier, vol. 290(C).
    6. Koca, Kemal & Genç, Mustafa Serdar & Ertürk, Sevde, 2022. "Impact of local flexible membrane on power efficiency stability at wind turbine blade," Renewable Energy, Elsevier, vol. 197(C), pages 1163-1173.
    7. Azlan, F. & Tan, M.K. & Tan, B.T. & Ismadi, M.-Z., 2023. "Passive flow-field control using dimples for performance enhancement of horizontal axis wind turbine," Energy, Elsevier, vol. 271(C).
    8. Kumar, Rakesh & Raahemifar, Kaamran & Fung, Alan S., 2018. "A critical review of vertical axis wind turbines for urban applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 89(C), pages 281-291.
    9. Koca, Kemal & Genç, Mustafa Serdar & Bayır, Esra & Soğuksu, Fatma Kezban, 2022. "Experimental study of the wind turbine airfoil with the local flexibility at different locations for more energy output," Energy, Elsevier, vol. 239(PA).
    10. Mauro, S. & Lanzafame, R. & Messina, M. & Brusca, S., 2023. "On the importance of the root-to-hub adapter effects on HAWT performance: A CFD-BEM numerical investigation," Energy, Elsevier, vol. 275(C).
    11. Rocha, P. A. Costa & Rocha, H. H. Barbosa & Carneiro, F. O. Moura & da Silva, M. E. Vieira & de Andrade, C. Freitas, 2016. "A case study on the calibration of the k–ω SST (shear stress transport) turbulence model for small scale wind turbines designed with cambered and symmetrical airfoils," Energy, Elsevier, vol. 97(C), pages 144-150.
    12. Rocha, P.A. Costa & Carneiro de Araujo, J.W. & Lima, R.J. Pontes & Vieira da Silva, M.E. & Albiero, D. & de Andrade, C.F. & Carneiro, F.O.M., 2018. "The effects of blade pitch angle on the performance of small-scale wind turbine in urban environments," Energy, Elsevier, vol. 148(C), pages 169-178.
    13. Jinghua Lin & You-Lin Xu & Yong Xia & Chao Li, 2019. "Structural Analysis of Large-Scale Vertical-Axis Wind Turbines, Part I: Wind Load Simulation," Energies, MDPI, vol. 12(13), pages 1-31, July.
    14. Tania García-Sánchez & Arbinda Kumar Mishra & Elías Hurtado-Pérez & Rubén Puché-Panadero & Ana Fernández-Guillamón, 2020. "A Controller for Optimum Electrical Power Extraction from a Small Grid-Interconnected Wind Turbine," Energies, MDPI, vol. 13(21), pages 1-16, November.
    15. Zhong, Junwei & Li, Jingyin & Liu, Huizhong, 2023. "Dynamic mode decomposition analysis of flow separation control on wind turbine airfoil using leading−edge rod," Energy, Elsevier, vol. 268(C).
    16. Reinauer, Tobias & Hansen, Ulrich Elmer, 2021. "Determinants of adoption in open-source hardware: A review of small wind turbines," Technovation, Elsevier, vol. 106(C).
    17. Khaoula Qaissi & Omer Elsayed & Mustapha Faqir & Elhachmi Essadiqi, 2023. "Aerodynamic Optimization of Trailing-Edge-Serrations for a Wind Turbine Blade Using Taguchi Modified Additive Model," Energies, MDPI, vol. 16(3), pages 1-21, January.
    18. Xiao, Han & Liu, Zhenwei & Zhang, Ran & Kelham, Andrew & Xu, Xiangyang & Wang, Xu, 2021. "Study of a novel rotational speed amplified dual turbine wheel wave energy converter," Applied Energy, Elsevier, vol. 301(C).
    19. Ismail Kamdar & Shahid Ali & Juntakan Taweekun & Hafiz Muhammad Ali, 2021. "Wind Farm Site Selection Using WAsP Tool for Application in the Tropical Region," Sustainability, MDPI, vol. 13(24), pages 1-25, December.
    20. Tavakol Aghaei, Vahid & Ağababaoğlu, Arda & Bawo, Biram & Naseradinmousavi, Peiman & Yıldırım, Sinan & Yeşilyurt, Serhat & Onat, Ahmet, 2023. "Energy optimization of wind turbines via a neural control policy based on reinforcement learning Markov chain Monte Carlo algorithm," Applied Energy, Elsevier, vol. 341(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:278:y:2023:i:c:s0360544223011660. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.