IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v264y2023ics0360544222031292.html
   My bibliography  Save this article

Development of cathode ordered membrane electrode assembly based on TiO2 nanowire array and ultrasonic spraying

Author

Listed:
  • Xuan, Lingfeng
  • Wang, Yancheng
  • Lan, Jinwei
  • Tao, Kai
  • Zhou, Caiying
  • Mei, Deqing

Abstract

Membrane electrode assembly (MEA) is the core component of proton exchange membrane fuel cells (PEMFCs). The multi-phase channels inside the catalyst layer of the MEA are generally messy, thus leading to inefficient mass transfer characteristics. Meanwhile, the corrosion of carbon carriers and agglomeration of catalyst will aggravate the performance degradation and reduce its service life. This study presented an MEA with cathode ordered catalyst layer to improve the mass transfer characteristics and durability. The TiO2 nanowire arrays were prepared on the porous surface of carbon paper by seed-assisted hydrothermal reaction, the catalyst was applied on the surfaces of TiO2 carrier and PEM uniformly by ultrasonic spraying. The microstructure characterization and electrochemical tests were conducted, and the results showed that the peak power of the cathode ordered MEA (CO-MEA) can reach 539.5 mW/cm2 at a platinum loading of 0.21 mg/cm2. Furthermore, the MEA with ordered cathode catalyst layer can maintain a higher output voltage under high current density, indicating that the MEA's internal three-phase reaction channels have been significantly improved. Finally, by comparing with the other processes, it was found that the combination of ultrasonic spraying and cathode ordered structures would be a promising solution for developing efficient and stable MEA.

Suggested Citation

  • Xuan, Lingfeng & Wang, Yancheng & Lan, Jinwei & Tao, Kai & Zhou, Caiying & Mei, Deqing, 2023. "Development of cathode ordered membrane electrode assembly based on TiO2 nanowire array and ultrasonic spraying," Energy, Elsevier, vol. 264(C).
    • Handle: RePEc:eee:energy:v:264:y:2023:i:c:s0360544222031292
    DOI: 10.1016/j.energy.2022.126243
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544222031292
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2022.126243?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Esmaeilifar, A. & Rowshanzamir, S. & Eikani, M.H. & Ghazanfari, E., 2010. "Synthesis methods of low-Pt-loading electrocatalysts for proton exchange membrane fuel cell systems," Energy, Elsevier, vol. 35(9), pages 3941-3957.
    2. Kui Jiao & Jin Xuan & Qing Du & Zhiming Bao & Biao Xie & Bowen Wang & Yan Zhao & Linhao Fan & Huizhi Wang & Zhongjun Hou & Sen Huo & Nigel P. Brandon & Yan Yin & Michael D. Guiver, 2021. "Designing the next generation of proton-exchange membrane fuel cells," Nature, Nature, vol. 595(7867), pages 361-369, July.
    3. Kwon, Obeen & Kim, Jaeyeon & Choi, Heesoo & Cha, Hyeonjin & Shin, Myunggyu & Jeong, Youngjin & Park, Taehyun, 2022. "CNT sheet as a cathodic functional interlayer in polymer electrolyte membrane fuel cells," Energy, Elsevier, vol. 245(C).
    4. Seferlis, Panos & Varbanov, Petar Sabev & Papadopoulos, Athanasios I. & Chin, Hon Huin & Klemeš, Jiří Jaromír, 2021. "Sustainable design, integration, and operation for energy high-performance process systems," Energy, Elsevier, vol. 224(C).
    5. Mark K. Debe, 2012. "Electrocatalyst approaches and challenges for automotive fuel cells," Nature, Nature, vol. 486(7401), pages 43-51, June.
    6. Liu, Shengchu & Hua, Shiyang & Lin, Rui & Wang, Hong & Cai, Xin & Ji, Weichen, 2022. "Improving the performance and durability of low Pt-loaded MEAs by adjusting the distribution positions of Pt particles in cathode catalyst layer," Energy, Elsevier, vol. 253(C).
    7. Pei, Pucheng & Jia, Xiaoning & Xu, Huachi & Li, Pengcheng & Wu, Ziyao & Li, Yuehua & Ren, Peng & Chen, Dongfang & Huang, Shangwei, 2018. "The recovery mechanism of proton exchange membrane fuel cell in micro-current operation," Applied Energy, Elsevier, vol. 226(C), pages 1-9.
    8. Majlan, E.H. & Rohendi, D. & Daud, W.R.W. & Husaini, T. & Haque, M.A., 2018. "Electrode for proton exchange membrane fuel cells: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 89(C), pages 117-134.
    9. Olabi, A.G. & Wilberforce, Tabbi & Abdelkareem, Mohammad Ali, 2021. "Fuel cell application in the automotive industry and future perspective," Energy, Elsevier, vol. 214(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Yang, Yue & Yuan, Songmei & Liu, Jieyuan & Zhang, Zikang & Lu, Tie, 2024. "Effect of catalyst ink particle size on the structure of the catalyst layer and electrical performance in the process of ultrasonic spray manufacturing PEMFCs," Energy, Elsevier, vol. 294(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Li, Yanju & Li, Dongxu & Ma, Zheshu & Zheng, Meng & Lu, Zhanghao & Song, Hanlin & Guo, Xinjia & Shao, Wei, 2022. "Performance analysis and optimization of a novel vehicular power system based on HT-PEMFC integrated methanol steam reforming and ORC," Energy, Elsevier, vol. 257(C).
    2. Zhang, Xiaoqing & Yang, Jiapei & Ma, Xiao & Zhuge, Weilin & Shuai, Shijin, 2022. "Modelling and analysis on effects of penetration of microporous layer into gas diffusion layer in PEM fuel cells: Focusing on mass transport," Energy, Elsevier, vol. 254(PA).
    3. Zheng Huang & Laisuo Su & Yunjie Yang & Linsong Gao & Xinyu Liu & Heng Huang & Yubai Li & Yongchen Song, 2023. "Three-Dimensional Simulation on the Effects of Different Parameters and Pt Loading on the Long-Term Performance of Proton Exchange Membrane Fuel Cells," Sustainability, MDPI, vol. 15(4), pages 1-22, February.
    4. Venkatesan, Suriya & Mitzel, Jens & Wegner, Karsten & Costa, Remi & Gazdzicki, Pawel & Friedrich, Kaspar Andreas, 2022. "Nanomaterials and films for polymer electrolyte membrane fuel cells and solid oxide cells by flame spray pyrolysis," Renewable and Sustainable Energy Reviews, Elsevier, vol. 158(C).
    5. Yang, Yue & Yuan, Songmei & Liu, Jieyuan & Zhang, Zikang & Lu, Tie, 2024. "Effect of catalyst ink particle size on the structure of the catalyst layer and electrical performance in the process of ultrasonic spray manufacturing PEMFCs," Energy, Elsevier, vol. 294(C).
    6. Li, Xiang & Tang, Fumin & Wang, Qianqian & Li, Bing & Dai, Haifeng & Chang, Guofeng & Zhang, Cunman & Ming, Pingwen, 2023. "Effect of cathode catalyst layer on proton exchange membrane fuel cell performance: Considering the spatially variable distribution," Renewable Energy, Elsevier, vol. 212(C), pages 644-654.
    7. Yuzhen Xia & Hangwei Lei & Xiaojun Wu & Guilin Hu & Hao Pan & Baizeng Fang, 2023. "Design of New Test System for Proton Exchange Membrane Fuel Cell," Energies, MDPI, vol. 16(2), pages 1-11, January.
    8. Kwon, Obeen & Kim, Jaeyeon & Choi, Heesoo & Cha, Hyeonjin & Shin, Myunggyu & Jeong, Youngjin & Park, Taehyun, 2022. "CNT sheet as a cathodic functional interlayer in polymer electrolyte membrane fuel cells," Energy, Elsevier, vol. 245(C).
    9. Chou, Chang-Chen & Liu, Cheng-Hong & Chen, Bing-Hung, 2014. "Effects of reduction temperature and pH value of polyol process on reduced graphene oxide supported Pt electrocatalysts for oxygen reduction reaction," Energy, Elsevier, vol. 70(C), pages 231-238.
    10. Luo, Zongkai & Chen, Ke & Zou, Guofu & Deng, Qihao & He, Dandi & Xiong, Zhongzhuang & Chen, Wenshang & Chen, Ben, 2024. "Dynamic response characteristics and water-gas-heat synergistic transport mechanism of proton exchange membrane fuel cell during transient loading," Energy, Elsevier, vol. 302(C).
    11. Mengnan Wang & Jiaguang Zhang & Silvia Favero & Luke J. R. Higgins & Hui Luo & Ifan E. L. Stephens & Maria-Magdalena Titirici, 2024. "Resolving optimal ionomer interaction in fuel cell electrodes via operando X-ray absorption spectroscopy," Nature Communications, Nature, vol. 15(1), pages 1-11, December.
    12. Asadi, Mohammad Reza & Ghasabehi, Mehrdad & Ghanbari, Sina & Shams, Mehrzad, 2024. "The optimization of an innovative interdigitated flow field proton exchange membrane fuel cell by using artificial intelligence," Energy, Elsevier, vol. 290(C).
    13. Bhuvanendran, Narayanamoorthy & Ravichandran, Sabarinathan & Jayaseelan, Santhana Sivabalan & Xu, Qian & Khotseng, Lindiwe & Su, Huaneng, 2020. "Improved bi-functional oxygen electrocatalytic performance of Pt–Ir alloy nanoparticles embedded on MWCNT with Pt-enriched surfaces," Energy, Elsevier, vol. 211(C).
    14. Yang, Fan & Li, Yuehua & Chen, Dongfang & Hu, Song & Xu, Xiaoming, 2024. "Parameter identification of PEMFC steady-state model based on p-dimensional extremum seeking via simplex tuning optimization method," Energy, Elsevier, vol. 292(C).
    15. Kermani, M.J. & Moein-Jahromi, M. & Hasheminasab, M.R. & Ebrahimi, F. & Wei, L. & Guo, J. & Jiang, F.M., 2022. "Application of a foam-based functionally graded porous material flow-distributor to PEM fuel cells," Energy, Elsevier, vol. 254(PB).
    16. Chu, Tiankuo & Wang, Qinpu & Xie, Meng & Wang, Baoyun & Yang, Daijun & Li, Bing & Ming, Pingwen & Zhang, Cunman, 2022. "Investigation of the reversible performance degradation mechanism of the PEMFC stack during long-term durability test," Energy, Elsevier, vol. 258(C).
    17. Chu, Tiankuo & Xie, Meng & Yu, Yue & Wang, Baoyun & Yang, Daijun & Li, Bing & Ming, Pingwen & Zhang, Cunman, 2022. "Experimental study of the influence of dynamic load cycle and operating parameters on the durability of PEMFC," Energy, Elsevier, vol. 239(PD).
    18. Migo-Sumagang, Maria Victoria & Tan, Raymond R. & Aviso, Kathleen B., 2023. "A multi-period model for optimizing negative emission technology portfolios with economic and carbon value discount rates," Energy, Elsevier, vol. 275(C).
    19. Zhang, Yong & He, Shirong & Jiang, Xiaohui & Xiong, Mu & Ye, Yuntao & Yang, Xi, 2023. "Three-dimensional multi-phase simulation of proton exchange membrane fuel cell performance considering constriction straight channel," Energy, Elsevier, vol. 267(C).
    20. Lin, Rui & Zhong, Di & Lan, Shunbo & Guo, Rong & Ma, Yunyang & Cai, Xin, 2021. "Experimental validation for enhancement of PEMFC cold start performance: Based on the optimization of micro porous layer," Applied Energy, Elsevier, vol. 300(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:264:y:2023:i:c:s0360544222031292. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.