IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v254y2022ipas036054422201088x.html
   My bibliography  Save this article

Experimental investigation to optimize nozzle geometry and compression ratio along with injection pressure on single cylinder DI diesel engine operated with AOME biodiesel

Author

Listed:
  • Patil, Basavaras B.
  • Topannavar, S.N.
  • Akkoli, K.M.
  • Shivashimpi, M.M.
  • Kattimani, Sunilkumar S.

Abstract

With the increase in population, energy demand is more in the automotive sector. Soaring prices and extinction of fossil fuels are reasons why researchers are focusing more on alternatives. This research work carried out on a single-cylinder DI diesel engine running on AOME biodiesel aims to optimize the nozzle geometry, the compression ratio and the injection pressure. The experiment on transesterified AOME biodiesel/diesel blends B80D20, B60D40, B40D60, and B20D80 was evaluated against pure diesel. 4 and 3 hole fuel injectors of 0.25 mm and 0.20 mm diameter respectively are used in the experimental study with 240 and 260 bar IOP at compression ratios 16.5:1 and 17.5:1 for optimization. The results of the experimental investigations prove that for biodiesel blends, the brake thermal efficiency is slightly lower and the smoke emissions are reduced compared to diesel. In addition, the results prove that at 260 bar IOP, the 4 hole, 0.25 mm diameter fuel injector at a compression ratio of 17.5:1, the B40D60 blend gives improved results against all blends in case of brake thermal efficiency and smoke emissions. Finally, these are the most efficient and optimized conditions for the biodiesel blend by improving brake thermal efficiency (25.43%) and reducing smoke emissions (53HSU).

Suggested Citation

  • Patil, Basavaras B. & Topannavar, S.N. & Akkoli, K.M. & Shivashimpi, M.M. & Kattimani, Sunilkumar S., 2022. "Experimental investigation to optimize nozzle geometry and compression ratio along with injection pressure on single cylinder DI diesel engine operated with AOME biodiesel," Energy, Elsevier, vol. 254(PA).
    • Handle: RePEc:eee:energy:v:254:y:2022:i:pa:s036054422201088x
    DOI: 10.1016/j.energy.2022.124185
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S036054422201088X
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2022.124185?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. K. M. Akkoli & N. R. Banapurmath & Suresh G & Manzoore Elahi M. Soudagar & T. M. Yunus Khan & Maughal Ahmed Ali Baig & M. A. Mujtaba & Nazia Hossain & Kiran Shahapurkar & Ashraf Elfasakhany & Mishal A, 2021. "Effect of Producer Gas from Redgram Stalk and Combustion Chamber Types on the Emission and Performance Characteristics of Diesel Engine," Energies, MDPI, vol. 14(18), pages 1-17, September.
    2. Piloto-Rodríguez, Ramón & Sánchez-Borroto, Yisel & Melo-Espinosa, Eliezer Ahmed & Verhelst, Sebastian, 2017. "Assessment of diesel engine performance when fueled with biodiesel from algae and microalgae: An overview," Renewable and Sustainable Energy Reviews, Elsevier, vol. 69(C), pages 833-842.
    3. Ağbulut, Ümit & Sarıdemir, Suat & Rajak, Upendra & Polat, Fikret & Afzal, Asif & Verma, Tikendra Nath, 2021. "Effects of high-dosage copper oxide nanoparticles addition in diesel fuel on engine characteristics," Energy, Elsevier, vol. 229(C).
    4. Qiu, Yi & Cheng, Jun & Guo, Hao & Zhang, Ze & Yang, Weijuan & Cen, Kefa, 2019. "Mild hydrothermal treatment on microalgal biomass in batch reactors for lipids hydrolysis and solvent-free extraction to produce biodiesel," Energy, Elsevier, vol. 189(C).
    5. Agarwal, Avinash Kumar & Singh, Akhilendra Pratap & Agarwal, Anuj & Jeon, Joonho & Lee, Chang Sik & Park, Sungwook, 2016. "Spatial combustion analysis of biodiesel fueled engine using combustion chamber endoscopy and modeling," Renewable Energy, Elsevier, vol. 98(C), pages 292-303.
    6. Yaliwal, V.S. & Banapurmath, N.R. & Gireesh, N.M. & Hosmath, R.S. & Donateo, Teresa & Tewari, P.G., 2016. "Effect of nozzle and combustion chamber geometry on the performance of a diesel engine operated on dual fuel mode using renewable fuels," Renewable Energy, Elsevier, vol. 93(C), pages 483-501.
    7. Kattimani, Sunilkumar S. & Topannavar, S.N. & Shivashimpi, M.M. & Dodamani, B.M., 2020. "Experimental investigation to optimize fuel injection strategies and compression ratio on single cylinder DI diesel engine operated with FOME biodiesel," Energy, Elsevier, vol. 200(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Rajak, Upendra & Ağbulut, Ümit & Dasore, Abhishek & Verma, Tikendra Nath, 2024. "Artificial intelligence based-prediction of energy efficiency and tailpipe emissions of soybean methyl ester fuelled CI engine under variable compression ratios," Energy, Elsevier, vol. 294(C).
    2. Mustafa Kemal Balki, 2024. "Determination of Optimum Operating Parameters in a Non-Road Diesel Engine Fueled with 1-Heptanol/Biodiesel at Different Injection Pressures and Advances," Energies, MDPI, vol. 17(7), pages 1-15, March.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Fiore, M. & Magi, V. & Viggiano, A., 2020. "Internal combustion engines powered by syngas: A review," Applied Energy, Elsevier, vol. 276(C).
    2. M'Arimi, M.M. & Mecha, C.A. & Kiprop, A.K. & Ramkat, R., 2020. "Recent trends in applications of advanced oxidation processes (AOPs) in bioenergy production: Review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 121(C).
    3. EL-Seesy, Ahmed I. & Hassan, Hamdy, 2019. "Investigation of the effect of adding graphene oxide, graphene nanoplatelet, and multiwalled carbon nanotube additives with n-butanol-Jatropha methyl ester on a diesel engine performance," Renewable Energy, Elsevier, vol. 132(C), pages 558-574.
    4. Goel, Varun & Kumar, Naresh & Singh, Paramvir, 2018. "Impact of modified parameters on diesel engine characteristics using biodiesel: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 2716-2729.
    5. Severo, Ihana Aguiar & Siqueira, Stefania Fortes & Deprá, Mariany Costa & Maroneze, Mariana Manzoni & Zepka, Leila Queiroz & Jacob-Lopes, Eduardo, 2019. "Biodiesel facilities: What can we address to make biorefineries commercially competitive?," Renewable and Sustainable Energy Reviews, Elsevier, vol. 112(C), pages 686-705.
    6. Soudagar, Manzoore Elahi M. & Mujtaba, M.A. & Safaei, Mohammad Reza & Afzal, Asif & V, Dhana Raju & Ahmed, Waqar & Banapurmath, N.R. & Hossain, Nazia & Bashir, Shahid & Badruddin, Irfan Anjum & Goodar, 2021. "Effect of Sr@ZnO nanoparticles and Ricinus communis biodiesel-diesel fuel blends on modified CRDI diesel engine characteristics," Energy, Elsevier, vol. 215(PA).
    7. Raslavičius, Laurencas & Felneris, Mantas & Pukalskas, Saugirdas & Rimkus, Alfredas & Melaika, Mindaugas, 2019. "Evaluation of P. moriformis oil and its blends with diesel fuel as promising contributors to transportation energy," Energy, Elsevier, vol. 189(C).
    8. Dong, Shijun & Wang, Zhaowen & Yang, Can & Ou, Biao & Lu, Hongguang & Xu, Haocheng & Cheng, Xiaobei, 2018. "Investigations on the effects of fuel stratification on auto-ignition and combustion process of an ethanol/diesel dual-fuel engine," Applied Energy, Elsevier, vol. 230(C), pages 19-30.
    9. Fayad, Mohammed A. & Tsolakis, Athanasios & Martos, Francisco J., 2020. "Influence of alternative fuels on combustion and characteristics of particulate matter morphology in a compression ignition diesel engine," Renewable Energy, Elsevier, vol. 149(C), pages 962-969.
    10. K. M. V. Ravi Teja & P. Issac Prasad & K. Vijaya Kumar Reddy & Nagaraj R. Banapurmath & Muhammad A. Kalam & C. Ahamed Saleel, 2022. "Effect of Injection Parameters on the Performance of Compression Ignition Engine Powered with Jamun Seed and Cashew Nutshell B20 Biodiesel Blends," Sustainability, MDPI, vol. 14(8), pages 1-18, April.
    11. Zhang-Chun Tang & Yanjun Xia & Qi Xue & Jie Liu, 2018. "A Non-Probabilistic Solution for Uncertainty and Sensitivity Analysis on Techno-Economic Assessments of Biodiesel Production with Interval Uncertainties," Energies, MDPI, vol. 11(3), pages 1-17, March.
    12. Ağbulut, Ümit & Elibol, Erdem & Demirci, Tuna & Sarıdemir, Suat & Gürel, Ali Etem & Rajak, Upendra & Afzal, Asif & Verma, Tikendra Nath, 2022. "Synthesis of graphene oxide nanoparticles and the influences of their usage as fuel additives on CI engine behaviors," Energy, Elsevier, vol. 244(PA).
    13. Sheriff, S. Abdul & Kumar, Indrala Kishan & Mandhatha, Petluri Sai & Jambal, Samraj Sunder & Sellappan, Raja & Ashok, B. & Nanthagopal, K., 2020. "Emission reduction in CI engine using biofuel reformulation strategies through nano additives for atmospheric air quality improvement," Renewable Energy, Elsevier, vol. 147(P1), pages 2295-2308.
    14. de la Garza, Oscar A. & Martínez-Martínez, S. & Avulapati, Madan Mohan & Pos, Radboud & Megaritis, Thanos & Ganippa, Lionel, 2021. "Biofuels and its spray interactions under pilot-main injection strategy," Energy, Elsevier, vol. 219(C).
    15. Mohan, Revu Krishn & Sarojini, Jajimoggala & Rajak, Upendra & Verma, Tikendra Nath & Ağbulut, Ümit, 2023. "Alternative fuel production from waste plastics and their usability in light duty diesel engine: Combustion, energy, and environmental analysis," Energy, Elsevier, vol. 265(C).
    16. Krishnamoorthy Ramalingam & Elumalai Perumal Venkatesan & Abdul Aabid & Muneer Baig, 2022. "Assessment of CI Engine Performance and Exhaust Air Quality Outfitted with Real-Time Emulsion Fuel Injection System," Sustainability, MDPI, vol. 14(9), pages 1-19, April.
    17. Hyun Min Baek & Hyung Min Lee, 2022. "Spray Behavior, Combustion, and Emission Characteristics of Jet Propellant-5 and Biodiesel Fuels with Multiple Split Injection Strategies," Energies, MDPI, vol. 15(7), pages 1-19, March.
    18. Khayum, Naseem & Anbarasu, S. & Murugan, S., 2021. "Optimization of fuel injection parameters and compression ratio of a biogas fueled diesel engine using methyl esters of waste cooking oil as a pilot fuel," Energy, Elsevier, vol. 221(C).
    19. Saravanan, S. & Kaliyanasunder, R. & Rajesh Kumar, B. & Lakshmi Narayana Rao, G., 2020. "Effect of design parameters on performance and emissions of a CI engine operated with diesel-biodiesel- higher alcohol blends," Renewable Energy, Elsevier, vol. 148(C), pages 425-436.
    20. K. M. Akkoli & S. C. Kamate & S. N. Topannavar & A. R. Bhavimani & N. R. Banapurmath & Ibham Veza & Manzoore Elahi M. Soudagar & T. M. Yunus Khan & A. S. El-Shafay & M. A. Kalam & M. M. Shivashimpi & , 2022. "Influence of Injection Pressure and Aluminium Oxide Nano Particle-Added Fish Oil Methyl Ester on the Performance and Emission of Compression Ignition Engine," Energies, MDPI, vol. 15(24), pages 1-27, December.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:254:y:2022:i:pa:s036054422201088x. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.