IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v250y2022ics0360544222006065.html
   My bibliography  Save this article

Stochastic bi-objective optimization for closed wet cooling tower systems based on a simplified analytical model

Author

Listed:
  • Wu, Zhiyong
  • Lu, Zhibin
  • Zhang, Bingjian
  • He, Chang
  • Chen, Qinglin
  • Yu, Haoshui
  • Ren, Jingzheng

Abstract

A fast and accurate representation of the complex heat and mass transfer processes of closed-wet cooling tower (CWCT) systems for optimal design and management is challenging, especially considering the impact of weather variability. This study develops a systematic approach for the stochastic bi-objective optimization of CWCT systems based on a simplified analytical model. The analytical model is constructed by using the effectiveness-number of transfer unit method, which is embedded in a stochastic non-linear programming model for optimizing two competing objectives, namely the specific area and the coefficient of performance. A decomposition strategy is proposed to convert the original problem into multiple bi-objective optimization sub-problems by sequentially discretizing the design and uncertain spaces. Each bi-objective optimization sub-problem is solved using an augmented e-constraint method. The resulting solutions are finally processed by an efficient multi-criteria decision-making method, namely the Technique for Order Preference by Similarity to Ideal Solution to select the preferred Pareto solution. From an illustrative case study, it is found that the stochastic approach outperforms the deterministic approach since it allows for a certain design margin of heat exchanger area to reduce the impact of the variability in weather and to avoid the risks of abnormal running cases.

Suggested Citation

  • Wu, Zhiyong & Lu, Zhibin & Zhang, Bingjian & He, Chang & Chen, Qinglin & Yu, Haoshui & Ren, Jingzheng, 2022. "Stochastic bi-objective optimization for closed wet cooling tower systems based on a simplified analytical model," Energy, Elsevier, vol. 250(C).
    • Handle: RePEc:eee:energy:v:250:y:2022:i:c:s0360544222006065
    DOI: 10.1016/j.energy.2022.123703
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544222006065
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2022.123703?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Stabat, Pascal & Marchio, Dominique, 2004. "Simplified model for indirect-contact evaporative cooling-tower behaviour," Applied Energy, Elsevier, vol. 78(4), pages 433-451, August.
    2. Javadpour, Reza & Zeinali Heris, Saeed & Mohammadfam, Yaghoub, 2021. "Optimizing the effect of concentration and flow rate of water/ MWCNTs nanofluid on the performance of a forced draft cross-flow cooling tower," Energy, Elsevier, vol. 217(C).
    3. Mavrotas, George & Florios, Kostas, 2013. "An improved version of the augmented epsilon-constraint method (AUGMECON2) for finding the exact Pareto set in Multi-Objective Integer Programming problems," MPRA Paper 105034, University Library of Munich, Germany.
    4. Zheng, Bin & Guo, Chunmei & Chen, Tong & Shi, Qi & Lv, Jian & You, Yuwen, 2019. "Development of an experimental validated model of cross-flow indirect evaporative cooler with condensation," Applied Energy, Elsevier, vol. 252(C), pages 1-1.
    5. Yu, J.H. & Qu, Z.G. & Zhang, J.F. & Hu, S.J. & Guan, J., 2022. "Comprehensive coupling model of counter-flow wet cooling tower and its thermal performance analysis," Energy, Elsevier, vol. 238(PB).
    6. Salazar, Juan M. & Diwekar, Urmila & Constantinescu, Emil & Zavala, Victor M., 2013. "Stochastic optimization approach to water management in cooling-constrained power plants," Applied Energy, Elsevier, vol. 112(C), pages 12-22.
    7. Qi, Xiaoni & Liu, Yongqi & Guo, Qianjian & Yu, Jie & Yu, Shanshan, 2016. "Performance prediction of seawater shower cooling towers," Energy, Elsevier, vol. 97(C), pages 435-443.
    8. Cui, Haijiao & Li, Nianping & Peng, Jinqing & Cheng, Jianlin & Li, Shengbing, 2016. "Study on the dynamic and thermal performances of a reversibly used cooling tower with upward spraying," Energy, Elsevier, vol. 96(C), pages 268-277.
    9. Ayoub, Ali & Gjorgiev, Blaže & Sansavini, Giovanni, 2018. "Cooling towers performance in a changing climate: Techno-economic modeling and design optimization," Energy, Elsevier, vol. 160(C), pages 1133-1143.
    10. Xiaoqing Wei & Nianping Li & Jinqing Peng & Jianlin Cheng & Jinhua Hu & Meng Wang, 2017. "Performance Analyses of Counter-Flow Closed Wet Cooling Towers Based on a Simplified Calculation Method," Energies, MDPI, vol. 10(3), pages 1-15, February.
    11. Jouhara, Hussam & Almahmoud, Sulaiman & Brough, Daniel & Guichet, Valentin & Delpech, Bertrand & Chauhan, Amisha & Ahmad, Lujean & Serey, Nicolas, 2021. "Experimental and theoretical investigation of the performance of an air to water multi-pass heat pipe-based heat exchanger," Energy, Elsevier, vol. 219(C).
    12. Khamis Mansour, M. & Hassab, M.A., 2014. "Innovative correlation for calculating thermal performance of counterflow wet-cooling tower," Energy, Elsevier, vol. 74(C), pages 855-862.
    13. Wang, Lingbao & Bu, Xianbiao & Li, Huashan, 2020. "Multi-objective optimization and off-design evaluation of organic rankine cycle (ORC) for low-grade waste heat recovery," Energy, Elsevier, vol. 203(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Liu, Hua & Wu, Zhiyong & Zhang, Bingjian & Chen, Qinglin & Pan, Ming & Ren, Jingzheng & He, Chang, 2023. "A large-scale stochastic simulation-based thermodynamic optimization for the hybrid closed circuit cooling tower system with parallel computing," Energy, Elsevier, vol. 283(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Xiaoqing Wei & Nianping Li & Jinqing Peng & Jianlin Cheng & Jinhua Hu & Meng Wang, 2017. "Modeling and Optimization of a CoolingTower-Assisted Heat Pump System," Energies, MDPI, vol. 10(5), pages 1-18, May.
    2. Cui, Haijiao & Li, Nianping & Peng, Jinqing & Cheng, Jianlin & Li, Shengbing, 2016. "Study on the dynamic and thermal performances of a reversibly used cooling tower with upward spraying," Energy, Elsevier, vol. 96(C), pages 268-277.
    3. Javadpour, Reza & Zeinali Heris, Saeed & Mohammadfam, Yaghoub, 2021. "Optimizing the effect of concentration and flow rate of water/ MWCNTs nanofluid on the performance of a forced draft cross-flow cooling tower," Energy, Elsevier, vol. 217(C).
    4. Xiaoqing Wei & Nianping Li & Jinqing Peng & Jianlin Cheng & Jinhua Hu & Meng Wang, 2017. "Performance Analyses of Counter-Flow Closed Wet Cooling Towers Based on a Simplified Calculation Method," Energies, MDPI, vol. 10(3), pages 1-15, February.
    5. Cui, Haijiao & Li, Nianping & Wang, Xinlei & Peng, Jinqing & Li, Yuan & Wu, Zhibin, 2017. "Optimization of reversibly used cooling tower with downward spraying," Energy, Elsevier, vol. 127(C), pages 30-43.
    6. Guerras, Lidia S. & Martín, Mariano, 2020. "On the water footprint in power production: Sustainable design of wet cooling towers," Applied Energy, Elsevier, vol. 263(C).
    7. Panos Xidonas & Haris Doukas & George Mavrotas & Olena Pechak, 2016. "Environmental corporate responsibility for investments evaluation: an alternative multi-objective programming model," Annals of Operations Research, Springer, vol. 247(2), pages 395-413, December.
    8. Ayoub, Ali & Gjorgiev, Blaže & Sansavini, Giovanni, 2018. "Cooling towers performance in a changing climate: Techno-economic modeling and design optimization," Energy, Elsevier, vol. 160(C), pages 1133-1143.
    9. Satya Tamby & Daniel Vanderpooten, 2021. "Enumeration of the Nondominated Set of Multiobjective Discrete Optimization Problems," INFORMS Journal on Computing, INFORMS, vol. 33(1), pages 72-85, January.
    10. H. Khorshidian & M. Akbarpour Shirazi & S. M. T. Fatemi Ghomi, 2019. "An intelligent truck scheduling and transportation planning optimization model for product portfolio in a cross-dock," Journal of Intelligent Manufacturing, Springer, vol. 30(1), pages 163-184, January.
    11. Edris Yousefi Rad & Mohammad Reza Mahpeykar, 2017. "A Novel Hybrid Approach for Numerical Modeling of the Nucleating Flow in Laval Nozzle and Transonic Steam Turbine Blades," Energies, MDPI, vol. 10(9), pages 1-37, August.
    12. Lu, Yuanshen & Klimenko, Alexander & Russell, Hugh & Dai, Yuchen & Warner, John & Hooman, Kamel, 2018. "A conceptual study on air jet-induced swirling plume for performance improvement of natural draft cooling towers," Applied Energy, Elsevier, vol. 217(C), pages 496-508.
    13. Guerra, Omar J. & Reklaitis, Gintaras V., 2018. "Advances and challenges in water management within energy systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 4009-4019.
    14. Yi Ding & Qiang Guo & Wenyuan Guo & Wenxiao Chu & Qiuwang Wang, 2024. "Review of Recent Applications of Heat Pipe Heat Exchanger Use for Waste Heat Recovery," Energies, MDPI, vol. 17(11), pages 1-28, May.
    15. Schmidt, Adam & Albert, Laura A. & Zheng, Kaiyue, 2021. "Risk management for cyber-infrastructure protection: A bi-objective integer programming approach," Reliability Engineering and System Safety, Elsevier, vol. 205(C).
    16. Niu, Jintao & Wang, Jiansheng & Liu, Xueling, 2023. "Thermodynamic and economic analysis of organic Rankine cycle combined with flash cycle and ejector," Energy, Elsevier, vol. 282(C).
    17. Erfan Hassannayebi & Seyed Hessameddin Zegordi & Mohammad Reza Amin-Naseri & Masoud Yaghini, 2017. "Train timetabling at rapid rail transit lines: a robust multi-objective stochastic programming approach," Operational Research, Springer, vol. 17(2), pages 435-477, July.
    18. Petrelli, Marina & Fioriti, Davide & Berizzi, Alberto & Bovo, Cristian & Poli, Davide, 2021. "A novel multi-objective method with online Pareto pruning for multi-year optimization of rural microgrids," Applied Energy, Elsevier, vol. 299(C).
    19. Mavrotas, George & Figueira, José Rui & Siskos, Eleftherios, 2015. "Robustness analysis methodology for multi-objective combinatorial optimization problems and application to project selection," Omega, Elsevier, vol. 52(C), pages 142-155.
    20. Finke, Jonas & Bertsch, Valentin, 2022. "Implementing a highly adaptable method for the multi-objective optimisation of energy systems," MPRA Paper 115504, University Library of Munich, Germany.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:250:y:2022:i:c:s0360544222006065. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.