IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v222y2021ics0360544221001614.html
   My bibliography  Save this article

A novel burner arrangement scheme with annularly combined multiple airflows for wall-tangentially fired pulverized coal boiler

Author

Listed:
  • Li, Zixiang
  • Qiao, Xinqi
  • Miao, Zhengqing

Abstract

To improve the performance of tangentially-fired pulverized boiler, a new burner arrangement scheme with annularly combined multiple airflows is proposed and its performance is thoroughly investigated with a previously validated 660 MW lignite boiler model. Results show that compared with conventional wall-tangentially fired boiler, the in-furnace aerodynamic field under the proposed burner arrangement scheme is obviously improved, embodying as reduced airflow deflections, increased furnace fullness and alleviated phenomenon of airflow scouring furnace walls. Besides, coal combustion behavior is also improved, resulting in increased combustion temperature and enhanced heat transfer process in the main burners’ region. Furthermore, the reduced flue gas swirling intensity mitigates the deviations of flue gas velocity and temperature in the upper furnace region, which finally lowers the unevenness of heat absorption on the suspended heating surfaces. With the improvement of the abovementioned aspects, the safety and economy of tangentially-fired boilers can be largely increased. Considering the increasingly enlarged boiler capacity and the widespread use of low-rank coal, the proposed burner arrangement scheme can be of great use in retrofitting the existing boilers and designing new ones.

Suggested Citation

  • Li, Zixiang & Qiao, Xinqi & Miao, Zhengqing, 2021. "A novel burner arrangement scheme with annularly combined multiple airflows for wall-tangentially fired pulverized coal boiler," Energy, Elsevier, vol. 222(C).
  • Handle: RePEc:eee:energy:v:222:y:2021:i:c:s0360544221001614
    DOI: 10.1016/j.energy.2021.119912
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544221001614
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2021.119912?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Liu, Yacheng & Fan, Weidong & Li, Yu, 2016. "Numerical investigation of air-staged combustion emphasizing char gasification and gas temperature deviation in a large-scale, tangentially fired pulverized-coal boiler," Applied Energy, Elsevier, vol. 177(C), pages 323-334.
    2. Vuthaluru, Hari Babu & Vuthaluru, Rupa, 2010. "Control of ash related problems in a large scale tangentially fired boiler using CFD modelling," Applied Energy, Elsevier, vol. 87(4), pages 1418-1426, April.
    3. Li, Yu & Fan, Weidong, 2016. "Effect of char gasification on NOx formation process in the deep air-staged combustion in a 20kW down flame furnace," Applied Energy, Elsevier, vol. 164(C), pages 258-267.
    4. Li, Zixiang & Miao, Zhengqing & Shen, Xusheng & Li, Jiangtao, 2018. "Prevention of boiler performance degradation under large primary air ratio scenario in a 660 MW brown coal boiler," Energy, Elsevier, vol. 155(C), pages 474-483.
    5. Chen, Shinan & He, Boshu & He, Di & Cao, Yang & Ding, Guangchao & Liu, Xuan & Duan, Zhipeng & Zhang, Xin & Song, Jingge & Li, Xuezheng, 2017. "Numerical investigations on different tangential arrangements of burners for a 600 MW utility boiler," Energy, Elsevier, vol. 122(C), pages 287-300.
    6. Karampinis, E. & Nikolopoulos, N. & Nikolopoulos, A. & Grammelis, P. & Kakaras, E., 2012. "Numerical investigation Greek lignite/cardoon co-firing in a tangentially fired furnace," Applied Energy, Elsevier, vol. 97(C), pages 514-524.
    7. Wang, Junchao & Fan, Weidong & Li, Yu & Xiao, Meng & Wang, Kang & Ren, Peng, 2012. "The effect of air staged combustion on NOx emissions in dried lignite combustion," Energy, Elsevier, vol. 37(1), pages 725-736.
    8. Li, Zixiang & Miao, Zhengqing & Zhou, Yan & Wen, Shurong & Li, Jiangtao, 2018. "Influence of increased primary air ratio on boiler performance in a 660 MW brown coal boiler," Energy, Elsevier, vol. 152(C), pages 804-817.
    9. Hodžić, Nihad & Kazagić, Anes & Smajević, Izet, 2016. "Influence of multiple air staging and reburning on NOx emissions during co-firing of low rank brown coal with woody biomass and natural gas," Applied Energy, Elsevier, vol. 168(C), pages 38-47.
    10. Milićević, Aleksandar & Belošević, Srdjan & Crnomarković, Nenad & Tomanović, Ivan & Tucaković, Dragan, 2020. "Mathematical modelling and optimisation of lignite and wheat straw co-combustion in 350 MWe boiler furnace," Applied Energy, Elsevier, vol. 260(C).
    11. Wu, Xiaofeng & Fan, Weidong & Liu, Yacheng & Bian, Bao, 2019. "Numerical simulation research on the unique thermal deviation in a 1000 MW tower type boiler," Energy, Elsevier, vol. 173(C), pages 1006-1020.
    12. Tan, Houzhang & Niu, Yanqing & Wang, Xuebin & Xu, Tongmo & Hui, Shien, 2011. "Study of optimal pulverized coal concentration in a four-wall tangentially fired furnace," Applied Energy, Elsevier, vol. 88(4), pages 1164-1168, April.
    13. Rahat, Alma A.M. & Wang, Chunlin & Everson, Richard M. & Fieldsend, Jonathan E., 2018. "Data-driven multi-objective optimisation of coal-fired boiler combustion systems," Applied Energy, Elsevier, vol. 229(C), pages 446-458.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Li, Zixiang & Miao, Zhengqing & Qiao, Xinqi, 2023. "Effects of structural parameters of a novel burner scheme with annularly combined multiple airflows on performance of a 660 MW tangentially fired boiler," Energy, Elsevier, vol. 280(C).
    2. Li, Zixiang & Miao, Zhengqing & Han, Baoju & Qiao, Xinqi, 2022. "Effects of the number of wall mounted burners on performance of a 660 MW tangentially fired lignite boiler with annularly combined multiple airflows," Energy, Elsevier, vol. 255(C).
    3. Wenshuai Wang & Mo Yang, 2024. "Numerical and Experimental Study on Nonlinear Phenomena and Thermal Deviation Control in a 1000 MW Tower-Type Boiler," Energies, MDPI, vol. 17(6), pages 1-32, March.
    4. Gu, Tianbao & Ma, Wenchao & Berning, Torsten & Guo, Zhenning & Andersson, Ronnie & Yin, Chungen, 2022. "Advanced simulation of a 750 t/d municipal solid waste grate boiler to better accommodate feedstock changes due to waste classification," Energy, Elsevier, vol. 254(PB).
    5. Wei, Daining & Zhang, Zhichao & Wu, Lining & Wang, Tao & Sun, Baomin, 2023. "Ammonia blend ratio impact on combustion characteristics and NOx emissions during co-firing with sludge and coal in a utility boiler," Energy, Elsevier, vol. 283(C).
    6. Wenshuai Wang & Mo Yang, 2024. "The Nonlinear Flow Characteristics within Two-Dimensional and Three-Dimensional Counterflow Models within Symmetrical Structures," Energies, MDPI, vol. 17(13), pages 1-24, June.
    7. Wangsong Wu & Jiajin Liu & Shuya Guo & Zhukai Zeng & Guangyao Cui & Zhongqing Yang, 2022. "Optimization Research on Burner Arrangement of Landfill Leachate Concentrate Incinerator Based on “3T+E” Principle," Energies, MDPI, vol. 15(16), pages 1-13, August.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zeng, Guang & Xu, Mingchen & Tu, Yaojie & Li, Zhenwei & Cai, Yongtie & Zheng, Zhimin & Tay, Kunlin & Yang, Wenming, 2020. "Influences of initial coal concentration on ignition behaviors of low-NOx bias combustion technology," Applied Energy, Elsevier, vol. 278(C).
    2. Li, Zixiang & Miao, Zhengqing & Shen, Xusheng & Li, Jiangtao, 2018. "Effects of momentum ratio and velocity difference on combustion performance in lignite-fired pulverized boiler," Energy, Elsevier, vol. 165(PA), pages 825-839.
    3. Li, Zixiang & Miao, Zhengqing & Han, Baoju & Qiao, Xinqi, 2022. "Effects of the number of wall mounted burners on performance of a 660 MW tangentially fired lignite boiler with annularly combined multiple airflows," Energy, Elsevier, vol. 255(C).
    4. Li, Zixiang & Qiao, Xinqi & Miao, Zhengqing, 2021. "Low load performance of tangentially-fired boiler with annularly combined multiple airflows," Energy, Elsevier, vol. 224(C).
    5. Li, Zixiang & Miao, Zhengqing & Qiao, Xinqi, 2023. "Effects of structural parameters of a novel burner scheme with annularly combined multiple airflows on performance of a 660 MW tangentially fired boiler," Energy, Elsevier, vol. 280(C).
    6. Liang, Zhanwei & Chen, Hongwei & Zhao, Bin & Jia, Jiandong & Cheng, Kai, 2018. "Synergetic effects of firing gases/coal blends and adopting deep air staging on combustion characteristics," Applied Energy, Elsevier, vol. 228(C), pages 499-511.
    7. Ti, Shuguang & Kuang, Min & Wang, Haopeng & Xu, Guangyin & Niu, Cong & Liu, Yannan & Wang, Zhenfeng, 2020. "Experimental combustion characteristics and NOx emissions at 50% of the full load for a 600-MWe utility boiler: Effects of the coal feed rate for various mills," Energy, Elsevier, vol. 196(C).
    8. Liu, Yacheng & Fan, Weidong & Li, Yu, 2016. "Numerical investigation of air-staged combustion emphasizing char gasification and gas temperature deviation in a large-scale, tangentially fired pulverized-coal boiler," Applied Energy, Elsevier, vol. 177(C), pages 323-334.
    9. Li, Zixiang & Miao, Zhengqing, 2019. "Primary air ratio affects coal utilization mode and NOx emission in lignite pulverized boiler," Energy, Elsevier, vol. 187(C).
    10. Wu, Xiaofeng & Fan, Weidong & Liu, Yacheng & Bian, Bao, 2019. "Numerical simulation research on the unique thermal deviation in a 1000 MW tower type boiler," Energy, Elsevier, vol. 173(C), pages 1006-1020.
    11. Zheng Kong & Jianquan Liu & Changxin Zhou, 2022. "Simulation Research on Thermal Deviation in 700 °C Ultra-Supercritical Boiler," Energies, MDPI, vol. 15(20), pages 1-16, October.
    12. Chen, Zhichao & Wang, Qingxiang & Wang, Bingnan & Zeng, Lingyan & Che, Miaomiao & Zhang, Xin & Li, Zhengqi, 2017. "Anthracite combustion characteristics and NOx formation of a 300MWe down-fired boiler with swirl burners at different loads after the implementation of a new combustion system," Applied Energy, Elsevier, vol. 189(C), pages 133-141.
    13. Chen, Xi & Zhong, Wenqi & Li, Tianyu, 2023. "Fast prediction of temperature and chemical species distributions in pulverized coal boiler using POD reduced-order modeling for CFD," Energy, Elsevier, vol. 276(C).
    14. Zhou, Jing & Zhu, Meng & Su, Sheng & Chen, Lei & Xu, Jun & Hu, Song & Wang, Yi & Jiang, Long & Zhong, Wenqi & Xiang, Jun, 2020. "Numerical analysis and modified thermodynamic calculation methods for the furnace in the 1000 MW supercritical CO2 coal-fired boiler," Energy, Elsevier, vol. 212(C).
    15. Wang, Qingxiang & Chen, Zhichao & Han, Hui & Zeng, Lingyan & Li, Zhengqi, 2019. "Experimental characterization of anthracite combustion and NOx emission for a 300-MWe down-fired boiler with a novel combustion system: Influence of primary and vent air distributions," Applied Energy, Elsevier, vol. 238(C), pages 1551-1562.
    16. Darbandi, Masoud & Fatin, Ali & Bordbar, Hadi, 2020. "Numerical study on NOx reduction in a large-scale heavy fuel oil-fired boiler using suitable burner adjustments," Energy, Elsevier, vol. 199(C).
    17. Yuan, Zhenhua & Chen, Zhichao & Zhang, Bo & Gao, Xuelin & Li, Jiawei & Qiao, Yanyu & Li, Zhengqi, 2023. "Study on the slagging trends of the pre-combustion chamber in industrial pulverized coal boiler under different excess air coefficients by CFD numerical simulation," Energy, Elsevier, vol. 264(C).
    18. Rahimipetroudi, Iman & Rashid, Kashif & Yang, Je Bok & Dong, Sang Keun, 2021. "Development of environment-friendly dual fuel pulverized coal-natural gas combustion technology for the co-firing power plant boiler: Experimental and numerical analysis," Energy, Elsevier, vol. 228(C).
    19. Heydar Maddah & Milad Sadeghzadeh & Mohammad Hossein Ahmadi & Ravinder Kumar & Shahaboddin Shamshirband, 2019. "Modeling and Efficiency Optimization of Steam Boilers by Employing Neural Networks and Response-Surface Method (RSM)," Mathematics, MDPI, vol. 7(7), pages 1-17, July.
    20. Ouyang, Ziqu & Song, Wenhao & Li, Shiyuan & Liu, Jingzhang & Ding, Hongliang, 2020. "Experiment study on NOx emission characteristics of the ultra-low volatile fuel in a 2 MW novel pulverized fuel self-sustained preheating combustor," Energy, Elsevier, vol. 209(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:222:y:2021:i:c:s0360544221001614. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.