IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v218y2021ics036054422032586x.html
   My bibliography  Save this article

An experimental and modeling study on sooting characteristics of laminar counterflow diffusion flames with partial premixing

Author

Listed:
  • Xu, Lei
  • Yan, Fuwu
  • Zhou, Mengxiang
  • Wang, Yu

Abstract

The effects of partial premixing on soot formation were investigated both experimentally and numerically in counterflow diffusion flames (CDFs) of ethylene, propane and ethylene/propane binary mixtures. The partial premixing ratio was maintained at relatively low levels so as to minimize the hydrodynamic effects; while the chemical effects of partial premixing on soot formation can be highlighted. The experimental results and simulations consistently showed that partial premixing notably increased soot formation in ethylene flames; while it slightly reduced the soot formation in propane flames, suggesting that partial premixing played different chemical roles in the soot formation process of ethylene and propane flames. Kinetic analyses revealed that partial premixing showed opposing effects on propargyl formation of ethylene and propane flames; this in turn led to the opposing effects on the formation of benzene and polycyclic aromatic hydrocarbons (PAH), and finally on the soot inception process. For partial premixing in propane/ethylene mixtures, the observed synergistic effects with propane added to ethylene CDFs disappeared, indicating a chemical cross-linking effect between partial premixing and ethylene/propane mixture. In addition, the present soot model showed satisfactory performance in reproducing the mismatch between PAH and soot formation tendencies in ethylene and propane CDFs. This result implies that great care is needed when using PAH concentration as an indicator of sooting tendency of different fuels. The present modeling results provided new insights into the chemical role of partial premixing in the soot evolution process of ethylene, propane and their blends. Further investigations towards the partial premixing effects on soot formation of larger liquid hydrocarbons such as diesel surrogates are required.

Suggested Citation

  • Xu, Lei & Yan, Fuwu & Zhou, Mengxiang & Wang, Yu, 2021. "An experimental and modeling study on sooting characteristics of laminar counterflow diffusion flames with partial premixing," Energy, Elsevier, vol. 218(C).
  • Handle: RePEc:eee:energy:v:218:y:2021:i:c:s036054422032586x
    DOI: 10.1016/j.energy.2020.119479
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S036054422032586X
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2020.119479?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Qiu, Liang & Cheng, Xiaobei & Liu, Bei & Dong, Shijun & Bao, Zufeng, 2016. "Partially premixed combustion based on different injection strategies in a light-duty diesel engine," Energy, Elsevier, vol. 96(C), pages 155-165.
    2. Duan, Jiaqi & Ying, Yaoyao & Liu, Dong, 2019. "Novel nanoscale control on soot formation by local CO2 micro-injection in ethylene inverse diffusion flames," Energy, Elsevier, vol. 179(C), pages 697-708.
    3. Tian, Liang & Liu, Liansheng & Duan, Runze, 2018. "Experimental investigation on oxygen diluted partially premixed and oxygen enriched supplemental combustion for low emission," Energy, Elsevier, vol. 156(C), pages 144-153.
    4. Zhang, Yindi & Liu, Fengshan & Clavel, Daniel & Smallwood, Gregory J. & Lou, Chun, 2019. "Measurement of soot volume fraction and primary particle diameter in oxygen enriched ethylene diffusion flames using the laser-induced incandescence technique," Energy, Elsevier, vol. 177(C), pages 421-432.
    5. Cheng, Xiaobei & Li, Shuai & Yang, Jin & Liu, Bei, 2016. "Investigation into partially premixed combustion fueled with N-butanol-diesel blends," Renewable Energy, Elsevier, vol. 86(C), pages 723-732.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Lopez, Luis & Giusti, Andrea & Gutheil, Eva & Olguin, Hernan, 2022. "On the effects of the fuel injection phase on heat release and soot formation in counterflow flames," Energy, Elsevier, vol. 254(PB).
    2. Qi, Chang & Ding, Jianfei & Wang, Yue & Ning, Ye & Wang, Yalei & Liang, He & Yan, Xingqing & Yu, Jianliang, 2023. "Investigation of the upper flammability limit of ethylene/propane mixtures in air at high temperatures and pressures," Energy, Elsevier, vol. 281(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Arkadiusz Jamrozik & Wojciech Tutak & Karol Grab-Rogaliński, 2021. "Combustion Stability, Performance and Emission Characteristics of a CI Engine Fueled with Diesel/n-Butanol Blends," Energies, MDPI, vol. 14(10), pages 1-20, May.
    2. Jayabal, Ravikumar & Subramani, Sekar & Dillikannan, Damodharan & Devarajan, Yuvarajan & Thangavelu, Lakshmanan & Nedunchezhiyan, Mukilarasan & Kaliyaperumal, Gopal & De Poures, Melvin Victor, 2022. "Multi-objective optimization of performance and emission characteristics of a CRDI diesel engine fueled with sapota methyl ester/diesel blends," Energy, Elsevier, vol. 250(C).
    3. An, Yanzhao & Raman, Vallinayagam & Tang, Qinglong & Shi, Hao & Sim, Jaeheon & Chang, Junseok & Magnotti, Gaetano & Johansson, Bengt, 2019. "Combustion stability study of partially premixed combustion with low-octane fuel at low engine load conditions," Applied Energy, Elsevier, vol. 235(C), pages 56-67.
    4. Ooi, Jong Boon & Ismail, Harun Mohamed & Tan, Boon Thong & Wang, Xin, 2018. "Effects of graphite oxide and single-walled carbon nanotubes as diesel additives on the performance, combustion, and emission characteristics of a light-duty diesel engine," Energy, Elsevier, vol. 161(C), pages 70-80.
    5. Zhang, Qiankun & Xia, Jin & Wang, Jianping & He, Zhuoyao & Zhao, Wenbin & Qian, Yong & Zheng, Liang & Liu, Rui & Lu, Xingcai, 2022. "Experimental study on ignition and combustion characteristics of biodiesel-butanol blends at different injection pressures," Renewable and Sustainable Energy Reviews, Elsevier, vol. 160(C).
    6. Rajesh Kumar, B. & Saravanan, S. & Rana, D. & Nagendran, A., 2016. "Use of some advanced biofuels for overcoming smoke/NOx trade-off in a light-duty DI diesel engine," Renewable Energy, Elsevier, vol. 96(PA), pages 687-699.
    7. Pachiannan, Tamilselvan & Zhong, Wenjun & Rajkumar, Sundararajan & He, Zhixia & Leng, Xianying & Wang, Qian, 2019. "A literature review of fuel effects on performance and emission characteristics of low-temperature combustion strategies," Applied Energy, Elsevier, vol. 251(C), pages 1-1.
    8. Arkadiusz Jamrozik & Wojciech Tutak, 2024. "Alcohols as Biofuel for a Diesel Engine with Blend Mode—A Review," Energies, MDPI, vol. 17(17), pages 1-30, September.
    9. Joo, Seongpil & Choi, Jongwun & Lee, Min Chul & Kim, Namkeun, 2021. "Prognosis of combustion instability in a gas turbine combustor using spectral centroid & spread," Energy, Elsevier, vol. 224(C).
    10. Mourad, M. & Mahmoud, K., 2019. "Investigation into SI engine performance characteristics and emissions fuelled with ethanol/butanol-gasoline blends," Renewable Energy, Elsevier, vol. 143(C), pages 762-771.
    11. Liu, Qianqian & Sun, Jingyun & Li, Shuanglong & Zhang, Feng & Gu, Mingyan & Wang, Yang, 2024. "Study of soot microscopic characteristics in hydrogen/methane/ethylene co-flow diffusion flame," Energy, Elsevier, vol. 290(C).
    12. Hubert Kuszewski & Artur Jaworski, 2024. "Investigating the Effect of 2-Ethylhexyl Nitrate Cetane Improver (2-EHN) on the Autoignition Characteristics of a 1-Butanol–Diesel Blend," Energies, MDPI, vol. 17(16), pages 1-15, August.
    13. Zhen, Xudong & Wang, Yang & Liu, Daming, 2020. "Bio-butanol as a new generation of clean alternative fuel for SI (spark ignition) and CI (compression ignition) engines," Renewable Energy, Elsevier, vol. 147(P1), pages 2494-2521.
    14. Meng, Xiangyu & Zhou, Yihui & Yang, Tianhao & Long, Wuqiang & Bi, Mingshu & Tian, Jiangping & Lee, Chia-Fon F., 2020. "An experimental investigation of a dual-fuel engine by using bio-fuel as the additive," Renewable Energy, Elsevier, vol. 147(P1), pages 2238-2249.
    15. Chiet Choo, Edwin Jia & Cheng, Xinwei & Scribano, Gianfranco & Ng, Hoon Kiat & Gan, Suyin, 2023. "Numerical investigation on the temporal and quasi-steady state soot characteristics of n-dodecane-n-butanol spray combustion," Energy, Elsevier, vol. 268(C).
    16. An, Yanzhao & Tang, Qinglong & Vallinayagam, Raman & Shi, Hao & Sim, Jaeheon & Chang, Junseok & Magnotti, Gaetano & Johansson, Bengt, 2019. "Combustion stability study of partially premixed combustion by high-pressure multiple injections with low-octane fuel," Applied Energy, Elsevier, vol. 248(C), pages 626-639.
    17. Zhang, Tankai & Eismark, Jan & Munch, Karin & Denbratt, Ingemar, 2020. "Effects of a wave-shaped piston bowl geometry on the performance of heavy duty Diesel engines fueled with alcohols and biodiesel blends," Renewable Energy, Elsevier, vol. 148(C), pages 512-522.
    18. Li, Gang & Lee, Timothy H. & Liu, Zhien & Lee, Chiafon F. & Zhang, Chunhua, 2019. "Effects of injection strategies on combustion and emission characteristics of a common-rail diesel engine fueled with isopropanol-butanol-ethanol and diesel blends," Renewable Energy, Elsevier, vol. 130(C), pages 677-686.
    19. Liu, Haifeng & Ma, Guixiang & Hu, Bin & Zheng, Zunqing & Yao, Mingfa, 2018. "Effects of port injection of hydrous ethanol on combustion and emission characteristics in dual-fuel reactivity controlled compression ignition (RCCI) mode," Energy, Elsevier, vol. 145(C), pages 592-602.
    20. Rami Y. Dahham & Haiqiao Wei & Jiaying Pan, 2022. "Improving Thermal Efficiency of Internal Combustion Engines: Recent Progress and Remaining Challenges," Energies, MDPI, vol. 15(17), pages 1-60, August.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:218:y:2021:i:c:s036054422032586x. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.