IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v211y2020ics0360544220318302.html
   My bibliography  Save this article

Dynamic thermo-physical characteristics of high temperature gaseous hydrocarbon fuel thermal power generation for regeneratively cooled hypersonic propulsion system

Author

Listed:
  • Xu, Qing
  • Li, Haowei
  • Feng, Yaoxun
  • Li, Xiaoning
  • Ling, Changming
  • Zhou, Chaoying
  • Qin, Jiang

Abstract

Power generation is urgent needed by the hypersonic air-breathing propulsion system, but the on-board power generation method is heavily restricted by its special structure. The outlet high temperature hydrocarbon fuel of the cooling channel in the hypersonic propulsion system can be used to generate power. However, the hydrocarbon fuel temperature is highly related with hypersonic propulsion system dynamic working conditions. To analyze the dynamic thermos-physical characteristics of high temperature hydrocarbon fuel thermal power generation (TPG) system, a zero-dimensional dynamic analytical model was developed, dynamic characteristics of the TPG system under different working conditions were conducted. Results show that there is overshoot of outlet fuel temperature under flight Mach number increase conditions and fuel equivalence ratio decrease conditions, which can be more than 10 K. Whilst there are both negative and positive overshoot of the generated power under the above working conditions, the largest magnitude of negative and positive overshoot can be more than 1 kW. Furthermore, the dynamic time of outlet fuel temperature and generated power are about 20–30s. Such complexity of dynamic characteristics brings difficulties in fuel supply for the propulsion system.

Suggested Citation

  • Xu, Qing & Li, Haowei & Feng, Yaoxun & Li, Xiaoning & Ling, Changming & Zhou, Chaoying & Qin, Jiang, 2020. "Dynamic thermo-physical characteristics of high temperature gaseous hydrocarbon fuel thermal power generation for regeneratively cooled hypersonic propulsion system," Energy, Elsevier, vol. 211(C).
    • Handle: RePEc:eee:energy:v:211:y:2020:i:c:s0360544220318302
    DOI: 10.1016/j.energy.2020.118722
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544220318302
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2020.118722?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Zhang, Duo & Qin, Jiang & Feng, Yu & Ren, Fengzhi & Bao, Wen, 2014. "Performance evaluation of power generation system with fuel vapor turbine onboard hydrocarbon fueled scramjets," Energy, Elsevier, vol. 77(C), pages 732-741.
    2. Yanhong Wang & Sufen Li & Ming Dong, 2014. "Numerical Study on Heat Transfer Deterioration of Supercritical n-Decane in Horizontal Circular Tubes," Energies, MDPI, vol. 7(11), pages 1-20, November.
    3. Yiwei Dong & Ertai Wang & Yancheng You & Chunping Yin & Zongpu Wu, 2019. "Thermal Protection System and Thermal Management for Combined-Cycle Engine: Review and Prospects," Energies, MDPI, vol. 12(2), pages 1-51, January.
    4. Kunlin Cheng & Yu Feng & Chuanwen Lv & Silong Zhang & Jiang Qin & Wen Bao, 2017. "Performance Evaluation of Waste Heat Recovery Systems Based on Semiconductor Thermoelectric Generators for Hypersonic Vehicles," Energies, MDPI, vol. 10(4), pages 1-16, April.
    5. Tao Cui & Yang Ou, 2019. "Modeling of Scramjet Combustors Based on Model Migration and Process Similarity," Energies, MDPI, vol. 12(13), pages 1-12, June.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Dang, Chaolei & Cheng, Kunlin & Xu, Jing & Fan, Junhao & Qin, Jiang & Liu, Guodong, 2023. "Performance analysis of a thermal management system based on hydrocarbon-fuel regenerative cooling technology for scramjets," Energy, Elsevier, vol. 285(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Liang Guo & Liping Pang & Jingquan Zhao & Xiaodong Yang, 2022. "Optimization of Power and Thermal Management System of Hypersonic Vehicle with Finite Heat Sink of Fuel," Energies, MDPI, vol. 15(15), pages 1-19, July.
    2. Ravi Anant Kishore & Roop L. Mahajan & Shashank Priya, 2018. "Combinatory Finite Element and Artificial Neural Network Model for Predicting Performance of Thermoelectric Generator," Energies, MDPI, vol. 11(9), pages 1-17, August.
    3. Firth, Anton & Zhang, Bo & Yang, Aidong, 2019. "Quantification of global waste heat and its environmental effects," Applied Energy, Elsevier, vol. 235(C), pages 1314-1334.
    4. Feng, Yu & Liu, Yuna & Cao, Yong & Gong, Keyu & Liu, Shuyuan & Qin, Jiang, 2020. "Thermal management evaluation for advanced aero-engines using catalytic steam reforming of hydrocarbon fuels," Energy, Elsevier, vol. 193(C).
    5. Martí Comamala & Ivan Ruiz Cózar & Albert Massaguer & Eduard Massaguer & Toni Pujol, 2018. "Effects of Design Parameters on Fuel Economy and Output Power in an Automotive Thermoelectric Generator," Energies, MDPI, vol. 11(12), pages 1-28, November.
    6. Qin, Jiang & Cheng, Kunlin & Zhang, Silong & Zhang, Duo & Bao, Wen & Han, Jiecai, 2016. "Analysis of energy cascade utilization in a chemically recuperated scramjet with indirect combustion," Energy, Elsevier, vol. 114(C), pages 1100-1106.
    7. Cheng, Kunlin & Qin, Jiang & Zhang, Duo & Bao, Wen & Jing, Wuxing, 2022. "Performance evaluation for a combined power generation system of closed-Brayton-cycle and thermoelectric generator with finite cold source at room temperature on hypersonic vehicles," Energy, Elsevier, vol. 254(PC).
    8. Xiaota Cheng & Yi-Tao Liu & Yang Si & Jianyong Yu & Bin Ding, 2022. "Direct synthesis of highly stretchable ceramic nanofibrous aerogels via 3D reaction electrospinning," Nature Communications, Nature, vol. 13(1), pages 1-8, December.
    9. Liu, Zhan & Zhang, Yilun & Lv, Xinyu & Zhang, Yao & Liu, Junwei & Su, Chuanqi & Liu, Xianglei, 2023. "An electricity supply system by recovering the waste heat of commercial aeroengine," Energy, Elsevier, vol. 283(C).
    10. Dongpeng Jia & Ning Wang & Yu Pan & Chaoyang Liu & Shiwei Wang & Kai Yang & Jian Liu, 2021. "Flow and Heat Transfer Characteristics of Supercritical N-Decane in Adjacent Cooling Channels with Opposite Flow Directions," Energies, MDPI, vol. 14(4), pages 1-19, February.
    11. Jianguo Yan & Shouchun Liu & Pengcheng Guo & Qincheng Bi, 2020. "Experiments on Heat Transfer of Supercritical Pressure Kerosene in Mini Tube under Ultra-High Heat Fluxes," Energies, MDPI, vol. 13(5), pages 1-14, March.
    12. Runlin Zhang & Nuo Xu & Kai Zhang & Lei Wang & Gui Lu, 2023. "A Parametric Physics-Informed Deep Learning Method for Probabilistic Design of Thermal Protection Systems," Energies, MDPI, vol. 16(9), pages 1-20, April.
    13. Wang, Cong & Yu, Xuanfei & Pan, Xin & Qin, Jiang & Huang, Hongyan, 2022. "Thermodynamic optimization of the indirect precooled engine cycle using the method of cascade utilization of cold sources," Energy, Elsevier, vol. 238(PB).
    14. Paweł Tomtas & Amadeusz Skwiot & Elżbieta Sobiecka & Andrzej Obraniak & Katarzyna Ławińska & Tomasz P. Olejnik, 2021. "Bench Tests and CFD Simulations of Liquid–Gas Phase Separation Modeling with Simultaneous Liquid Transport and Mechanical Foam Destruction," Energies, MDPI, vol. 14(6), pages 1-14, March.
    15. Cheng, Kunlin & Yu, Jianchi & Dang, Chaolei & Qin, Jiang & Jing, Wuxing, 2024. "Performance comparison between closed-Brayton-cycle power generation systems using supercritical carbon dioxide and helium–xenon mixture at ultra-high turbine inlet temperatures on hypersonic vehicles," Energy, Elsevier, vol. 293(C).
    16. Jing-Hui Meng & Hao-Chi Wu & Tian-Hu Wang, 2019. "Optimization of Two-Stage Combined Thermoelectric Devices by a Three-Dimensional Multi-Physics Model and Multi-Objective Genetic Algorithm," Energies, MDPI, vol. 12(14), pages 1-24, July.
    17. Yu, Xuanfei & Pan, Xin & Zheng, Jialin & Wang, Cong & Yu, Daren, 2017. "Thermodynamic spectrum of direct precooled airbreathing propulsion," Energy, Elsevier, vol. 135(C), pages 777-787.
    18. Wang, Cong & Yu, Xuanfei & Ha, Chan & Liu, Zekuan & Fang, Jiwei & Qin, Jiang & Shao, Jiahui & Huang, Hongyan, 2023. "Thermodynamic analysis for a novel chemical precooling turbojet engine based on a multi-stage precooling-compression cycle," Energy, Elsevier, vol. 262(PA).
    19. Seyedmatin, Pourya & Karimian, Saeed & Rostamzadeh, Hadi & Amidpour, Majid, 2020. "Electricity and hydrogen co-production via scramjet multi-expansion open cooling cycle coupled with a PEM electrolyzer," Energy, Elsevier, vol. 199(C).
    20. Sun, Hongchuang & Qin, Jiang & Li, Haowei & Huang, Hongyan & Yan, Peigang, 2019. "Research of a combined power and cooling system based on fuel rotating cooling air turbine and organic Rankine cycle on hypersonic aircraft," Energy, Elsevier, vol. 189(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:211:y:2020:i:c:s0360544220318302. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.